Rigol DSA815-TG 9kHz to 1.5GHz with Pre-Amplifier and Tracking Generator Spectrum Analyzer
Available for Quote
- 2012-2014 top selling unit
- 9 kHz to 1.5 GHz Frequency Range
- Typical -135 dBm Displayed Average Noise Level (DANL)
- -80 dBc/Hz @10 kHz offset Phase Noise
- Total Amplitude Uncertainty <1.5 dB
- 10 Hz Minimum Resolution Bandwidth (RBW) (As of 4/1/2017 – Previously 100 Hz)
- Standard with Preamplifier and AM/FM Demodulation Function
- 1.5 GHz Tracking Generator
- 8 inch (800×480 pixels) high-definition display with clear, vivid, and easy to use graphical interface
- Complete connectivity with standard interfaces such as LAN, USB Host, USB Device and GPIB (optional)
- Compact size, light weight 4.25kg (9.4lbs)
Quick Comparison
| Settings | Rigol DSA815-TG 9kHz to 1.5GHz with Pre-Amplifier and Tracking Generator Spectrum Analyzer remove | Instek GRF-1300A Spectrum Analyzer Training Kit with RF Mixer remove | GW Instek GKT-003 4 Piece Return Loss Bridge Kit for Spectrum Analyzer remove | Instek GLN-5040A Line Impedance Stabilization Networ - Line Impedance Stabilization Network [LISN] for GSP-9330 spectrum analyzer remove | GW Instek GTL-301 N-Type RF Cable Assembly for GSP Series Spectrum Analyzer remove | GW Instek GSP-9300TG Spectrum Analyzer; 9KHz-3 GHz, with Factory Installed Tracking Generator remove | ||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Image | |  |  |  |  |  | ||||||||||||||||||||||
| SKU | N_Rigol DSA815-TG | N_GW Instek GRF-1300A | N_GW Instek GKT-003 | N_GW Instek GLN-5040A | N_GW Instek GTL-301 | N_GW Instek GSP-9300TG | ||||||||||||||||||||||
| Rating | ||||||||||||||||||||||||||||
| Price | Available for Quote | Available for Quote | Available for Quote | Available for Quote | Available for Quote | Available for Quote | ||||||||||||||||||||||
| Stock | 14 in stock | |||||||||||||||||||||||||||
| Availability | 14 in stock | |||||||||||||||||||||||||||
| Add to cart | ||||||||||||||||||||||||||||
| Description |
| Kit Contents:RF Trainer, 6 x RF Cable, 2 x Antenna, N to SMA Adapter, Power Card, Software CD, Experiment Book. The GRF-1300A is a well design ed training kit capable of producing a 3MHz baseband signal and a carrier signal up to 900MHz. The GRF-1300A is also able to perform AM and FM RF circuit experiments as well. The practical exercises in the training kit meet the needs of most general RF courses. The GRF-1300A consists of three modules, namely: a baseband module, an RF Synthesizer/FM module and an AM module. The baseband module can simulate a baseband signal and includes sine, square or triangle waveforms. Its output frequency and amplitude are ad justable. During experiments the three kinds of waveforms can be arbitrarily switched back and forth to meet the signaling requirements of each of the different experiments. | The GLN - 5040A Two Line V - Network is used for EMI testing. It provides stable impedance for the EUT terminals and the reference ground within the conducted emissions range. The GLN - 5040A also isolates the unwanted network signals from the power supply unit and only couples the disturbance voltage of the measured device to the receiver. The product's performance is in compliance with the standard requirements of CISPR16 - 1 - 2 for V - networks with a simulated impedance of 50? H + 5 ?) || 50 ? in the frequency range of 9kHz to 30MHz. It uses standard BNC output connector with 50 ? output impedance to match any measurement devices such as receivers and spectrum analyzers. | |||||||||||||||||||||||||
| Content | ||||||||||||||||||||||||||||
| Weight | 15 | 5 | 2 | 12 | 2 | 15 | ||||||||||||||||||||||
| Dimensions | 16 × 8 × 8 in | 14 × 12 × 8 in | 6 × 10 × 4 in | 23 × 18 × 11 in | 9 × 7 × 1 in | N/A | ||||||||||||||||||||||
| Additional information |
|
|
|
|
|
|
