Rigol DSA815-TG 9kHz to 1.5GHz with Pre-Amplifier and Tracking Generator Spectrum Analyzer
Available for Quote
- 2012-2014 top selling unit
- 9 kHz to 1.5 GHz Frequency Range
- Typical -135 dBm Displayed Average Noise Level (DANL)
- -80 dBc/Hz @10 kHz offset Phase Noise
- Total Amplitude Uncertainty <1.5 dB
- 10 Hz Minimum Resolution Bandwidth (RBW) (As of 4/1/2017 – Previously 100 Hz)
- Standard with Preamplifier and AM/FM Demodulation Function
- 1.5 GHz Tracking Generator
- 8 inch (800×480 pixels) high-definition display with clear, vivid, and easy to use graphical interface
- Complete connectivity with standard interfaces such as LAN, USB Host, USB Device and GPIB (optional)
- Compact size, light weight 4.25kg (9.4lbs)
Quick Comparison
| Settings | Rigol DSA815-TG 9kHz to 1.5GHz with Pre-Amplifier and Tracking Generator Spectrum Analyzer remove | GW Instek GTL-302 N-Type RF Cable Assembly for GSP Series Spectrum Analyzer remove | GW Instek GSC-001 Soft Carrying Case for Spectrum Analyzer remove | Instek GLN-5040A Line Impedance Stabilization Networ - Line Impedance Stabilization Network [LISN] for GSP-9330 spectrum analyzer remove | GW Instek GSP-730 Spectrum Analyzer, 150kHz-3GHz Frequency Range remove | GW Instek RLB-001 N-Type Return Loss Bridge for GSP Series Spectrum Analyzer remove | ||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Image | |  |  |  |  |  | ||||||||||||||||||||||||
| SKU | N_Rigol DSA815-TG | N_GW Instek GTL-302 | N_GW Instek GSC-001 | N_GW Instek GLN-5040A | N_GW Instek GSP-730 | N_GW Instek RLB-001 | ||||||||||||||||||||||||
| Rating | ||||||||||||||||||||||||||||||
| Price | Available for Quote | Available for Quote | Available for Quote | Available for Quote | Available for Quote | Available for Quote | ||||||||||||||||||||||||
| Stock | ||||||||||||||||||||||||||||||
| Availability | ||||||||||||||||||||||||||||||
| Add to cart | ||||||||||||||||||||||||||||||
| Description |
| The GLN - 5040A Two Line V - Network is used for EMI testing. It provides stable impedance for the EUT terminals and the reference ground within the conducted emissions range. The GLN - 5040A also isolates the unwanted network signals from the power supply unit and only couples the disturbance voltage of the measured device to the receiver. The product's performance is in compliance with the standard requirements of CISPR16 - 1 - 2 for V - networks with a simulated impedance of 50? H + 5 ?) || 50 ? in the frequency range of 9kHz to 30MHz. It uses standard BNC output connector with 50 ? output impedance to match any measurement devices such as receivers and spectrum analyzers. | GW Instek GSP-730 is a 3 GHz Spectrum Analyzer mainly developed to fulfill the demands of RF Communication educations. Budget constraint and insufficient teaching tools are normally the two hurdles for schools to provide high-quality courses for RF communication experiments. A moderate spectrum analyzer, GSP-730, featuring full functions should provide, along with GRF-1300 training kit possesses a unique position in the field as an economic turn-key solution for 3GHz RF Communication Experiment courses. | Return Loss Bridge [GSP-Series]. Impedance : 50 ohms, N-Type Connector, Source/Load:Female, Couple:Male. 1GHz Return Loss Bridge Compatible with GSP-Series | ||||||||||||||||||||||||||
| Content | ||||||||||||||||||||||||||||||
| Weight | 15 | 2 | 5 | 12 | 8 | 2 | ||||||||||||||||||||||||
| Dimensions | 16 × 8 × 8 in | 9 × 7 × 1 in | 14 × 12 × 8 in | 23 × 18 × 11 in | 14 × 12 × 8 in | 4 × 4 × 4 in | ||||||||||||||||||||||||
| Additional information |
|
|
|
|
|
|
