In Stock

Rigol DSA815-TG 9kHz to 1.5GHz with Pre-Amplifier and Tracking Generator Spectrum Analyzer

Available for Quote

  • 2012-2014 top selling unit
  • 9 kHz to 1.5 GHz Frequency Range
  • Typical -135 dBm Displayed Average Noise Level (DANL)
  • -80 dBc/Hz @10 kHz offset Phase Noise
  • Total Amplitude Uncertainty <1.5 dB
  • 10 Hz Minimum Resolution Bandwidth (RBW) (As of 4/1/2017 – Previously 100 Hz)
  • Standard with Preamplifier and AM/FM Demodulation Function
  • 1.5 GHz Tracking Generator
  • 8 inch (800×480 pixels) high-definition display with clear,  vivid, and easy to use graphical interface
  • Complete connectivity with standard interfaces such as LAN, USB Host, USB Device and GPIB (optional)
  • Compact size, light weight 4.25kg (9.4lbs)
View List
SKU: N_Rigol DSA815-TG Category: Tag:

Quick Comparison

SettingsRigol DSA815-TG 9kHz to 1.5GHz with Pre-Amplifier and Tracking Generator Spectrum Analyzer removeGW Instek Rack Mount Kit for GSP-9300 removeGW Instek GKT-001 4 Piece General Kit for Spectrum Analyzer removeInstek GPA-501 Power Adapter for the AFG-100/200 series Function generators removeInstek GRF-1300A Spectrum Analyzer Training Kit with RF Mixer removeInstek GSP-9300B with Opt. 03 GPIB Interface for GSP-9300 (factory install only) remove
Image
SKUN_Rigol DSA815-TGN_GW Instek GRA-415N_GW Instek GKT-001AN_GW Instek GPL-5010N_GW Instek GRF-1300AN_GW Instek GSP-9300B opt 03
Rating
PriceAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for Quote
Stock
Availability
Add to cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Description
  • 2012-2014 top selling unit
  • 9 kHz to 1.5 GHz Frequency Range
  • Typical -135 dBm Displayed Average Noise Level (DANL)
  • -80 dBc/Hz @10 kHz offset Phase Noise
  • Total Amplitude Uncertainty <1.5 dB
  • 10 Hz Minimum Resolution Bandwidth (RBW) (As of 4/1/2017 - Previously 100 Hz)
  • Standard with Preamplifier and AM/FM Demodulation Function
  • 1.5 GHz Tracking Generator
  • 8 inch (800×480 pixels) high-definition display with clear,  vivid, and easy to use graphical interface
  • Complete connectivity with standard interfaces such as LAN, USB Host, USB Device and GPIB (optional)
  • Compact size, light weight 4.25kg (9.4lbs)
Kit Contents:RF Trainer, 6 x RF Cable, 2 x Antenna, N to SMA Adapter, Power Card, Software CD, Experiment Book. The GRF-1300A is a well design ed training kit capable of producing a 3MHz baseband signal and a carrier signal up to 900MHz. The GRF-1300A is also able to perform AM and FM RF circuit experiments as well. The practical exercises in the training kit meet the needs of most general RF courses. The GRF-1300A consists of three modules, namely: a baseband module, an RF Synthesizer/FM module and an AM module. The baseband module can simulate a baseband signal and includes sine, square or triangle waveforms. Its output frequency and amplitude are ad justable. During experiments the three kinds of waveforms can be arbitrarily switched back and forth to meet the signaling requirements of each of the different experiments.GSP-9300B is a 3GHz spectrum analyzer to meet basic RF measurement requirements. It provides the frequency stability of 0.025ppm; the aging rate of 1ppm/year; a built-in preamplifier; the base noise of -149dBm/Hz, and more than 20 measurement applications, including AM/FM modulation signal analysis, signal channel analysis, and CATV parameter test. While collocating with TG option, GSP-9300B can conduct frequency response or power linearity tests for components.
Content
Weight15521510
Dimensions16 × 8 × 8 in8 × 12 × 4 in6 × 10 × 4 in6 × 8 × 4 in14 × 12 × 8 in14 × 8 × 10 in
Additional information
Weight 15 lbs
Dimensions 16 × 8 × 8 in
Weight 5 lbs
Dimensions 8 × 12 × 4 in
Weight 2 lbs
Dimensions 6 × 10 × 4 in
Weight 1 lbs
Dimensions 6 × 8 × 4 in
Weight 5 lbs
Dimensions 14 × 12 × 8 in
Weight 10 lbs
Dimensions 14 × 8 × 10 in