In Stock

GW Instek Oscilloscope Probe for 150MHz Oscilloscope GDS-300/200 Series

Available for Quote

The GTP-150B-2 is a passive high impedance oscilloscope probe designed and calibrated for use on instrument having an input impedance of 1M? shunted by 20pF. However, it may be compensated for use with instruments having an input capacitance of 10-30pF. The probe incorporates a two position slide switch in the head which selects attenuation of x1,x10 position.

View List
SKU: N_GW Instek GTP-150B-2 Category: Tag:

Quick Comparison

SettingsGW Instek Oscilloscope Probe for 150MHz Oscilloscope GDS-300/200 Series removeProbe Master 4233 Differential Probe, 100MHz, 10X/100X, 700V remove[Renew] Tektronix TPP1000 1 GHz 10x Passive Voltage Probe removeProbe Master 3901-2 Heavy Duty Oscilloscope Probe, 100 MHz, 1X/10X removeGW Instek GCP-206P Current Probe Power Supply with 2 Input Channel, 600mA, 12V removeGW Instek GCP-530 50MHz/30A AC/DC Current Probe remove
Image
SKUN_GW Instek GTP-150B-2N_Probe Master 4233Tektronix TPP1000N_Probe Master 3901-2N_GW Instek GCP-206PN_GW Instek GCP-530
Rating
PriceAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for Quote
Stock
Availability
Add to cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

DescriptionThe GTP-150B-2 is a passive high impedance oscilloscope probe designed and calibrated for use on instrument having an input impedance of 1M? shunted by 20pF. However, it may be compensated for use with instruments having an input capacitance of 10-30pF. The probe incorporates a two position slide switch in the head which selects attenuation of x1,x10 position.
ContentThe GCP-206P two-channel current probe power supplies designed for the GCP-530 and GCP-1030 clamp current probes. The power supplies are ideal for when power is not available from an oscilloscope. Also use for general current measurement applications.With a flat frequency response, low noise and low insertion loss, the GCP-530 and GCP-1030 clamp-on probes are ideal for measuring steady state or transient current in amplifiers, inverters, electric motors, switching power supplies, controllers, sensors, LCD displays and electronic ballasts. For low current measurements, the high signal-to-noise ratio also makes the GCP-530 and GCP-1030 current probes ideal solutions.
Weight20.310.343
Dimensions7 × 10 × 2 in7 × 3 × 2 inN/A7 × 3 × 2 in12 × 10 × 6 in16.93 × 15.35 × 12.2 in
Additional information
Weight 2 lbs
Dimensions 7 × 10 × 2 in
Weight 0.3 lbs
Dimensions 7 × 3 × 2 in
Weight 1 lbs
Weight 0.3 lbs
Dimensions 7 × 3 × 2 in
Weight 4 lbs
Dimensions 12 × 10 × 6 in
Weight 3 lbs
Dimensions 16.93 × 15.35 × 12.2 in