In Stock

GWInstek GPT-9503 AC 150VA Multi-Channel Hipot Tester (AC/DC/IR) Channel Status H or X

Available for Quote

150VA Multi-channels Hipot Tester (H or X)

  • Multi-channel hipot tester
  • Channel status – H or X
  • AC withstanding – 0.05-5kV
  • DC withstanding – 0.05-6kV
  • Insulation resistance – 50-1000V DC / 0.1M – 10G Ω
  • 150VA AC test capacity
  • Built in 8 channel scanner
  • Open / short check (OSC)
  • Arc detection
  • Interface: RS-232C and USB host/device

More Info

Quick Comparison

SettingsGWInstek GPT-9503 AC 150VA Multi-Channel Hipot Tester (AC/DC/IR) Channel Status H or X removeAmprobe PRM-6 Phase Sequence and Motor Rotation Tester removeAmprobe AT-6030 Advanced Wire Tracer Kit removeAmprobe TMA-21HW Hotwire Anemometer with Temperature removeAmprobe AT-2005-A Advanced Wire Tracer removeAEMC 6527 4G Ohm, 250V/500V/1000V Digital Megohmmeter remove
ImagePlaceholder
SKUN_GW Instek GPT-9503N_Amprobe PRM-6N_Amprobe AT-6030N_Amprobe TMA-21HWN_Amprobe AT-2005-AN_AEMC 6527
Rating
PriceAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for Quote
Stock
Availability
Add to cart

Add to cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Description

150VA Multi-channels Hipot Tester (H or X)

  • Multi-channel hipot tester
  • Channel status - H or X
  • AC withstanding - 0.05-5kV
  • DC withstanding - 0.05-6kV
  • Insulation resistance - 50-1000V DC / 0.1M - 10G Ω
  • 150VA AC test capacity
  • Built in 8 channel scanner
  • Open / short check (OSC)
  • Arc detection
  • Interface: RS-232C and USB host/device
More Info
ContentIf you install or connect 3-phase motors and systems, you recognize the importance of verifying the correct motor rotation and wiring phase sequence. Improper connections can cause motors to rotate in reverse direction, potentially damaging the motor and the equipment it is powering.Amprobe?s newest wire tracer combines a Receiver and powerful Transmitter to locate energized and de-energized wires, breakers, and fuses without having to disconnect any equipment. The Receiver features four tracing modes optimized for a range of applications. Its fully automatic breaker tracing capability saves time and eliminates the confusion of multiple false positives by detecting the highest recorded signal in a breaker or fuse. The Transmitter utilizes two optimized frequencies that allows for a clean and reliable signal. The Signal Clamp can be used in applications where there is no access to bare conductors by enabling the Transmitter to induce a signal into a wire through insulation. Whether you?re a novice user or an expert, the AT-6000 Amprobe Advanced Wire Tracer kit will help you get the job done fast.The Amprobe TMA-21HW Hotwire anemometer technology eliminates the use of bearings and rotating parts. When compared to standard bearing type probes, the compact Amprobe hotwire sensor is more reliable (no mechanical moving parts) and allows for easier access to duct and confined spaces. The Amprobe TMA-21HW Hotwire anemometer measures air flow volume and velocity, it features a telescopic probe for positioning the sensor, and is used by HVAC/R technicians to measure wind flow and temperature in air conditioning systems.Like the AT-2004, the Amprobe AT-2005 Wire Tracer traces live wires buried or hidden behind walls up to 13 feet (4 m) thick without interrupting power. However, the AT-2005 electrical wire tracer also includes a battery booster that strengthens the signal for more accurately tracing opens and finding wires in walls. The AT-2005 is used for quickly locating breakers, broken wires, neutrals, grounds, shorts and pinpointing ground faults.
Weight4616282
Dimensions12 × 18 × 24 in4 × 10 × 2 inN/A14 × 11.4 × 3.7 in19.9 × 17.2 × 12.5 in10 × 5 × 5 in
Additional information
Weight 46 lbs
Dimensions 12 × 18 × 24 in
Weight 1 lbs
Dimensions 4 × 10 × 2 in
Weight 6 lbs
Weight 2 lbs
Dimensions 14 × 11.4 × 3.7 in
Weight 8 lbs
Dimensions 19.9 × 17.2 × 12.5 in
Weight 2 lbs
Dimensions 10 × 5 × 5 in