| Description | The Quick Tester Model 8505 is a hand-held instrument for performing quick, basic integrity tests on all transformers and capacitors used by electrical utilities. The Model 8505 verifies transformer winding continuity without requiring a full transformer ratio test. A single user can check a shipment of incoming transformers. Any units that have a defective coil can be quickly pinpointed and turned around for repair. The instrument provides simple, single-button operation whereby the user only needs to make the proper connections and push a button. Test results are clearly indicated by bright LEDs and (when applicable) a buzzer. The instrument includes captive cables with safety clips, a test probe, built-in fuse protection, and operates on four AA batteries. | | Clamp-on Meter Model 675 is a general purpose professional instrument that measures up to the toughest standards. This meter offers a complete set of measurement ranges, AC and DC current, AC and DC voltage, resistance, continuity with beeper, frequency from V or A, and temperature. It is in compliance with international safety and quality standards to ensure professional and reliable measuring tools. This meter is designed to measure and display amps and volts at the same time. It also is auto-ranging and provides the best measurement range and resolution for troubleshooting. | The Clamp-on Meter Model 514 is a general purpose professional instrument that measures up to the toughest standards. It is built into a rugged mechanical case and is designed using quality polycarbonate materials. This meter offers a complete set of measurement ranges and is in compliance with international safety and quality standards to ensure a professional and reliable measuring tool. The Model 514 is auto-ranging and provides the best measurement range and resolution for troubleshooting. It has a high resolution 40A range. The Model 514 measures AC and DC current, AC and DC voltage, resistance, continuity with beeper, and frequency from V or A. It also features a diode test function. The Model 514 also uses Hall sensor technology that provides both DC and AC current measurements to 1000A. The Model 514 is sized for comfortable, one-handed operation. This model is True RMS sensing responding to distorted signal electrical systems. The jaw openingis 1.575" (40mm). | All equipment calibrations do not include any equipment warranty. Equipment that has any visible sign of damage will be documented and the customer will be notified before any services are performed. Any needed repairs will be quoted separately. All of our items will ship with Warranty Void tamper resistant seals. If these seals have been removed or tampered with, the Calibration will be void. | |
| Content | | | | | | The Ground Resistance Tester Model 6416 measures ground rod and grid resistance and impedance without the use of auxiliary rods. Clamp-on ground resistance testers can be used in multi-grounded systems without disconnecting or de-energizing the ground system under test. The Model 6416 simply clamps around the grounding electrode or conductor and measures the resistance to ground. By performing measurements on intact ground systems, the user also verifies the quality of the grounding connections and bonds. Resistance and continuity of grounding loops around pads and buildings may also be measured. |
| Additional information |
| Weight |
5 lbs |
| Dimensions |
5 × 5 × 5 in |
|
| Weight |
6 lbs |
| Dimensions |
6 × 6 × 12 in |
|
| Weight |
9 lbs |
| Dimensions |
6 × 6 × 12 in |
|
| Weight |
9 lbs |
| Dimensions |
6 × 6 × 12 in |
|
| Weight |
8 lbs |
| Dimensions |
10 × 8 × 12 in |
|
| Weight |
3.5 lbs |
| Dimensions |
12 × 5 × 5 in |
|
