In Stock

Instek GTP-100B-4 100 MHz Oscilloscope BNC(P/M) Probe for GDS/GOS/GRS Series

Available for Quote

Instek GTP-100B-4 100 MHz Oscilloscope BNC(P/M) Probe for GDS/GOS/GRS Series. Passive high impedance oscilloscope probe designed and calibrated for use on instruments having an input impedance of 1M? shunted by 20pF. However, it may be compensated for use with instruments having an input capacitance of a 10-35pF. The probe incorporates a two position slide switch in the head which selects attenuation of x1, x10 position.

View List
SKU: N_GW Instek GTP-100B-4 Category: Tag:

Quick Comparison

SettingsInstek GTP-100B-4 100 MHz Oscilloscope BNC(P/M) Probe for GDS/GOS/GRS Series removeProbe Master 4232 Differential Probe, 25MHz, 10X/100X, 1400V removeGW Instek GCP-1030 100MHz/30A AC/DC Current Probe removeGW Instek GCP-530 50MHz/30A AC/DC Current Probe removeGW Instek DC-100KHz/10A Current Probe removeGW Instek GCP-206P Current Probe Power Supply with 2 Input Channel, 600mA, 12V remove
Image
SKUN_GW Instek GTP-100B-4N_Probe Master 4232N_GW Instek GCP-1030N_GW Instek GCP-530N_GW Instek GCP-100N_GW Instek GCP-206P
Rating
PriceAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for Quote
Stock
Availability
Add to cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

DescriptionInstek GTP-100B-4 100 MHz Oscilloscope BNC(P/M) Probe for GDS/GOS/GRS Series. Passive high impedance oscilloscope probe designed and calibrated for use on instruments having an input impedance of 1M? shunted by 20pF. However, it may be compensated for use with instruments having an input capacitance of a 10-35pF. The probe incorporates a two position slide switch in the head which selects attenuation of x1, x10 position.
ContentWith a flat frequency response, low noise and low insertion loss, the GCP-530 and GCP-1030 clamp-on probes are ideal for measuring steady state or transient current in amplifiers, inverters, electric motors, switching power supplies, controllers, sensors, LCD displays and electronic ballasts. For low current measurements, the high signal-to-noise ratio also makes the GCP-530 and GCP-1030 current probes ideal solutions.With a flat frequency response, low noise and low insertion loss, the GCP-530 and GCP-1030 clamp-on probes are ideal for measuring steady state or transient current in amplifiers, inverters, electric motors, switching power supplies, controllers, sensors, LCD displays and electronic ballasts. For low current measurements, the high signal-to-noise ratio also makes the GCP-530 and GCP-1030 current probes ideal solutions.Current probe compatible with oscilloscope series: GDS-3000/2000A/1000A-U. Requires standard 9V battery. The GCP-206P two-channel current probe power supplies designed for the GCP-530 and GCP-1030 clamp current probes. The power supplies are ideal for when power is not available from an oscilloscope. Also use for general current measurement applications.
Weight20.33334
Dimensions7 × 10 × 2 in7 × 3 × 2 in16.93 × 15.35 × 12.2 in16.93 × 15.35 × 12.2 in16.93 × 15.35 × 12.2 in12 × 10 × 6 in
Additional information
Weight 2 lbs
Dimensions 7 × 10 × 2 in
Weight 0.3 lbs
Dimensions 7 × 3 × 2 in
Weight 3 lbs
Dimensions 16.93 × 15.35 × 12.2 in
Weight 3 lbs
Dimensions 16.93 × 15.35 × 12.2 in
Weight 3 lbs
Dimensions 16.93 × 15.35 × 12.2 in
Weight 4 lbs
Dimensions 12 × 10 × 6 in