In Stock

GW Instek GTP-020A-4 BNC Male Connector Probe for 20MHz Analog Oscilloscopes

Available for Quote

The GTP-020A is a passive high impendence oscilloscope probe designed and calibrated for use on instrument having an input impedance of 1MW shunted by 30pF. However, it may be compensated for use with instruments having an input capacitance of 25~45pF. The probe incorporates a two position slide switch in the head which selects attenuation of x1, x10 position.

View List
SKU: N_GW Instek GTP-020A-4 Category: Tag:

Quick Comparison

SettingsGW Instek GTP-020A-4 BNC Male Connector Probe for 20MHz Analog Oscilloscopes removeGW Instek GCP-530 50MHz/30A AC/DC Current Probe removeProbe Master 4222 Differential Probe, 200MHz, 10X, 60V removeProbe Master 4231 Differential Probe, 25MHz, 20X/200X, 1400V removeProbe Master 4901-1KRA Passive Voltage Probe with Readout, 150MHz, 1X/10X, 600V, 3.5ft, DELUXE KIT removeGW Instek 40Hz-10KHz/20A Current Probe remove
Image
SKUN_GW Instek GTP-020A-4N_GW Instek GCP-530N_Probe Master 4222N_Probe Master 4231N_Probe Master 4901-1KRAN_GW Instek GCP-020
Rating
PriceAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for Quote
Stock
Availability
Add to cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

DescriptionThe GTP-020A is a passive high impendence oscilloscope probe designed and calibrated for use on instrument having an input impedance of 1MW shunted by 30pF. However, it may be compensated for use with instruments having an input capacitance of 25~45pF. The probe incorporates a two position slide switch in the head which selects attenuation of x1, x10 position.
ContentWith a flat frequency response, low noise and low insertion loss, the GCP-530 and GCP-1030 clamp-on probes are ideal for measuring steady state or transient current in amplifiers, inverters, electric motors, switching power supplies, controllers, sensors, LCD displays and electronic ballasts. For low current measurements, the high signal-to-noise ratio also makes the GCP-530 and GCP-1030 current probes ideal solutions.
  • 18 Piece Kit with Case
  • Low Resistance Gold Contacts
  • Switchable Readout Actuator
  • Interchangable Tips (.030in and .055in diameter)
  • Accessory Kit: Sprung Hook, 6" Ground Lead, Trimmer Tool, I.C. Test Tip, Tip Insulator, Spare Tip, BNC Adapter, Channel Markers, 12" Ground Lead, Pincer Hook, Pico Hook,Wire Wrap Tip, Wire Wrap Ground, Alligator Tip, High Frequency Ground, Extender Tip 4", and Black Vinyl 3 Fold Pouch.
Current probe compatible with oscilloscope series: GDS-3000/2000A/1000A-U. No battery/power supply required.
Weight230.30.312
Dimensions7 × 10 × 2 in16.93 × 15.35 × 12.2 in7 × 3 × 2 in7 × 3 × 2 inN/A8 × 10 × 6 in
Additional information
Weight 2 lbs
Dimensions 7 × 10 × 2 in
Weight 3 lbs
Dimensions 16.93 × 15.35 × 12.2 in
Weight 0.3 lbs
Dimensions 7 × 3 × 2 in
Weight 0.3 lbs
Dimensions 7 × 3 × 2 in
Weight 1 lbs
Weight 2 lbs
Dimensions 8 × 10 × 6 in