| Description | 500VA OUTPUT; AC Power Source
500VA Programmable AC Power Source
4.3 inch TFT-LCD Display, Only 88mm(2U) case height
Output Capacity: APS-7050(500VA), APS-7100 (1000VA)
Arbitrary Waveform Function
Surge/ Dip control for output artificial surges or dips in voltage to a DUT
Measurement function comprises Voltage, Current, Power, Apparent Power, Current(peak), IPKH, Frequency, Power Factor, Crest Factor
10 sets of the Sequence mode, Simulate mode, and Programming mode
10 sets of Preset allow users to store ten settings
Support Sequence, Simulate, and Program to automatically execute output after the equipment power is on
Support SCPI Emulation, LabVIEW Driver
Standard interface: USB Host, LAN
Support remoter control: Sync Output, Program mode signal output, Trigger In/Out, Output on/off | 192W Single Channel DC Power Supply
GPE-1326 Single Channel, 192W Linear DC Power Supply
1 Independent Isolated Output
10mv min resolution 1ma min resolution
4.3 Inch LCD Display
Setting & Read back Resolution 10mA / 1mA
Output ON/OFF
Analog Control (Remote I/O) for Output ON / OFF
Set View function for checking an original V / I setting during output on
Key Lock Function
Tracking series and parallel operation
Smart cooling fan achieving low noise
Optional European Jack Type Terminal | Hybrid Linear, Low noise, 0-20V/0-36A, 720W
- Output Voltage Rating： 20V
- Output Power： 720W
- Low Ripple and Noise (0.5mVrms/ 10mArms)
- Fast transition recovery time (100us)
- Maximum 2 units in series connections or 3 units in parallel connections
- Select the setting digits for voltage and current (coarse/ fine volume control)
- Panel Lock Function
- 3 set of preset function
- Output off timer function (Range: 1min to 1000hours & 59mins)
- CC priority function (prevent overshoot & inrush current)
- Sequence function of PC editing (Max.: 1000 steps/ Min. step period: 50ms)
- Protection: OVP, UVP, OCP, remote sensing (Terminal open)
- External Analog Control Function
- PC Remote Interface (Standard)： RS-232; (Optional)： GPIB / USB / LAN
- CE Compliance
| 195W, 4ch Output DC Programmable Power Supply
4 Outputs for GPD-4303S
High Resolution Display 1mV / 1mA (GPD-X303S)
CH1/CH2 Output: 30V / 3A
CH3 Selectable Output: 5V/3A ; 5.001V-10V /1A (GPD-4303S)
CH4 Output: 5V / 1A (GPD-4303S)
Auto Series / Parallel Tracking Mode
Digital Panel ControlRotary Encoder Switch and Rubber Key with Backlight
4 Sets SAVE / RECALL panel setting
User Friendly Operation, Coarse and Fine Voltage Control
Warring Buzzer
Output On / Off Switch
USB Device for Remote Control (Baud Rate 115200 bps Maximum)
Free downloadable PC software
Smart Cooling Fan with Low Noise
Safety Design: Reverse Polarity, Overload Protection | 90W DC Linear Power Supply 0-30V, 0-3A DIGITAL Display
- 0-3A DIGITAL
- Light and Compact Design
- 0.01% High Regulation
- Constant Voltage and Constant Current Operation
- Remote Control for External Programmability
- Internal Select for Continuous or Dynamic Load
- Low Ripple and Noise
- Overload and Reverse Polarity Protection
- Series or Parallel Operation
| |
| Additional information |
| Weight |
55 lbs |
| Dimensions |
25 × 24 × 11 in |
|
| Weight |
15 lbs |
| Dimensions |
20 × 15 × 11 in |
|
| Weight |
15 lbs |
| Dimensions |
18 × 12 × 10 in |
|
| Weight |
18 lbs |
| Dimensions |
22 × 15 × 12 in |
|
| Weight |
15 lbs |
| Dimensions |
18 × 12 × 10 in |
|
| Weight |
2 lbs |
| Dimensions |
4 × 6 × 2 in |
|
