In Stock

Instek APS-7050 500VA Programmable AC Power Source 4.2Arms 310Vrms

Available for Quote

500VA OUTPUT; AC Power Source

500VA Programmable AC Power Source
4.3 inch TFT-LCD Display, Only 88mm(2U) case height
Output Capacity: APS-7050(500VA), APS-7100 (1000VA)
Arbitrary Waveform Function
Surge/ Dip control for output artificial surges or dips in voltage to a DUT
Measurement function comprises Voltage, Current, Power, Apparent Power, Current(peak), IPKH, Frequency, Power Factor, Crest Factor
10 sets of the Sequence mode, Simulate mode, and Programming mode
10 sets of Preset allow users to store ten settings
Support Sequence, Simulate, and Program to automatically execute output after the equipment power is on
Support SCPI Emulation, LabVIEW Driver
Standard interface: USB Host, LAN
Support remoter control: Sync Output, Program mode signal output, Trigger In/Out, Output on/off

View List
SKU: N_GW Instek APS-7050 Category: Tag:

Quick Comparison

SettingsInstek APS-7050 500VA Programmable AC Power Source 4.2Arms 310Vrms removeGW Instek GPR-0830HD Series GPR-H Single Output Linear DC Power Supply with LED Display, 30 Output Amps, 8 Output Volts, 240 Output Watts removeGW Instek GPR-1820HD Series GPR-H Single Output Linear DC Power Supply with LED Display, 0-18V 0-20A, 360W removeInstek PSU-03B Bus Bar for 4 units in parallel operation removeInstek GPD-4303S 200W Quadruple-Output Programmable Linear DC Power Supply, 30V DC, 3 Amp, 1mV, 1-milliamp Resolution removeGW Instek PLR 20-18 DC Power Supply, 20V, 18A, 360W Low Noise remove
Image
SKUN_GW Instek APS-7050N_GW Instek GPR-0830HDN_GW Instek GPR-1820HDN_GW Instek PSU-03BN_GW Instek GPD-4303SN_GW Instek PLR 20-18
Rating
PriceAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for Quote
Stock
Availability
Add to cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Description500VA OUTPUT; AC Power Source 500VA Programmable AC Power Source 4.3 inch TFT-LCD Display, Only 88mm(2U) case height Output Capacity: APS-7050(500VA), APS-7100 (1000VA) Arbitrary Waveform Function Surge/ Dip control for output artificial surges or dips in voltage to a DUT Measurement function comprises Voltage, Current, Power, Apparent Power, Current(peak), IPKH, Frequency, Power Factor, Crest Factor 10 sets of the Sequence mode, Simulate mode, and Programming mode 10 sets of Preset allow users to store ten settings Support Sequence, Simulate, and Program to automatically execute output after the equipment power is on Support SCPI Emulation, LabVIEW Driver Standard interface: USB Host, LAN Support remoter control: Sync Output, Program mode signal output, Trigger In/Out, Output on/off240W DC Linear Power Supply 0-8V, 0-30A 0-8V, 0-30A 0.01% High Regulation Constant Voltage and Constant Current Operation Internal Select for Continuous or Dynamic Load Low Ripple and Noise Overload and Reverse Polarity Protection 3 1/2 Digit 0.5" LED Display360W DC Linear Power Supply 0-18V, 0-20A 0-18V, 0-20A 0.01% High Regulation Constant Voltage and Constant Current Operation Internal Select for Continuous or Dynamic Load Low Ripple and Noise Overload and Reverse Polarity Protection 3 1/2 Digit 0.5" LED Display195W, 4ch Output DC Programmable Power Supply 4 Outputs for GPD-4303S High Resolution Display 1mV / 1mA (GPD-X303S) CH1/CH2 Output: 30V / 3A CH3 Selectable Output: 5V/3A ; 5.001V-10V /1A (GPD-4303S) CH4 Output: 5V / 1A (GPD-4303S) Auto Series / Parallel Tracking Mode Digital Panel ControlRotary Encoder Switch and Rubber Key with Backlight 4 Sets SAVE / RECALL panel setting User Friendly Operation, Coarse and Fine Voltage Control Warring Buzzer Output On / Off Switch USB Device for Remote Control (Baud Rate 115200 bps Maximum) Free downloadable PC software Smart Cooling Fan with Low Noise Safety Design: Reverse Polarity, Overload Protection

Hybrid Linear, Low noise, 0-20V/0-18A, 360W

  • Output Voltage Rating: 20V
  • Output Power: 360W
  • Low Ripple and Noise (0.5mVrms/ 10mArms)
  • Fast transition recovery time (100us)
  • Maximum 2 units in series connections or 3 units in parallel connections
  • Select the setting digits for voltage and current (coarse/ fine volume control)
  • Panel Lock Function
  • 3 set of preset function
  • Output off timer function (Range: 1min to 1000hours & 59mins)
  • CC priority function (prevent overshoot & inrush current)
  • Sequence function of PC editing (Max.: 1000 steps/ Min. step period: 50ms)
  • Protection: OVP, UVP, OCP, remote sensing (Terminal open)
  • External Analog Control Function
  • PC Remote Interface (Standard): RS-232; (Optional): GPIB / USB / LAN
  • CE Compliance
Content
Weight55151521815
Dimensions25 × 24 × 11 in18 × 12 × 10 in18 × 12 × 10 in4 × 6 × 2 in22 × 15 × 12 in18 × 12 × 10 in
Additional information
Weight 55 lbs
Dimensions 25 × 24 × 11 in
Weight 15 lbs
Dimensions 18 × 12 × 10 in
Weight 15 lbs
Dimensions 18 × 12 × 10 in
Weight 2 lbs
Dimensions 4 × 6 × 2 in
Weight 18 lbs
Dimensions 22 × 15 × 12 in
Weight 15 lbs
Dimensions 18 × 12 × 10 in