In Stock

Instek APS-7050 500VA Programmable AC Power Source 4.2Arms 310Vrms

Available for Quote

500VA OUTPUT; AC Power Source

500VA Programmable AC Power Source
4.3 inch TFT-LCD Display, Only 88mm(2U) case height
Output Capacity: APS-7050(500VA), APS-7100 (1000VA)
Arbitrary Waveform Function
Surge/ Dip control for output artificial surges or dips in voltage to a DUT
Measurement function comprises Voltage, Current, Power, Apparent Power, Current(peak), IPKH, Frequency, Power Factor, Crest Factor
10 sets of the Sequence mode, Simulate mode, and Programming mode
10 sets of Preset allow users to store ten settings
Support Sequence, Simulate, and Program to automatically execute output after the equipment power is on
Support SCPI Emulation, LabVIEW Driver
Standard interface: USB Host, LAN
Support remoter control: Sync Output, Program mode signal output, Trigger In/Out, Output on/off

View List
SKU: N_GW Instek APS-7050 Category: Tag:

Quick Comparison

SettingsInstek APS-7050 500VA Programmable AC Power Source 4.2Arms 310Vrms removeInstek PSU-03B Bus Bar for 4 units in parallel operation removeGW Instek GPE-1326 Multi-Output DC Power Supply, Single Channel, 192W, 0-32 VDC, 0-6A removeGW Instek GPS-1830D High-Current, Single-Output DC Power Supply, 0 to 18 VDC, 0 to 3 A removeInstek GPD-3303S 195W Triple-Output Programmable Linear DC Power Supply, 30V DC, 3 Amp, 1mV, 1-milliamp Resolution removeInstek GPD-4303S 200W Quadruple-Output Programmable Linear DC Power Supply, 30V DC, 3 Amp, 1mV, 1-milliamp Resolution remove
Image
SKUN_GW Instek APS-7050N_GW Instek PSU-03BN_GW Instek GPE-1326N_GW Instek GPS-1830DN_GW Instek GPD-3303SN_GW Instek GPD-4303S
Rating
PriceAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for Quote
Stock
Availability
Add to cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Description500VA OUTPUT; AC Power Source 500VA Programmable AC Power Source 4.3 inch TFT-LCD Display, Only 88mm(2U) case height Output Capacity: APS-7050(500VA), APS-7100 (1000VA) Arbitrary Waveform Function Surge/ Dip control for output artificial surges or dips in voltage to a DUT Measurement function comprises Voltage, Current, Power, Apparent Power, Current(peak), IPKH, Frequency, Power Factor, Crest Factor 10 sets of the Sequence mode, Simulate mode, and Programming mode 10 sets of Preset allow users to store ten settings Support Sequence, Simulate, and Program to automatically execute output after the equipment power is on Support SCPI Emulation, LabVIEW Driver Standard interface: USB Host, LAN Support remoter control: Sync Output, Program mode signal output, Trigger In/Out, Output on/off192W Single Channel DC Power Supply GPE-1326 Single Channel, 192W Linear DC Power Supply 1 Independent Isolated Output 10mv min resolution 1ma min resolution 4.3 Inch LCD Display Setting & Read back Resolution 10mA / 1mA Output ON/OFF Analog Control (Remote I/O) for Output ON / OFF Set View function for checking an original V / I setting during output on Key Lock Function Tracking series and parallel operation Smart cooling fan achieving low noise Optional European Jack Type Terminal54W DC Linear Power Supply 0-18V, 0-3A DIGITAL Display 0-3A DIGITAL Light and Compact Design 0.01% High Regulation Constant Voltage and Constant Current Operation Remote Control for External Programmability Internal Select for Continuous or Dynamic Load Low Ripple and Noise Overload and Reverse Polarity Protection Series or Parallel Operation0-30Vx2,0-3Ax2; 2.5V/3.3V/5V,3A, USB; 4 3/4 digit Three Independent Output : 30V/3A x 2, 2.5V/3.3V/5V/3A x 1 4 LED Display Sets : 3 Digits After Decimal Point Minimum Resolution : 1mV/1mA Digital Panel Control (Rotary Encoder Switch, Rubber Key With Indicator) Key-Lock User-Friendly Operation, Coarse/Fine Voltage Control 4 Panel Settings Save/Recall (Plus Factory Settings Recall) Output ON/OFF Tracking Series and Parallel Mode USB Device for Remote Control (Baud Rate 115200 bps Maximum) Free downloadable PC software Smart Cooling Fan Achieving Low Noise Warning Buzzer Light-Weight and Compact Design195W, 4ch Output DC Programmable Power Supply 4 Outputs for GPD-4303S High Resolution Display 1mV / 1mA (GPD-X303S) CH1/CH2 Output: 30V / 3A CH3 Selectable Output: 5V/3A ; 5.001V-10V /1A (GPD-4303S) CH4 Output: 5V / 1A (GPD-4303S) Auto Series / Parallel Tracking Mode Digital Panel ControlRotary Encoder Switch and Rubber Key with Backlight 4 Sets SAVE / RECALL panel setting User Friendly Operation, Coarse and Fine Voltage Control Warring Buzzer Output On / Off Switch USB Device for Remote Control (Baud Rate 115200 bps Maximum) Free downloadable PC software Smart Cooling Fan with Low Noise Safety Design: Reverse Polarity, Overload Protection
Content
Weight55215151818
Dimensions25 × 24 × 11 in4 × 6 × 2 in20 × 15 × 11 in18 × 12 × 10 in18 × 12 × 10 in22 × 15 × 12 in
Additional information
Weight 55 lbs
Dimensions 25 × 24 × 11 in
Weight 2 lbs
Dimensions 4 × 6 × 2 in
Weight 15 lbs
Dimensions 20 × 15 × 11 in
Weight 15 lbs
Dimensions 18 × 12 × 10 in
Weight 18 lbs
Dimensions 18 × 12 × 10 in
Weight 18 lbs
Dimensions 22 × 15 × 12 in