| Content | | GCL-001 Vertical Calibration Cable For GDS-300/200 Series | The GDS-2000E digital oscilloscope features bandwidth selections of 200MHz, 100MH, and 70MHz. Two-channel model provides 1GSa/s real-time sampling rate for each channel; four-channel model provides 1GSa/s maximum real-time sampling rate. The 8-inch 800*480 TFT LCD display and the minimum 1mV/div vertical range allow the GDS-2000E series to measure complex feeble signals and clearly display measurement results. | GPIB Interface module for GDS-2000A series | Serial Bus Analysis Software I2C / SPI/ UART (for 4 channel model only). Compatible with GDS-3154, GDS-3254, and GDS-3354 Digital Oscilloscopes | GDS-2000A Series Digital Storage Oscilloscope offers 2 and 4-channel configurations and wide bandwidth selections, including 300MHz, 200MHz, 100MHz and 70MHz. Each model provides 2GSa/s maximum real-time sampling rate and 100GSa/s high-speed equivalent-time sampling rate. Equipped with an 8-inch 800 x 600 high-resolution TFT LCD display, 1mV/div to 10V/div vertical range and 1ns/div to 100s/div time base, the GDS-2000A Series is able to faithfully demonstrate waveforms of complicated and obscure signals. |
| Additional information |
| Weight |
5 lbs |
| Dimensions |
8 × 12 × 4 in |
|
| Weight |
1 lbs |
| Dimensions |
4 × 6 × 2 in |
|
| Weight |
12 lbs |
| Dimensions |
21 × 16 × 10 in |
|
| Weight |
1 lbs |
| Dimensions |
6 × 8 × 4 in |
|
| Weight |
0.5 lbs |
| Dimensions |
4 × 4 × 2 in |
|
| Weight |
12 lbs |
| Dimensions |
22 × 15 × 12 in |
|
