In Stock

Megohmmeter Model 6529 (Digital, 50V, 100V, 250V, 500V, 1kV,420k-Ohm, V, Continuity, Alarm & Timer, PI/DAR)

Available for Quote

Model 6529 is a low cost 1000V hand-held instrument that offers Multimeter functions as well as Megohmmeter functions. This model is created for the commercial, industrial and contractor markets and is simple to use. It’s priced at a point tailored to contractors and independent electricians that need to check the quality of insulation as well as perform basic electrical measurements.

View List
SKU: N_AEMC 6529 Category: Tag:

Quick Comparison

SettingsMegohmmeter Model 6529 (Digital, 50V, 100V, 250V, 500V, 1kV,420k-Ohm, V, Continuity, Alarm & Timer, PI/DAR) removeClamp-on Meter Model 203 (TRMS, 1000VAC/DC, 600AAC/900ADC, Ohms, Continuity, Temperature) removePower Clamp-on Meter Model 407 (TRMS, 1000VAC/DC, 1000AAC/1500ADC, Ohms, Continuity, Energy, Harmonics, Power, THD, Recording ) removeAEMC 6418 Ground Resistance Tester removeAEMC 6416 Ground Resistance Tester removeAEMC 6527 4G Ohm, 250V/500V/1000V Digital Megohmmeter remove
Image
SKUN_AEMC 6529N_AEMC 203N_AEMC 407N_AEMC 6418N_AEMC 6416N_AEMC 6527
Rating
PriceAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for Quote
Stock
Availability
Add to cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

DescriptionModel 6529 is a low cost 1000V hand-held instrument that offers Multimeter functions as well as Megohmmeter functions. This model is created for the commercial, industrial and contractor markets and is simple to use. It's priced at a point tailored to contractors and independent electricians that need to check the quality of insulation as well as perform basic electrical measurements.
ContentThe Ground Resistance Tester Model 6418 measures ground rod, busbar, and grid resistance and impedance without the use of auxiliary rods. Clamp-on ground resistance testers can be used in multi-grounded systems without disconnecting or de-energizing the ground system under test. The Model 6418 simply clamps around the grounding electrode or conductor and measures the resistance to ground. By performing measurements on intact ground systems, the user also verifies the quality of the grounding connections and bonds. Resistance and continuity of grounding loops around pads and buildings may also be measured.The Ground Resistance Tester Model 6416 measures ground rod and grid resistance and impedance without the use of auxiliary rods. Clamp-on ground resistance testers can be used in multi-grounded systems without disconnecting or de-energizing the ground system under test. The Model 6416 simply clamps around the grounding electrode or conductor and measures the resistance to ground. By performing measurements on intact ground systems, the user also verifies the quality of the grounding connections and bonds. Resistance and continuity of grounding loops around pads and buildings may also be measured.
Weight7993.53.52
Dimensions12 × 10 × 8 in6 × 6 × 12 in6 × 6 × 12 in12 × 5 × 5 in12 × 5 × 5 in10 × 5 × 5 in
Additional information
Weight 7 lbs
Dimensions 12 × 10 × 8 in
Weight 9 lbs
Dimensions 6 × 6 × 12 in
Weight 9 lbs
Dimensions 6 × 6 × 12 in
Weight 3.5 lbs
Dimensions 12 × 5 × 5 in
Weight 3.5 lbs
Dimensions 12 × 5 × 5 in
Weight 2 lbs
Dimensions 10 × 5 × 5 in