In Stock

Megohmmeter Model 6528 (Digital, 250V, 500V, 1kV, 420K-Ohm, V, Continuity, Alarm & Timer)

Available for Quote

Model 6528 is a low cost 1000V hand-held instrument that offers Multimeter functions as well as Megohmmeter functions. This model is created for the commercial, industrial and contractor markets and is simple to use. It’s priced at a point tailored to contractors and independent electricians that need to check the quality of insulation as well as perform basic electrical measurements.

View List
SKU: N_AEMC 6528 Category: Tag:

Quick Comparison

SettingsMegohmmeter Model 6528 (Digital, 250V, 500V, 1kV, 420K-Ohm, V, Continuity, Alarm & Timer) removeAEMC 6420 Micro-Ohmmeter, 10-Amp, 1µ Ohms to 400 Ohms removeCalibration of AEMC 4620 Ground Resistance Tester NIST Calibration with Certificate removeAEMC 6418 Ground Resistance Tester removePower Clamp-on Meter Model 605 (TRMS, 1000VAC/DC, 2000AAC/3000ADC, Ohms, Continuity, Phase Rotation, Power, THD) removeClamp-on Meter Model 403 (TRMS, 1000VAC/DC, 1000AAC/1500ADC, Ohms, Continuity, Temperature) remove
Image
SKUN_AEMC 6528N_AEMC 6240C_AEMC 4620N_AEMC 6418N_AEMC 605N_AEMC 403
Rating
PriceAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for Quote
Stock
Availability
Add to cart

Add to Cart

Add to Cart

Instant Quote

Add to Cart

Add to Cart

Add to Cart

DescriptionModel 6528 is a low cost 1000V hand-held instrument that offers Multimeter functions as well as Megohmmeter functions. This model is created for the commercial, industrial and contractor markets and is simple to use. It's priced at a point tailored to contractors and independent electricians that need to check the quality of insulation as well as perform basic electrical measurements.All equipment calibrations do not include any equipment warranty. Equipment that has any visible sign of damage will be documented and the customer will be notified before any services are performed. Any needed repairs will be quoted separately. All of our items will ship with Warranty Void tamper resistant seals. If these seals have been removed or tampered with, the Calibration will be void.
ContentThe Ground Resistance Tester Model 6418 measures ground rod, busbar, and grid resistance and impedance without the use of auxiliary rods. Clamp-on ground resistance testers can be used in multi-grounded systems without disconnecting or de-energizing the ground system under test. The Model 6418 simply clamps around the grounding electrode or conductor and measures the resistance to ground. By performing measurements on intact ground systems, the user also verifies the quality of the grounding connections and bonds. Resistance and continuity of grounding loops around pads and buildings may also be measured.
Weight71083.599
Dimensions12 × 10 × 8 in12 × 12 × 10 in10 × 8 × 12 in12 × 5 × 5 in6 × 6 × 12 in6 × 6 × 12 in
Additional information
Weight 7 lbs
Dimensions 12 × 10 × 8 in
Weight 10 lbs
Dimensions 12 × 12 × 10 in
Weight 8 lbs
Dimensions 10 × 8 × 12 in
Weight 3.5 lbs
Dimensions 12 × 5 × 5 in
Weight 9 lbs
Dimensions 6 × 6 × 12 in
Weight 9 lbs
Dimensions 6 × 6 × 12 in