In Stock

GW Instek LCR-916 Handheld LCR Meter, 100/120Hz/1/10/100kHz Selectable Test Frequency

Available for Quote

The LCR-916 is a smart, convenient and fully-functional dual display handheld LCR meter. The test frequency extends as high as 10 kHz, providing greater flexibility to test a wider range of components.The LCR-916 uses a dual 20,000/2000 count display.

View List
SKU: N_GW Instek LCR-916 Category: Tag:

Quick Comparison

SettingsGW Instek LCR-916 Handheld LCR Meter, 100/120Hz/1/10/100kHz Selectable Test Frequency removeGW Instek GPS-3030D High-Current, Single-Output DC Power Supply, 0 to 30 VDC, 0 to 3 A, 90W removeGW Instek GPR-3510HD Single Output Linear DC Power Supply with LED Display, 10 Output Amps, 35 Output Volts, 350 Output Watts removeInstek PSU-03B Bus Bar for 4 units in parallel operation removeInstek PSU-03C Cable for 4 units in parallel operation removeGW Instek GPD-2303S 180W Dual-Output Programmable Linear DC Power Supply, 30V DC, 3 Amp remove
Image
SKUN_GW Instek LCR-916N_GW Instek GPS-3030DN_GW Instek GPR-3510HDN_GW Instek PSU-03BN_GW Instek PSU-03CN_GW Instek GPD-2303S
Rating
PriceAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for Quote
Stock
Availability
Add to cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

DescriptionThe LCR-916 is a smart, convenient and fully-functional dual display handheld LCR meter. The test frequency extends as high as 10 kHz, providing greater flexibility to test a wider range of components.The LCR-916 uses a dual 20,000/2000 count display.

90W DC Linear Power Supply 0-30V, 0-3A DIGITAL Display

  • 0-3A DIGITAL
  • Light and Compact Design
  • 0.01% High Regulation
  • Constant Voltage and Constant Current Operation
  • Remote Control for External Programmability
  • Internal Select for Continuous or Dynamic Load
  • Low Ripple and Noise
  • Overload and Reverse Polarity Protection
  • Series or Parallel Operation
350W DC Linear Power Supply 0-35V, 0-10A 0-35V, 0-10A 0.01% High Regulation Constant Voltage and Constant Current Operation Internal Select for Continuous or Dynamic Load Low Ripple and Noise Overload and Reverse Polarity Protection 3 1/2 Digit 0.5" LED Display180W, 2ch Output DC Programmable Power Supply 4 Outputs for GPD-4303S High Resolution Display 1mV / 1mA (GPD-X303S) CH1/CH2 Output: 30V / 3A CH3 Selectable Output: 5V/3A ; 5.001V-10V /1A (GPD-4303S) CH4 Output: 5V / 1A (GPD-4303S) Auto Series / Parallel Tracking Mode Digital Panel ControlRotary Encoder Switch and Rubber Key with Backlight 4 Sets SAVE / RECALL panel setting User Friendly Operation, Coarse and Fine Voltage Control Warning Buzzer Output On / Off Switch USB Device for Remote Control (Baud Rate 115200 bps Maximum) Free downloadable PC software Smart Cooling Fan with Low Noise Safety Design: Reverse Polarity, Overload Protection
Content
Weight315152215
Dimensions8 × 10 × 6 in18 × 12 × 10 in18 × 12 × 10 in4 × 6 × 2 in4 × 6 × 2 in18 × 12 × 10 in
Additional information
Weight 3 lbs
Dimensions 8 × 10 × 6 in
Weight 15 lbs
Dimensions 18 × 12 × 10 in
Weight 15 lbs
Dimensions 18 × 12 × 10 in
Weight 2 lbs
Dimensions 4 × 6 × 2 in
Weight 2 lbs
Dimensions 4 × 6 × 2 in
Weight 15 lbs
Dimensions 18 × 12 × 10 in