Wire Mapper Pro Model CA7028 (LAN Cable Tester)
Available for Quote
The Wire Mapper Pro Model CA7028 is a hand-held structured cable mapping and troubleshooting tester designed for use on UTP, STP, FTP, and SSTP cabling equipped with RJ-45 connectors and wired to either TIA568A/B ISO11801 and EN 50137, USOC or ISDN specifications. It detects open circuit pairs, shorts, crossed wires, crossed pairs, reversed pairs, split pairs and shield faults. The Model CA7028 also has the ability to identify telephone and data lines. If the main unit is plugged into an operational RJ-45 socket, it will give a continuous warning tone and display if a telephone voltage is present on any of the pins. If the Service Detect key is pressed, it will check and display telephone, 10BaseT, 100Mbit+ and token ring active service.
Quick Comparison
| Settings | Wire Mapper Pro Model CA7028 (LAN Cable Tester) remove | Clamp-on Meter Model 514 (AC/DC, TRMS, 1000AAC/DC, 750VAC/1000VDC, Hz, Ohms, Continuity) remove | Power Clamp-on Meter Model 607 (TRMS, 1000VAC/DC, 2000AAC/3000ADC, Ohms, Continuity, Energy, Harmonics, Power, THD, Recording ) remove | Calibration of AEMC 6416 Ground Resistance Tester NIST Calibration with Certificate remove | Digital FlexProbe Model 400D-10 w/6' Lead (TRMS, 4AAC, 40AAC, 400AAC) remove | Clamp-on Meter Model 603 (TRMS, 1000VAC/DC, 2000AAC/3000ADC, Ohms, Continuity, Temperature) remove | ||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Image | |  |  |  |  |  | ||||||||||||||||||||||||
| SKU | N_AEMC CA7028 | N_AEMC 514 | N_AEMC 607 | C_AEMC 6416 | N_AEMC 400D-10 | N_AEMC 603 | ||||||||||||||||||||||||
| Rating | ||||||||||||||||||||||||||||||
| Price | Available for Quote | Available for Quote | Available for Quote | Available for Quote | Available for Quote | Available for Quote | ||||||||||||||||||||||||
| Stock | ||||||||||||||||||||||||||||||
| Availability | ||||||||||||||||||||||||||||||
| Add to cart | ||||||||||||||||||||||||||||||
| Description | The Wire Mapper Pro Model CA7028 is a hand-held structured cable mapping and troubleshooting tester designed for use on UTP, STP, FTP, and SSTP cabling equipped with RJ-45 connectors and wired to either TIA568A/B ISO11801 and EN 50137, USOC or ISDN specifications. It detects open circuit pairs, shorts, crossed wires, crossed pairs, reversed pairs, split pairs and shield faults. The Model CA7028 also has the ability to identify telephone and data lines. If the main unit is plugged into an operational RJ-45 socket, it will give a continuous warning tone and display if a telephone voltage is present on any of the pins. If the Service Detect key is pressed, it will check and display telephone, 10BaseT, 100Mbit+ and token ring active service. | The Clamp-on Meter Model 514 is a general purpose professional instrument that measures up to the toughest standards. It is built into a rugged mechanical case and is designed using quality polycarbonate materials. This meter offers a complete set of measurement ranges and is in compliance with international safety and quality standards to ensure a professional and reliable measuring tool. The Model 514 is auto-ranging and provides the best measurement range and resolution for troubleshooting. It has a high resolution 40A range. The Model 514 measures AC and DC current, AC and DC voltage, resistance, continuity with beeper, and frequency from V or A. It also features a diode test function. The Model 514 also uses Hall sensor technology that provides both DC and AC current measurements to 1000A. The Model 514 is sized for comfortable, one-handed operation. This model is True RMS sensing responding to distorted signal electrical systems. The jaw openingis 1.575" (40mm). | All equipment calibrations do not include any equipment warranty. Equipment that has any visible sign of damage will be documented and the customer will be notified before any services are performed. Any needed repairs will be quoted separately. All of our items will ship with Warranty Void tamper resistant seals. If these seals have been removed or tampered with, the Calibration will be void. | |||||||||||||||||||||||||||
| Content | ||||||||||||||||||||||||||||||
| Weight | 9 | 9 | 9 | 3 | 6 | 9 | ||||||||||||||||||||||||
| Dimensions | 5 × 5 × 5 in | 6 × 6 × 12 in | 6 × 6 × 12 in | 6 × 10 × 4 in | 6 × 6 × 12 in | 6 × 6 × 12 in | ||||||||||||||||||||||||
| Additional information |
|
|
|
|
|
|
