In Stock

Wire Mapper Pro Model CA7028 (LAN Cable Tester)

Available for Quote

The Wire Mapper Pro Model CA7028 is a hand-held structured cable mapping and troubleshooting tester designed for use on UTP, STP, FTP, and SSTP cabling equipped with RJ-45 connectors and wired to either TIA568A/B ISO11801 and EN 50137, USOC or ISDN specifications. It detects open circuit pairs, shorts, crossed wires, crossed pairs, reversed pairs, split pairs and shield faults. The Model CA7028 also has the ability to identify telephone and data lines. If the main unit is plugged into an operational RJ-45 socket, it will give a continuous warning tone and display if a telephone voltage is present on any of the pins. If the Service Detect key is pressed, it will check and display telephone, 10BaseT, 100Mbit+ and token ring active service.

View List
SKU: N_AEMC CA7028 Category: Tag:

Quick Comparison

SettingsWire Mapper Pro Model CA7028 (LAN Cable Tester) removeCalibration of AEMC 6418 Ground Resistance Tester NIST Calibration with Certificate removeClamp-on Leakage Current Meter Model 566 removeClamp-on Meter Model CM605 (100AAC/DC, Low Current) removeAEMC 6416 Ground Resistance Tester removeAEMC 6420 Micro-Ohmmeter, 10-Amp, 1µ Ohms to 400 Ohms remove
Image
SKUN_AEMC CA7028C_AEMC 6418N_AEMC 566N_AEMC CM605N_AEMC 6416N_AEMC 6240
Rating
PriceAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for Quote
Stock
Availability
Add to cart

Add to Cart

Instant Quote

Add to Cart

Add to Cart

Add to Cart

Add to Cart

DescriptionThe Wire Mapper Pro Model CA7028 is a hand-held structured cable mapping and troubleshooting tester designed for use on UTP, STP, FTP, and SSTP cabling equipped with RJ-45 connectors and wired to either TIA568A/B ISO11801 and EN 50137, USOC or ISDN specifications. It detects open circuit pairs, shorts, crossed wires, crossed pairs, reversed pairs, split pairs and shield faults. The Model CA7028 also has the ability to identify telephone and data lines. If the main unit is plugged into an operational RJ-45 socket, it will give a continuous warning tone and display if a telephone voltage is present on any of the pins. If the Service Detect key is pressed, it will check and display telephone, 10BaseT, 100Mbit+ and token ring active service.All equipment calibrations do not include any equipment warranty. Equipment that has any visible sign of damage will be documented and the customer will be notified before any services are performed. Any needed repairs will be quoted separately. All of our items will ship with Warranty Void tamper resistant seals. If these seals have been removed or tampered with, the Calibration will be void.The Model CM605 is a versatile device that is capable of measuring both AC/DC voltage (up to 600V) and AC/DC current up to 100 Amps. It can also measure resistance up to 10k? and includes a continuity buzzer to assist in circuit verification. The Multifunction Clamp-on Meter Model CM605 is a good choice for both process and general industrial applications. It can detect milliamp process signals, as well as the higher currents up to 100A associated with general industrial monitoring and troubleshooting. For operator convenience, the Model CM605 can also hold the last reading in the display and capture the peak value at the time of the measurement.
ContentThe Ground Resistance Tester Model 6416 measures ground rod and grid resistance and impedance without the use of auxiliary rods. Clamp-on ground resistance testers can be used in multi-grounded systems without disconnecting or de-energizing the ground system under test. The Model 6416 simply clamps around the grounding electrode or conductor and measures the resistance to ground. By performing measurements on intact ground systems, the user also verifies the quality of the grounding connections and bonds. Resistance and continuity of grounding loops around pads and buildings may also be measured.
Weight93993.510
Dimensions5 × 5 × 5 in6 × 10 × 4 in6 × 6 × 12 in6 × 6 × 12 in12 × 5 × 5 in12 × 12 × 10 in
Additional information
Weight 9 lbs
Dimensions 5 × 5 × 5 in
Weight 3 lbs
Dimensions 6 × 10 × 4 in
Weight 9 lbs
Dimensions 6 × 6 × 12 in
Weight 9 lbs
Dimensions 6 × 6 × 12 in
Weight 3.5 lbs
Dimensions 12 × 5 × 5 in
Weight 10 lbs
Dimensions 12 × 12 × 10 in