| Description | The Phase Rotation Meter Model 6610 is an essential tool for any installation, inspection and maintenance facility. The Model 6610 is a phase meter with voltage sensing detector clips (no metal contact points) designed to identify phase rotation on 3-phase systems and identify live and open/de-energized phases. The phase order is determined as soon as the leads are connected. The presence of live wires and phase sequence are provided by LED indication and buzzer as soon as detection has occurred. The Model 6610 is ideal for installing rotating machinery or motors, and for checking generator phase rotation direction. | | | | The Model CM605 is a versatile device that is capable of measuring both AC/DC voltage (up to 600V) and AC/DC current up to 100 Amps. It can also measure resistance up to 10k? and includes a continuity buzzer to assist in circuit verification. The Multifunction Clamp-on Meter Model CM605 is a good choice for both process and general industrial applications. It can detect milliamp process signals, as well as the higher currents up to 100A associated with general industrial monitoring and troubleshooting. For operator convenience, the Model CM605 can also hold the last reading in the display and capture the peak value at the time of the measurement. | The Clamp-on Meter Model 512 is a general purpose professional instrument that measures up to the toughest standards. It is built into a rugged mechanical case and is designed using quality polycarbonate materials. This meter offers a complete set of measurement ranges and is in compliance with international safety and quality standards to ensure a professional and reliable measuring tool. The Model 512 is auto-ranging and provides the best measurement range and resolution for troubleshooting. It has a high resolution 40A range. The Model 512 measures AC current, AC and DC voltage, resistance, continuity with beeper, and frequency from V or A. It also features a diode test function. The Model 512 is sized for comfortable, one-handed operation. This model is a True RMS clamp-on that provides RMS measurements for today's non-linear electrical environments. |
| Content | | | | The Ground Resistance Tester Model 6418 measures ground rod, busbar, and grid resistance and impedance without the use of auxiliary rods. Clamp-on ground resistance testers can be used in multi-grounded systems without disconnecting or de-energizing the ground system under test. The Model 6418 simply clamps around the grounding electrode or conductor and measures the resistance to ground. By performing measurements on intact ground systems, the user also verifies the quality of the grounding connections and bonds. Resistance and continuity of grounding loops around pads and buildings may also be measured. | | |
| Additional information |
| Weight |
6 lbs |
| Dimensions |
5 × 5 × 5 in |
|
| Weight |
6 lbs |
| Dimensions |
6 × 6 × 12 in |
|
| Weight |
9 lbs |
| Dimensions |
6 × 6 × 12 in |
|
| Weight |
3.5 lbs |
| Dimensions |
12 × 5 × 5 in |
|
| Weight |
9 lbs |
| Dimensions |
6 × 6 × 12 in |
|
| Weight |
9 lbs |
| Dimensions |
6 × 6 × 12 in |
|
