In Stock

AC Line Splitter Model ALS-1

$17.00

The AC Line Splitter Model ALS-1 increases the sensitivity of clamp-on current probes and clamp-on meters. The Model ALS-1 provides temporary separation of conductors (avoiding splitting of the line) to facilitate measurement of current. Simply plug the Model ALS-1 into a connector for a safe measurement. Two clamp positions are available: X1 for direct readings, and X10 for actual reading multiplied by 10. Also features voltage checking.

View List
SKU: N_AEMC ALS-1 Category: Tag:

Quick Comparison

SettingsAC Line Splitter Model ALS-1 removePower Clamp-on Meter Model 405 (TRMS, 1000VAC/DC, 1000AAC/1500ADC, Ohms, Continuity, Phase Rotation, Power, THD) removeAEMC 6527 4G Ohm, 250V/500V/1000V Digital Megohmmeter removeClamp-on Meter Model 675 (Dual Display, TRMS, AC/DC Amps & Volts, Ohms, Continuity, Frequency & Temperature) removeAEMC 6416 Ground Resistance Tester removeCalibration of AEMC 6250 Micro-Ohmmeter NIST Calibration with Certificate remove
Image
SKUN_AEMC ALS-1N_AEMC 405N_AEMC 6527N_AEMC 675N_AEMC 6416C_AEMC 6250
Rating
Price$17.00$359.00$279.00$299.00$1,405.00Sign-in for Instant Quote
Stock
Availability
Add to cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Instant Quote

DescriptionThe AC Line Splitter Model ALS-1 increases the sensitivity of clamp-on current probes and clamp-on meters. The Model ALS-1 provides temporary separation of conductors (avoiding splitting of the line) to facilitate measurement of current. Simply plug the Model ALS-1 into a connector for a safe measurement. Two clamp positions are available: X1 for direct readings, and X10 for actual reading multiplied by 10. Also features voltage checking.Clamp-on Meter Model 675 is a general purpose professional instrument that measures up to the toughest standards. This meter offers a complete set of measurement ranges, AC and DC current, AC and DC voltage, resistance, continuity with beeper, frequency from V or A, and temperature. It is in compliance with international safety and quality standards to ensure professional and reliable measuring tools. This meter is designed to measure and display amps and volts at the same time. It also is auto-ranging and provides the best measurement range and resolution for troubleshooting.All equipment calibrations do not include any equipment warranty. Equipment that has any visible sign of damage will be documented and the customer will be notified before any services are performed. Any needed repairs will be quoted separately. All of our items will ship with Warranty Void tamper resistant seals. If these seals have been removed or tampered with, the Calibration will be void.
ContentThe Ground Resistance Tester Model 6416 measures ground rod and grid resistance and impedance without the use of auxiliary rods. Clamp-on ground resistance testers can be used in multi-grounded systems without disconnecting or de-energizing the ground system under test. The Model 6416 simply clamps around the grounding electrode or conductor and measures the resistance to ground. By performing measurements on intact ground systems, the user also verifies the quality of the grounding connections and bonds. Resistance and continuity of grounding loops around pads and buildings may also be measured.
Weight29293.58
Dimensions5 × 5 × 5 in6 × 6 × 12 in10 × 5 × 5 in6 × 6 × 12 in12 × 5 × 5 in10 × 8 × 12 in
Additional information
Weight 2 lbs
Dimensions 5 × 5 × 5 in
Weight 9 lbs
Dimensions 6 × 6 × 12 in
Weight 2 lbs
Dimensions 10 × 5 × 5 in
Weight 9 lbs
Dimensions 6 × 6 × 12 in
Weight 3.5 lbs
Dimensions 12 × 5 × 5 in
Weight 8 lbs
Dimensions 10 × 8 × 12 in