| Description | The Model 5217 is a portable hand-held multimeter that measures a variety of electrical and physical quantities including voltage (AC and DC), resistance, capacitance, frequency and temperature. These instruments can also perform continuity checks, voltage detection and diode testing (including forward bias voltage). Measurement features include Auto Range mode, which enables the instrument to select the best range for the input detected, and a Data HOLD function. These instruments are rugged and simple to use and rated to 600V CAT III. | | The Model CM605 is a versatile device that is capable of measuring both AC/DC voltage (up to 600V) and AC/DC current up to 100 Amps. It can also measure resistance up to 10k? and includes a continuity buzzer to assist in circuit verification. The Multifunction Clamp-on Meter Model CM605 is a good choice for both process and general industrial applications. It can detect milliamp process signals, as well as the higher currents up to 100A associated with general industrial monitoring and troubleshooting. For operator convenience, the Model CM605 can also hold the last reading in the display and capture the peak value at the time of the measurement. | | | |
| Content | | | | The Ground Resistance Tester Model 6416 measures ground rod and grid resistance and impedance without the use of auxiliary rods. Clamp-on ground resistance testers can be used in multi-grounded systems without disconnecting or de-energizing the ground system under test. The Model 6416 simply clamps around the grounding electrode or conductor and measures the resistance to ground. By performing measurements on intact ground systems, the user also verifies the quality of the grounding connections and bonds. Resistance and continuity of grounding loops around pads and buildings may also be measured. | | The Ground Resistance Tester Model 6418 measures ground rod, busbar, and grid resistance and impedance without the use of auxiliary rods. Clamp-on ground resistance testers can be used in multi-grounded systems without disconnecting or de-energizing the ground system under test. The Model 6418 simply clamps around the grounding electrode or conductor and measures the resistance to ground. By performing measurements on intact ground systems, the user also verifies the quality of the grounding connections and bonds. Resistance and continuity of grounding loops around pads and buildings may also be measured. |
| Additional information |
| Weight |
6 lbs |
| Dimensions |
7 × 7 × 7 in |
|
| Weight |
2 lbs |
| Dimensions |
10 × 5 × 5 in |
|
| Weight |
9 lbs |
| Dimensions |
6 × 6 × 12 in |
|
| Weight |
3.5 lbs |
| Dimensions |
12 × 5 × 5 in |
|
| Weight |
9 lbs |
| Dimensions |
6 × 6 × 12 in |
|
| Weight |
3.5 lbs |
| Dimensions |
12 × 5 × 5 in |
|
