In Stock

AC Line Splitter Model ALS-1

Available for Quote

The AC Line Splitter Model ALS-1 increases the sensitivity of clamp-on current probes and clamp-on meters. The Model ALS-1 provides temporary separation of conductors (avoiding splitting of the line) to facilitate measurement of current. Simply plug the Model ALS-1 into a connector for a safe measurement. Two clamp positions are available: X1 for direct readings, and X10 for actual reading multiplied by 10. Also features voltage checking.

View List
SKU: N_AEMC ALS-1 Category: Tag:

Quick Comparison

SettingsAC Line Splitter Model ALS-1 removeDigital FlexProbe Model 400D-10 w/6' Lead (TRMS, 4AAC, 40AAC, 400AAC) removeAEMC 6418 Ground Resistance Tester removeClamp-on Leakage Current Meter Model 566 removeClamp-on Meter Model 403 (TRMS, 1000VAC/DC, 1000AAC/1500ADC, Ohms, Continuity, Temperature) removeClamp-on Meter Model CM605 (100AAC/DC, Low Current) remove
Image
SKUN_AEMC ALS-1N_AEMC 400D-10N_AEMC 6418N_AEMC 566N_AEMC 403N_AEMC CM605
Rating
PriceAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for Quote
Stock
Availability
Add to cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

DescriptionThe AC Line Splitter Model ALS-1 increases the sensitivity of clamp-on current probes and clamp-on meters. The Model ALS-1 provides temporary separation of conductors (avoiding splitting of the line) to facilitate measurement of current. Simply plug the Model ALS-1 into a connector for a safe measurement. Two clamp positions are available: X1 for direct readings, and X10 for actual reading multiplied by 10. Also features voltage checking.The Model CM605 is a versatile device that is capable of measuring both AC/DC voltage (up to 600V) and AC/DC current up to 100 Amps. It can also measure resistance up to 10k? and includes a continuity buzzer to assist in circuit verification. The Multifunction Clamp-on Meter Model CM605 is a good choice for both process and general industrial applications. It can detect milliamp process signals, as well as the higher currents up to 100A associated with general industrial monitoring and troubleshooting. For operator convenience, the Model CM605 can also hold the last reading in the display and capture the peak value at the time of the measurement.
ContentThe Ground Resistance Tester Model 6418 measures ground rod, busbar, and grid resistance and impedance without the use of auxiliary rods. Clamp-on ground resistance testers can be used in multi-grounded systems without disconnecting or de-energizing the ground system under test. The Model 6418 simply clamps around the grounding electrode or conductor and measures the resistance to ground. By performing measurements on intact ground systems, the user also verifies the quality of the grounding connections and bonds. Resistance and continuity of grounding loops around pads and buildings may also be measured.
Weight263.5999
Dimensions5 × 5 × 5 in6 × 6 × 12 in12 × 5 × 5 in6 × 6 × 12 in6 × 6 × 12 in6 × 6 × 12 in
Additional information
Weight 2 lbs
Dimensions 5 × 5 × 5 in
Weight 6 lbs
Dimensions 6 × 6 × 12 in
Weight 3.5 lbs
Dimensions 12 × 5 × 5 in
Weight 9 lbs
Dimensions 6 × 6 × 12 in
Weight 9 lbs
Dimensions 6 × 6 × 12 in
Weight 9 lbs
Dimensions 6 × 6 × 12 in