In Stock

Rigol DSA815-TG 9kHz to 1.5GHz with Pre-Amplifier and Tracking Generator Spectrum Analyzer

Available for Quote

  • 2012-2014 top selling unit
  • 9 kHz to 1.5 GHz Frequency Range
  • Typical -135 dBm Displayed Average Noise Level (DANL)
  • -80 dBc/Hz @10 kHz offset Phase Noise
  • Total Amplitude Uncertainty <1.5 dB
  • 10 Hz Minimum Resolution Bandwidth (RBW) (As of 4/1/2017 – Previously 100 Hz)
  • Standard with Preamplifier and AM/FM Demodulation Function
  • 1.5 GHz Tracking Generator
  • 8 inch (800×480 pixels) high-definition display with clear,  vivid, and easy to use graphical interface
  • Complete connectivity with standard interfaces such as LAN, USB Host, USB Device and GPIB (optional)
  • Compact size, light weight 4.25kg (9.4lbs)
View List
SKU: N_Rigol DSA815-TG Category: Tag:

Quick Comparison

SettingsRigol DSA815-TG 9kHz to 1.5GHz with Pre-Amplifier and Tracking Generator Spectrum Analyzer removeInstek GSP-9300B with Opt. 03 GPIB Interface for GSP-9300 (factory install only) removeGW Instek GTL-302 N-Type RF Cable Assembly for GSP Series Spectrum Analyzer removeGW Instek RLB-001 N-Type Return Loss Bridge for GSP Series Spectrum Analyzer removeInstek GSP-9300B 9 kHz - 3 GHz Spectrum Analyzer with Built-in Preamp removeGW Instek GTL-401 DC Power Cord for GSP Series Spectrum Analyzer remove
Image
SKUN_Rigol DSA815-TGN_GW Instek GSP-9300B opt 03N_GW Instek GTL-302N_GW Instek RLB-001N_GW Instek GSP-9300BN_GW Instek GTL-401
Rating
PriceAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for Quote
Stock
Availability
Add to cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Description
  • 2012-2014 top selling unit
  • 9 kHz to 1.5 GHz Frequency Range
  • Typical -135 dBm Displayed Average Noise Level (DANL)
  • -80 dBc/Hz @10 kHz offset Phase Noise
  • Total Amplitude Uncertainty <1.5 dB
  • 10 Hz Minimum Resolution Bandwidth (RBW) (As of 4/1/2017 - Previously 100 Hz)
  • Standard with Preamplifier and AM/FM Demodulation Function
  • 1.5 GHz Tracking Generator
  • 8 inch (800×480 pixels) high-definition display with clear,  vivid, and easy to use graphical interface
  • Complete connectivity with standard interfaces such as LAN, USB Host, USB Device and GPIB (optional)
  • Compact size, light weight 4.25kg (9.4lbs)
GSP-9300B is a 3GHz spectrum analyzer to meet basic RF measurement requirements. It provides the frequency stability of 0.025ppm; the aging rate of 1ppm/year; a built-in preamplifier; the base noise of -149dBm/Hz, and more than 20 measurement applications, including AM/FM modulation signal analysis, signal channel analysis, and CATV parameter test. While collocating with TG option, GSP-9300B can conduct frequency response or power linearity tests for components.Return Loss Bridge [GSP-Series]. Impedance : 50 ohms, N-Type Connector, Source/Load:Female, Couple:Male. 1GHz Return Loss Bridge Compatible with GSP-SeriesGSP-9300B is a 3GHz spectrum analyzer to meet basic RF measurement requirements. It provides the frequency stability of 0.025ppm; the aging rate of 1ppm/year; a built-in preamplifier; the base noise of -149dBm/Hz, and more than 20 measurement applications, including AM/FM modulation signal analysis, signal channel analysis, and CATV parameter test. While collocating with TG option, GSP-9300B can conduct frequency response or power linearity tests for components.
Content
Weight151022102
Dimensions16 × 8 × 8 in14 × 8 × 10 in9 × 7 × 1 in4 × 4 × 4 in14 × 8 × 10 in9 × 7 × 1 in
Additional information
Weight 15 lbs
Dimensions 16 × 8 × 8 in
Weight 10 lbs
Dimensions 14 × 8 × 10 in
Weight 2 lbs
Dimensions 9 × 7 × 1 in
Weight 2 lbs
Dimensions 4 × 4 × 4 in
Weight 10 lbs
Dimensions 14 × 8 × 10 in
Weight 2 lbs
Dimensions 9 × 7 × 1 in