Instek GLN-5040A Line Impedance Stabilization Networ – Line Impedance Stabilization Network [LISN] for GSP-9330 spectrum analyzer
Available for Quote
The GLN – 5040A Two Line V – Network is used for EMI testing. It provides stable impedance for the EUT terminals and the reference ground within the conducted emissions range. The GLN – 5040A also isolates the unwanted network signals from the power supply unit and only couples the disturbance voltage of the measured device to the receiver. The product’s performance is in compliance with the standard requirements of CISPR16 – 1 – 2 for V – networks with a simulated impedance of 50? H + 5 ?) || 50 ? in the frequency range of 9kHz to 30MHz. It uses standard BNC output connector with 50 ? output impedance to match any measurement devices such as receivers and spectrum analyzers.
Quick Comparison
| Settings | Instek GLN-5040A Line Impedance Stabilization Networ - Line Impedance Stabilization Network [LISN] for GSP-9330 spectrum analyzer remove | Instek PSU-03B Bus Bar for 4 units in parallel operation remove | GW Instek GPR-1820HD Series GPR-H Single Output Linear DC Power Supply with LED Display, 0-18V 0-20A, 360W remove | GW Instek GPR-0830HD Series GPR-H Single Output Linear DC Power Supply with LED Display, 30 Output Amps, 8 Output Volts, 240 Output Watts remove | Instek GPS-4303 200W Quadruple-Output Linear DC Power Supply, 30V DC, 3 Amp remove | GW Instek GPR-11H30D Single Output Linear DC Power Supply with LED Display, 0-110V 0-3A Power Supply remove | ||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Image | |  |  |  |  |  | ||||||||||||||||||||||||
| SKU | N_GW Instek GLN-5040A | N_GW Instek PSU-03B | N_GW Instek GPR-1820HD | N_GW Instek GPR-0830HD | N_GW Instek GPS-4303 | N_GW Instek GPR-11H30D | ||||||||||||||||||||||||
| Rating | ||||||||||||||||||||||||||||||
| Price | Available for Quote | Available for Quote | Available for Quote | Available for Quote | Available for Quote | Available for Quote | ||||||||||||||||||||||||
| Stock | ||||||||||||||||||||||||||||||
| Availability | ||||||||||||||||||||||||||||||
| Add to cart | ||||||||||||||||||||||||||||||
| Description | The GLN - 5040A Two Line V - Network is used for EMI testing. It provides stable impedance for the EUT terminals and the reference ground within the conducted emissions range. The GLN - 5040A also isolates the unwanted network signals from the power supply unit and only couples the disturbance voltage of the measured device to the receiver. The product's performance is in compliance with the standard requirements of CISPR16 - 1 - 2 for V - networks with a simulated impedance of 50? H + 5 ?) || 50 ? in the frequency range of 9kHz to 30MHz. It uses standard BNC output connector with 50 ? output impedance to match any measurement devices such as receivers and spectrum analyzers. | 360W DC Linear Power Supply 0-18V, 0-20A 0-18V, 0-20A 0.01% High Regulation Constant Voltage and Constant Current Operation Internal Select for Continuous or Dynamic Load Low Ripple and Noise Overload and Reverse Polarity Protection 3 1/2 Digit 0.5" LED Display | 240W DC Linear Power Supply 0-8V, 0-30A 0-8V, 0-30A 0.01% High Regulation Constant Voltage and Constant Current Operation Internal Select for Continuous or Dynamic Load Low Ripple and Noise Overload and Reverse Polarity Protection 3 1/2 Digit 0.5" LED Display | 330W DC Linear Power Supply 0-110V, 0-3A 0-110V, 0-3A 0.01% High Regulation Constant Voltage and Constant Current Operation Internal Select for Continuous or Dynamic Load Low Ripple and Noise Overload and Reverse Polarity Protection 3 1/2 Digit 0.5" LED Display | ||||||||||||||||||||||||||
| Content | ||||||||||||||||||||||||||||||
| Weight | 12 | 2 | 15 | 15 | 15 | 15 | ||||||||||||||||||||||||
| Dimensions | 23 × 18 × 11 in | 4 × 6 × 2 in | 18 × 12 × 10 in | 18 × 12 × 10 in | 18 × 12 × 10 in | 18 × 12 × 10 in | ||||||||||||||||||||||||
| Additional information |
|
|
|
|
|
|
