| Description | The GLN - 5040A Two Line V - Network is used for EMI testing. It provides stable impedance for the EUT terminals and the reference ground within the conducted emissions range. The GLN - 5040A also isolates the unwanted network signals from the power supply unit and only couples the disturbance voltage of the measured device to the receiver. The product's performance is in compliance with the standard requirements of CISPR16 - 1 - 2 for V - networks with a simulated impedance of 50? H + 5 ?) || 50 ? in the frequency range of 9kHz to 30MHz. It uses standard BNC output connector with 50 ? output impedance to match any measurement devices such as receivers and spectrum analyzers. | 90W DC Linear Power Supply 0-18V, 0-5A DIGITAL
0-5A DIGITAL
Light and Compact Design
0.01% High Regulation
Constant Voltage and Constant Current Operation
Remote Control for External Programmability
Internal Select for Continuous or Dynamic Load
Low Ripple and Noise
Overload and Reverse Polarity Protection
Series or Parallel Operation | 360W DC Linear Power Supply 0-18V, 0-20A
0-18V, 0-20A
0.01% High Regulation
Constant Voltage and Constant Current Operation
Internal Select for Continuous or Dynamic Load
Low Ripple and Noise
Overload and Reverse Polarity Protection
3 1/2 Digit 0.5" LED Display | 0-30Vx2,0-3Ax2; 2.5V/3.3V/5V,3A, USB; 2 3/4 digit
Three Independent Output : 30V/3A x 2, 2.5V/3.3V/5V/3A x 1
4 LED Display Sets : 3 Digits After Decimal Point
Minimum Resolution : 100mV/10mA
Digital Panel Control (Rotary Encoder Switch, Rubber Key With Indicator)
Key-Lock
User-Friendly Operation, Coarse/Fine Voltage Control
4 Panel Settings Save/Recall (Plus Factory Settings Recall)
Output ON/OFF
Tracking Series and Parallel Mode
USB Device for Remote Control (Baud Rate 115200 bps Maximum)
Free downloadable PC software
Smart Cooling Fan Achieving Low Noise
Warning Buzzer
Light-Weight and Compact Design | SFG-1000 Series, an economic function generator with high accuracy and high stability output, is designed based on the DDS (Direct Digital Synthesis) technology embedded in a large scale FPGA. The frequency range of 3MHz and the output waveform selection as Sine, Square, Triangle and TTL of SFG-1000 Series adequately provide the fundamental features to ensure high confidence for the test results. The DDS technology at an affordable price gives a high-value solution to the users who need a signal source for accurate but unsophisticated measurement applications. | Hybrid Linear, Low noise, 0-36V/0-10A, 360W
- Output Voltage Rating： 36V
- Output Power： 360W
- Low Ripple and Noise (0.5mVrms/ 10mArms)
- Fast transition recovery time (100us)
- Maximum 2 units in series connections or 3 units in parallel connections
- Select the setting digits for voltage and current (coarse/ fine volume control)
- Panel Lock Function
- 3 set of preset function
- Output off timer function (Range: 1min to 1000hours & 59mins)
- CC priority function (prevent overshoot & inrush current)
- Sequence function of PC editing (Max.: 1000 steps/ Min. step period: 50ms)
- Protection: OVP, UVP, OCP, remote sensing (Terminal open)
- External Analog Control Function
- PC Remote Interface (Standard)： RS-232; (Optional)： GPIB / USB / LAN
- CE Compliance
|
| Additional information |
| Weight |
12 lbs |
| Dimensions |
23 × 18 × 11 in |
|
| Weight |
15 lbs |
| Dimensions |
18 × 12 × 10 in |
|
| Weight |
15 lbs |
| Dimensions |
18 × 12 × 10 in |
|
| Weight |
15 lbs |
| Dimensions |
18 × 12 × 10 in |
|
| Weight |
6 lbs |
| Dimensions |
15 × 12 × 6 in |
|
| Weight |
15 lbs |
| Dimensions |
18 × 12 × 10 in |
|
