In Stock

Instek GLN-5040A Line Impedance Stabilization Networ – Line Impedance Stabilization Network [LISN] for GSP-9330 spectrum analyzer

Available for Quote

The GLN – 5040A Two Line V – Network is used for EMI testing. It provides stable impedance for the EUT terminals and the reference ground within the conducted emissions range. The GLN – 5040A also isolates the unwanted network signals from the power supply unit and only couples the disturbance voltage of the measured device to the receiver. The product’s performance is in compliance with the standard requirements of CISPR16 – 1 – 2 for V – networks with a simulated impedance of 50? H + 5 ?) || 50 ? in the frequency range of 9kHz to 30MHz. It uses standard BNC output connector with 50 ? output impedance to match any measurement devices such as receivers and spectrum analyzers.

View List
SKU: N_GW Instek GLN-5040A Category: Tag:

Quick Comparison

SettingsInstek GLN-5040A Line Impedance Stabilization Networ - Line Impedance Stabilization Network [LISN] for GSP-9330 spectrum analyzer removeGW Instek GPR-11H30D Single Output Linear DC Power Supply with LED Display, 0-110V 0-3A Power Supply removeGW Instek GPR-1820HD Series GPR-H Single Output Linear DC Power Supply with LED Display, 0-18V 0-20A, 360W removeGW Instek GPE-2323 GPE-X323 Multi-Output DC Power Supply, 2 Channel, 192W, 0-32 VDC, 0-3A, Series/Parallel removeGW Instek PLR 20-18 DC Power Supply, 20V, 18A, 360W Low Noise removeInstek PLR 36-10 DC Power Supply, 36V, 10A, 360W Low Noise remove
Image
SKUN_GW Instek GLN-5040AN_GW Instek GPR-11H30DN_GW Instek GPR-1820HDN_GW Instek GPE-2323N_GW Instek PLR 20-18N_GW Instek PLR 36-10
Rating
PriceAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for Quote
Stock
Availability
Add to cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

DescriptionThe GLN - 5040A Two Line V - Network is used for EMI testing. It provides stable impedance for the EUT terminals and the reference ground within the conducted emissions range. The GLN - 5040A also isolates the unwanted network signals from the power supply unit and only couples the disturbance voltage of the measured device to the receiver. The product's performance is in compliance with the standard requirements of CISPR16 - 1 - 2 for V - networks with a simulated impedance of 50? H + 5 ?) || 50 ? in the frequency range of 9kHz to 30MHz. It uses standard BNC output connector with 50 ? output impedance to match any measurement devices such as receivers and spectrum analyzers.330W DC Linear Power Supply 0-110V, 0-3A 0-110V, 0-3A 0.01% High Regulation Constant Voltage and Constant Current Operation Internal Select for Continuous or Dynamic Load Low Ripple and Noise Overload and Reverse Polarity Protection 3 1/2 Digit 0.5" LED Display360W DC Linear Power Supply 0-18V, 0-20A 0-18V, 0-20A 0.01% High Regulation Constant Voltage and Constant Current Operation Internal Select for Continuous or Dynamic Load Low Ripple and Noise Overload and Reverse Polarity Protection 3 1/2 Digit 0.5" LED Display192W Two Channel DC Power Supply GPE-2323 2 Channels, 192W Linear DC Power Supply 2 Independent Isolated Output 10mv min resolution 1ma min resolution 4.3 Inch LCD Display Setting & Read back Resolution 10mA / 1mA Output ON/OFF Analog Control (Remote I/O) for Output ON / OFF Set View function for checking an original V / I setting during output on Key Lock Function Tracking series and parallel operation Smart cooling fan achieving low noise Optional European Jack Type Terminal

Hybrid Linear, Low noise, 0-20V/0-18A, 360W

  • Output Voltage Rating: 20V
  • Output Power: 360W
  • Low Ripple and Noise (0.5mVrms/ 10mArms)
  • Fast transition recovery time (100us)
  • Maximum 2 units in series connections or 3 units in parallel connections
  • Select the setting digits for voltage and current (coarse/ fine volume control)
  • Panel Lock Function
  • 3 set of preset function
  • Output off timer function (Range: 1min to 1000hours & 59mins)
  • CC priority function (prevent overshoot & inrush current)
  • Sequence function of PC editing (Max.: 1000 steps/ Min. step period: 50ms)
  • Protection: OVP, UVP, OCP, remote sensing (Terminal open)
  • External Analog Control Function
  • PC Remote Interface (Standard): RS-232; (Optional): GPIB / USB / LAN
  • CE Compliance

Hybrid Linear, Low noise, 0-36V/0-10A, 360W

  • Output Voltage Rating: 36V
  • Output Power: 360W
  • Low Ripple and Noise (0.5mVrms/ 10mArms)
  • Fast transition recovery time (100us)
  • Maximum 2 units in series connections or 3 units in parallel connections
  • Select the setting digits for voltage and current (coarse/ fine volume control)
  • Panel Lock Function
  • 3 set of preset function
  • Output off timer function (Range: 1min to 1000hours & 59mins)
  • CC priority function (prevent overshoot & inrush current)
  • Sequence function of PC editing (Max.: 1000 steps/ Min. step period: 50ms)
  • Protection: OVP, UVP, OCP, remote sensing (Terminal open)
  • External Analog Control Function
  • PC Remote Interface (Standard): RS-232; (Optional): GPIB / USB / LAN
  • CE Compliance
Content
Weight121515151515
Dimensions23 × 18 × 11 in18 × 12 × 10 in18 × 12 × 10 in18 × 12 × 10 in18 × 12 × 10 in18 × 12 × 10 in
Additional information
Weight 12 lbs
Dimensions 23 × 18 × 11 in
Weight 15 lbs
Dimensions 18 × 12 × 10 in
Weight 15 lbs
Dimensions 18 × 12 × 10 in
Weight 15 lbs
Dimensions 18 × 12 × 10 in
Weight 15 lbs
Dimensions 18 × 12 × 10 in
Weight 15 lbs
Dimensions 18 × 12 × 10 in