In Stock

GW Instek GTP-250A-2 BNC Male Connector Probe for 250MHz Oscilloscopes

Available for Quote

The GTP-250A is a passive high impendence oscilloscope probe designed and calibrated for use on instrument having an input impedance of 1MW shunted by 20pF.

View List
SKU: N_GW Instek GTP-250A-2 Category: Tag:

Quick Comparison

SettingsGW Instek GTP-250A-2 BNC Male Connector Probe for 250MHz Oscilloscopes removeGW Instek GDP-025 High Voltage Differential Probe, 25MHz Bandwidth, 9VDC Power Supply removeGW Instek GCP-530 50MHz/30A AC/DC Current Probe removeGW Instek GCP-206P Current Probe Power Supply with 2 Input Channel, 600mA, 12V removeProbe Master 4901-1KRA Passive Voltage Probe with Readout, 150MHz, 1X/10X, 600V, 3.5ft, DELUXE KIT removeProbe Master 4233 Differential Probe, 100MHz, 10X/100X, 700V remove
Image
SKUN_GW Instek GTP-250A-2N_GW Instek GDP-025N_GW Instek GCP-530N_GW Instek GCP-206PN_Probe Master 4901-1KRAN_Probe Master 4233
Rating
PriceAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for Quote
Stock
Availability
Add to cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

DescriptionThe GTP-250A is a passive high impendence oscilloscope probe designed and calibrated for use on instrument having an input impedance of 1MW shunted by 20pF.
ContentThe GDP series probe provide 25MHz, 50MHz and 100MHz bandwidth, enabling users to safely make high-voltage measurements on floating circuit test. GDP series high-voltage differential probe converts floating signals to low-voltage ground-referenced signals that can be displayed safely and easily on any ground-referenced oscilloscopeWith a flat frequency response, low noise and low insertion loss, the GCP-530 and GCP-1030 clamp-on probes are ideal for measuring steady state or transient current in amplifiers, inverters, electric motors, switching power supplies, controllers, sensors, LCD displays and electronic ballasts. For low current measurements, the high signal-to-noise ratio also makes the GCP-530 and GCP-1030 current probes ideal solutions.The GCP-206P two-channel current probe power supplies designed for the GCP-530 and GCP-1030 clamp current probes. The power supplies are ideal for when power is not available from an oscilloscope. Also use for general current measurement applications.
  • 18 Piece Kit with Case
  • Low Resistance Gold Contacts
  • Switchable Readout Actuator
  • Interchangable Tips (.030in and .055in diameter)
  • Accessory Kit: Sprung Hook, 6" Ground Lead, Trimmer Tool, I.C. Test Tip, Tip Insulator, Spare Tip, BNC Adapter, Channel Markers, 12" Ground Lead, Pincer Hook, Pico Hook,Wire Wrap Tip, Wire Wrap Ground, Alligator Tip, High Frequency Ground, Extender Tip 4", and Black Vinyl 3 Fold Pouch.
Weight223410.3
Dimensions7 × 10 × 2 in11 × 11.25 × 2.25 in16.93 × 15.35 × 12.2 in12 × 10 × 6 inN/A7 × 3 × 2 in
Additional information
Weight 2 lbs
Dimensions 7 × 10 × 2 in
Weight 2 lbs
Dimensions 11 × 11.25 × 2.25 in
Weight 3 lbs
Dimensions 16.93 × 15.35 × 12.2 in
Weight 4 lbs
Dimensions 12 × 10 × 6 in
Weight 1 lbs
Weight 0.3 lbs
Dimensions 7 × 3 × 2 in