Name: GW Instek PSW 250-13.5 DC Power Supply, 250 V, 13.5 A, 1080W
SKU: N_GW Instek PSW 250-13.5
Availability: InStock

In Stock

GW Instek PSW 250-13.5 DC Power Supply, 250 V, 13.5 A, 1080W

Available for Quote

Voltage Rating: 250V, Output Power Rating: 1080W
Constant Power Output for Multiple Range (V&I) Operation
CV/CC Priority; Particularly Suitable for the Battery and LED Industry
Adjustable Slew Rate
Series Operation: Up to 2 units (30V, 80V, 160V models only)
Parallel Operation: Up to 3 units
High Efficiency and High Power Density
1/2, 1/3, 1/6 Rack Mount Size Design (EIA/JIS Standard) for 360W/720W/1080W
Standard Interface: LAN,USB,Analog Control Interface
Optional Interface: GPIB-USB Adaptor
LabView Driver

Add to wishlist

SKU: N_GW Instek PSW 250-13.5 Category: Power Supplies Tag: GWInstek

Description

Description

The CV/CC priority selection of the PSW-Series is a very useful feature for DUT protection. The conventional power supply normally operates under CV mode when the power output is turned on. This could bring a high inrush current to the capacitive load or current-intensive load at the power output-on stage. Taking the I-V curve verification of LED as an example, it becomes a very challenging task to perform this measurement using a conventional power supply. With LED connected to a power supply under CV mode as the initial setting, when the power output is turned on and the voltage rises to the LED forward voltage, the current will suddenly peak up and exceed the preset value of current limit. Upon detecting this high current, the power supply starts the transition from CV mode to CC mode. Though the current becomes stable after the CC mode is activated, the current spike occurred at the CV and CC crossover point may possibly damage the DUT. At the power output-on stage, the PSW-Series is able to run under CC priority to limit the current spike occurred at the threshold voltage and therefore protect DUT from the inrush current damage.

The adjustable slew rate of the PSW-Series allows user to set for either output voltage or output current a specific rise time at the low to high level transition, and a specific fall time at the high to low level transition. This facilitates the characteristic verification of a DUT during voltage or current level changes with controllable slew rates. The manufacturing tests of lighting device or large capacitor during power output-on are mostly associated with the occurrence of high surge current, which can greatly reduce the life time of the DUT. To prevent inrush current from damaging current-intensive devices, a smooth and slow voltage transition during power on-off can significantly reduce the spike current and protect the device from high current damage.

The OVP and OCP are provided with the PSW-Series. Both OVP and OCP levels can be selected, with default level set at 110%, of the rated voltage/current of the power supply. When any of the protection level is tripped, the power output will be switched off to protect the DUT. The PSW-Series provides USB Host/Device and LAN interfaces as standard and GPIB-USB adaptor as optional. The LabView driver and the Data Logging PC software are supported on all the available interfaces. An analog control/monitoring connector is also available on the rear panel for external control of power On/Off and external monitoring of power output Voltage and Current.

Manufacturer Specs

Model	PSW 250-4.5	PSW 250-9	PSW 250-13.5	PSW 800-1.44	PSW 800-2.88	PSW 800-4.32
OUTPUT RATING
Voltage	0 ~ 250V			0 ~ 800V
Current	0 ~ 4.5A	0 ~ 9A	0 ~ 13.5A	0 ~ 1.44A	0 ~ 2.88A	0 ~ 4.32A
Power	360W	720W	1080W	360W	720W	1080W
REGULATION (CV)
Load	0.05% of rating + 5mV
Line	0.05% of rating + 3mV
REGULATION (CC)
Load	0.1% of rating + 5mA
Line	0.1% of rating + 5mA
CV p-p	80mV	100mV	120mV	150mV	200mV	200mV
CV rms	15mV			30mV
CC rms	10mA	20mA	30mA	5mA	10mA	15mA
Voltage	0.1%+200mV			0.1%+400mV
Current	0.1%+5mA	0.1%+10mA	0.1%+15mA	0.1%+2mA	0.1%+4mA	0.1%+6mA
READBACK ACCURACY
Voltage	0.1%+200mV			0.1%+400mV
Current	0.1%+5mA	0.1%+10mA	0.1%+15mA	0.1%+2mA	0.1%+4mA	0.1%+6mA
RESPONSE TIME
Raise Time	100ms			150ms
Fall Time(Full load)	150ms			300ms
Fall Time(No load)	1200ms			2000ms
Load Transient Recover Time(Load change from 50 to 100%)	2ms
PROGRAMMING RESOLUTION (By PC Remote Control Mode)
Voltage	5mV			14mV
	1mA
MEASUREMENT RESOLUTION (By PC Remote Control Mode)
Voltage	5mV			14mV
	1mA
SERIES AND PARALLEL CAPABILITY
Parallel Operation	Up to 3 units including the master unit
Series Operation	N/A
PROTECTION FUNCTION
OVP	10% to 110% of rated output voltage range
OCP	10% to 110% of rated output current range
OHP	Activated by elecated internal temperature
FRONT PANEL DISPLAY ACCURACY
Voltage	0.1% ± 2 digits			0.1% ± 4 digits
Current	0.1% ± 5 digits	0.1% ± 10 digits	0.1% ± 20 digits	0.1% ± 2 digits	0.1% ± 4 digits	0.1% ± 6 digits
ENVIRONMENT CONDITION
Operation Temp	0°C to 50°C
Storage Temp	—25°C to 70°C
Operating Humidity	20% to 85% RH
Storage Humidity	90% RH or Less
TEMP COEFFICIENT( after 30 minutes warm up)
Voltage	100ppm/°C
Current	200ppm/°C
OTHER
Analog Control	Yes
Interface	USB/LAN/GPIB(Option)
FAN	With thermal sensing control
Power Source	85VAC ~ 265VAC, 50/60Hz, Single phase
Dimension & Weight	71(W) x 124(H) x 350(D)mm; Approx. 3kg	142.5(W) x 124(H) x 350(D)mm; Approx. 5kg	214(W) x 124(H) x 350(D)mm; Approx. 7kg	71(W) x 124(H) x 350(D)mm; Approx. 3kg	142.5(W) x 124(H) x 350(D)mm; Approx. 5kg	214(W) x 124(H) x 350(D)mm; Approx. 7kg

PSW-360W
Model		PSW	30-36	80-13.5	160-7.2	250-4.5	800-1.44
Rated Output Voltage		V	30	80	160	250	800
Rated Output Current		A	36	13.5	7.2	4.5	1.44
Rated Output Power		W	360	360	360	360	360
Power Ratio		—	3	3	3.2	3.125	3.2
Constant Voltage Mode		PSW	30-36	80-13.5	160-7.2	250-4.5	800-1.44
Line Regulation (*1)		mV	18	43	83	128	403
Load Regulation (*2)		mV	20	45	85	130	405
Ripple and Noise (*3)
	p-p (*4)	mV	60	60	60	80	150
	r.m.s (*5)	mV	7	7	12	15	30
Temperature coefficient		ppm/°C	100ppm/°C of rated output voltage, after a 30 minute warm-up.
Remote sense compensation voltage		V/wire	0.6	0.6	0.6	1	1
Rise Time (*6)
	Rated Load	ms	50	50	100	100	150
	No Load	ms	50	50	100	100	150
Fall Time (*7)
	Rated Load	ms	50	50	100	150	300
	No Load	ms	500	500	1000	1200	2000
Transient response time (*8)		ms	1	1	2	2	2
Constant Current Mode		PSW	30-36	80-13.5	160-7.2	250-4.5	800-1.44
Line regulation (*1)		mA	41	18.5	12.2	9.5	6.44
Load regulation (*9)		mA	41	18.5	12.2	9.5	6.44
Ripple and noise
	r.m.s (*5 )	mA	72	27	15	10	5
Temperature coefficient		ppm/°C	200ppm/°C of rated output current, after a 30 minute warm-up.
Protection Function		PSW	30-36	80-13.5	160-7.2	250-4.5	800-1.44
Over voltage protection (OVP)
	Setting range	V	3-33	8-88	16-176	20-275	20-880
	Setting accuracy		± (2% of rated output voltage)
Over current protection (OCP)
	Setting range	A	3.6-39.6	1.35-14.85	0.72-7.92	0.45-4.95	0.144-1.584
	Setting accuracy		± (2% of rated output current)
Over temperature protection (OTP)
	Operation		Turn the output off.
Low AC input protection (AC-FAIL)
	Operation		Turn the output off.
Power limit (POWER LIMIT)
	Operation		Over power limit.
	Value (fixed)		Approx. 105% of rated output power
Front Panel		PSW	30-36	80-13.5	160-7.2	250-4.5	800-1.44
Display, 4 digits
	Voltage accuracy 0.1% +	mV	20	20	100	200	400
	Current accuracy 0.1% +	mA	40	20	5	5	2
Programming and Measurement (Interface)		PSW	30-36	80-13.5	160-7.2	250-4.5	800-1.44
Voltage programming accuracy 0.1% +		mV	10	10	100	200	400
Current programming accuracy 0.1% +		mA	30	10	5	5	2
Voltage programming resolution		mV	1	2	3	5	14
Current programming resolution		mA	1	1	1	1	1
Voltage measurement accuracy 0.1% +		mV	10	10	100	200	400
Current measurement accuracy 0.1% +		mA	30	10	5	5	2
Voltage measurement resolution		mV	1	2	3	5	14
Current measurement resolution		mA	1	1	1	1	1
PSW-720W
Model		PSW	30-72	80-27	160-14.4	250-9	800-2.88
Rated Output Voltage		V	30	80	160	250	800
Rated Output Current		A	72	27	14.4	9	2.88
Rated Output Power		W	720	720	720	720	720
Power Ratio		—	3	3	3.2	3.125	3.2
Constant Voltage Mode		PSW	30-72	80-27	160-14.4	250-9	800-2.88
Line Regulation (*1)		mV	18	43	83	128	403
Load Regulation (*2)		mV	20	45	85	130	405
Ripple and Noise (*3)
	p-p (*4)	mV	80	80	80	100	200
	r.m.s (*5)	mV	11	11	15	15	30
Temperature coefficient		ppm/°C	100ppm/°C of rated output voltage, after a 30 minute warm-up.
Remote sense compensation voltage		V/wire	0.6	0.6	0.6	1	1
Rise Time (*6)
	Rated Load	ms	50	50	100	100	150
	No Load	ms	50	50	100	100	150
Fall Time (*7)
	Rated Load	ms	50	50	100	150	300
	No Load	ms	500	500	1000	1200	2000
Transient response time (*8)		ms	1	1	2	2	2
Constant Current Mode		PSW	30-72	80-27	160-14.4	250-9	800-2.88
Line regulation (*1)		mA	77	32	19.4	14	7.88
Load regulation (*9)		mA	77	32	19.4	14	7.88
Ripple and noise
	r.m.s (*5 )	mA	144	54	30	20	10
Temperature coefficient		ppm/°C	200ppm/°C of rated output current, after a 30 minute warm -up.
Protection Function		PSW	30-72	80-27	160-14.4	250-9	800-2.88
Over voltage protection (OVP)
	Setting range	V	3-33	8-88	16-176	20-275	20-880
	Setting accuracy		± (2% of rated output voltage)
Over current protection (OCP)
	Setting range	A	5-79.2	2.7-29.7	1.44-15.84	0.9-9.9	0.288-3.168
	Setting accuracy		± (2% of rated output current)
Over temperature protection (OTP)
	Operation		Turn the output off.
Low AC input protection (AC-FAIL)
	Operation		Turn the output off.
Power limit (POWER LIMIT)
	Operation		Over power limit.
	Value (fixed)		Approx. 105% of rated output power
Front Panel		PSW	30-72	80-27	160-14.4	250-9	800-2.88
Display, 4 digits
	Voltage accuracy 0.1% +	mV	20	20	100	200	400
	Current accuracy 0.1% +	mA	70	40	30	10	4
Programming and Measurement (Interface)		PSW	30-72	80-27	160-14.4	250-9	800-2.88
Voltage programming accuracy 0.1% +		mV	10	10	100	200	400
Current programming accuracy 0.1% +		mA	60	30	15	10	4
Voltage programming resolution		mV	1	2	3	5	14
Current programming resolution		mA	2	2	2	1	1
Voltage measurement accuracy 0.1% +		mV	10	10	100	200	400
Current measurement accuracy 0.1% +		mA	60	30	15	10	4
Voltage measurement resolution		mV	1	2	3	5	14
Current measurement resolution		mA	2	2	2	1	1
PSW-1080W
Model		PSW	30-108	80-40.5	160-21.6	250-13.5	800-4.32
Rated Output Voltage		V	30	80	160	250	800
Rated Output Current		A	108	40.5	21.6	13.5	4.32
Rated Output Power		W	1080	1080	1080	1080	1080
Power Ratio		—	3	3	3.2	3.125	3.2
Constant Voltage Mode		PSW	30-108	80-40.5	160-21.6	250-13.5	800-4.32
Line Regulation (*1)		mV	18	43	83	128	403
Load Regulation (*2)		mV	20	45	85	130	405
Ripple and Noise (*3)
	p-p (*4)	mV	100	100	100	120	200
	r.m.s (*5)	mV	14	14	20	15	30
Temperature coefficient		ppm/°C	100ppm/°C of ra ted output voltage, after a 30 minute warm-up.
Remote sense compensation voltage		V/wire	0.6	0.6	0.6	1	1
Rise Time (*6)
	Rated Load	ms	50	50	100	100	150
	No Load	ms	50	50	100	100	150
Fall Time (*7)
	Rated Load	ms	50	50	100	150	300
	No Load	ms	500	500	1000	1200	2000
Transient response time (*8)		ms	1	1	2	2	2
Constant Current Mode		PSW	30-108	80-40.5	160-21.6	250-13.5	800-4.32
Line regulation (*1)		mA	113	45.5	26.6	18.5	9.32
Load regulation (*9)		mA	113	45.5	26.6	18.5	9.32
Ripple and noise
	r.m.s (*5 )	mA	216	81	45	30	15
Temperature coefficient		ppm/°C	200ppm/°C of rated output current, after a 30 minute warm-up .
Protection Function		PSW	30-108	80-40.5	160-21.6	250-13.5	800-4.32
Over voltage protection (OVP)
	Setting range	V	3-33	8-88	16-176	20-275	20-880
	Setting accuracy		± (2% of rated output voltage)
Over current protection (OCP)
	Setting range	A	5-118.8	4.05-44.55	2.16-23.76	1.35-14.85	0.432-4.752
	Setting accuracy		± (2% of rated output current)
Over temperature protection (OTP)
	Operation		Turn the output off.
Low AC input protection (AC-FAIL)
	Operation		Turn the output off.
Power limit (POWER LIMIT)
	Operation		Over power limit.
	Value (fixed)		Approx. 105% of rated output power
Front Panel		PSW	30-108	80-40.5	160-21.6	250-13.5	800-4.32
Display, 4 digits
	Voltage accuracy 0.1% +	mV	20	20	100	200	400
	Current accuracy 0.1% +	mA	100	50	30	20	6
Programming and Measurement (Interface)		PSW	30-108	80-40.5	160-21.6	250-13.5	800-4.32
Voltage programming accuracy 0.1% +		mV	10	10	100	200	400
Current programming accuracy 0.1% +		mA	100	40	20	15	6
Voltage programming resolution		mV	1	2	3	5	14
Current programming resolution		mA	3	3	3	1	1
Voltage measurement accuracy 0.1% +		mV	10	10	100	200	400
Current measurement accuracy 0.1% +		mA	100	40	20	15	6
Voltage measurement resolution		mV	1	2	3	5	14
Current measurement resolution		mA	3	3	3	1	1
Common Specification
Input Characteristics		PSW	30V	80V	160V	250V	800V
Nominal input rating			100Vac to 240Vac, 50Hz to 60Hz, single phase
Input voltage range			85Vac ~ 265Vac
Input voltage range			47Hz ~ 63Hz
Maximum input current
	100Vac	A	360W: 5A, 720W: 10A, 1080W: 15A
	200Vac	A	360W: 2.5A, 720W: 5A, 1080W: 7.5A
Inrush current		A	< 25A for 360W, < 50A for 720W, < 75A for 1080W
Maximum input power		VA	360W: 500VA, 720W: 1000VA, 1080W: 1500VA
Power factor
	100Vac		0.99
	200Vac		0.97
Efficiency
	100Vac	%	77	78	79	79	80
	200Vac	%	79	80	81	81	82
Hold-up time			20ms or greater
Analog Programming and Monitoring		PSW	30V	80V	160V	250V	800V
External voltage control output voltage			Accuracy and linearity: ±0.5% of rated output voltage.
External voltage control output current			Accuracy and linearity: ±1% of rated output current.
External resistor control output voltage			Accuracy and linearity: ±1.5% of rated output voltage.
External resistor control output current			Accuracy and linearity: ±1.5% of rated output current.
Output voltage monitor
	Accuracy	%	±1	±1	±1	±2	±2
Output current monitor
	Accuracy	%	±1	±1	±1	±2	±2
Shutdown control			Turns the output off with a LOW (0V to 0.5V) or short-circuit.
Output on/off control			Possible logic selections: Turn the output on using a LOW (0V to 0.5V) or short-circuit, turn the output off using a HIGH (4.5V to 5V) or open-circuit. Turn the output on using a HIGH (4.5V to 5V) or open-circuit, turn the output off using a LOW (0V to 0.5V) or short-circuit.
CV/CC/ALM/PWR ON/OUT ON indicator			Photocoupler open collector output; Maximum voltage 30V, maximum sink current 8mA.
Series and Parallel Capability		PSW	30V	80V	160V	250V	800V
Parallel number		Units	3	3	3	3	3
Series Number		Units	2	2	2	None	None
Front Panel
Indications			GREEN LED’s: CV, CC, VSR, ISR, DLY, RMT, 20, 40, 60, 80, 100, %W, W, V, A RED LED’s: ALM
Buttons			Function, OVP/OCP, Set, Test, Lock/Local, PWR DSPL, Output
Knobs			Voltage, Current
USB port			Type A USB connector
Interface Capabilities
USB			TypeA: Host, TypeB: Slave, Speed: 1.1/2.0, USB Class: CDC(Communications Device Class)
LAN			MAC Address, DNS IP Address, User Password, Gateway IP Address, Instrument IP Address, Subnet Mask
GPIB			Optional: GUG-001 (GPIB to USB Adapter)
Environmental Conditions
Operating temperature			0˚C to 50˚C
Storage temperature			-25˚C to 70˚C
Operating humidity			20% to 85% RH; No condensation
Storage humidity			90% RH or less; No condensation
Altitude			Maximum 2000m
General Specifications
Weight (main unit only)		kg	Approx. 3kg for 360W, Approx. 5.3kg for 720W, Approx. 7.5kg for 1080W
Dimensions (WxHxD)		mm3	360W: 71×124×350mm, 720W: 142×124×350mm, 1080W: 214×124×350mm
Cooling			Forced air cooling by internal fan.
EMC			Complies with the European EMC directive 2004/108 /EC for Class A test and measurement products.
Safety			Complies with the European Low Voltage Directive 2006 /95/EC and carries the CE-marking.
Withstand voltage			Between input and chassis: No abnormalities at 1500 Vac for 1 minute.
			Between input and output: No abnormalities at 3000 Vac for 1 minute.
			Between output and chassis: No abnormalities at 500 Vdc for 1 minute for 30V, 80V, 160V models.
			No abnormalities at 1500 Vdc for 1 minute for 250V, 800V models.
Insulation resistance			Between input and chassis: 500 Vdc, 100MΩ or more
			Between input and output: 500 Vdc, 100MΩ or more
			Between output and chassis: 500 Vdc, 100MΩ or more for 30V, 80V, 160V and 250V models.
			1000Vdc, 100MΩ or more for 800V models.
Notes 1: At 85 ~ 132Vac or 170 ~ 265Vac, constant load. 2: From No-load to Full-load, constant input voltage. Measured at the sensing point in Remote Sense. 3: Measure with JEITA RC-9131B (1:1) probe 4: Measurement frequency bandwidth is 10Hz to 20MHz. 5: Measurement frequency bandwidth is 5Hz to 1MHz. 6: From 10% to 90% of rated output voltage, with rated resistive load. 7: From 90% to 10% of rated output voltage, with rated resistive load. 8: Time for output voltage to recover within 0.1% + 10mV of its rated output for a load change from 50 to 100% of its rated output current. *9: For load voltage change, equal to the unit voltage rating, constant input voltage.

Tech Specs

Power Supplies/DC Power Supplies Template
Outputs	Single
Voltage Output 1	Variable
Max Voltage Output 1	250 V
Min Voltage Output 1	0 V
Programmable	Yes
Current Output 1	Variable
Max Current Output 1	13.5 A
Min Current Output 1	0 A
Meter Type	Digital
Switching	Yes
Linear/Switching	Switching
Max Display Resolution Current	1 mA
Max Display Resolution Voltage	5 mV
Constant current/voltage	Yes
Remote Sensing	Yes
Test Equipment General Attributes
Unique Features	Constant Power Output for Multiple Range (V&I) Operation CV/CC Priority; Particularly Suitable for the Battery and LED Industry Adjustable Slew Rate Bleeder Control Test Sequence Function Output On/Off delay function Series and Parallel Operation (2 units in Series / 3 units in Parallel Maximum) High Efficiency and High Power Density Labview Driver
Warranty	2 YEARS

Quick Comparison

Settings GW Instek PSW 250-13.5 DC Power Supply, 250 V, 13.5 A, 1080W remove Instek GPD-4303S 200W Quadruple-Output Programmable Linear DC Power Supply, 30V DC, 3 Amp, 1mV, 1-milliamp Resolution remove GW Instek GPR-0830HD Series GPR-H Single Output Linear DC Power Supply with LED Display, 30 Output Amps, 8 Output Volts, 240 Output Watts remove GW Instek GPE-1326 Multi-Output DC Power Supply, Single Channel, 192W, 0-32 VDC, 0-6A remove GW Instek GPE-3323 GPE-X323 Multi-Output DC Power Supply, 3 Channel, 217W, 0-32 VDC, 0-3A, 5V/5A remove Instek GPD-3303S 195W Triple-Output Programmable Linear DC Power Supply, 30V DC, 3 Amp, 1mV, 1-milliamp Resolution remove

Image

SKU N_GW Instek PSW 250-13.5 N_GW Instek GPD-4303S N_GW Instek GPR-0830HD N_GW Instek GPE-1326 N_GW Instek GPE-3323 N_GW Instek GPD-3303S

Rating

Price Available for Quote Available for Quote Available for Quote Available for Quote Available for Quote Available for Quote

Stock

Availability

Add to cart

Add to Cart

Description

Voltage Rating: 250V, Output Power Rating: 1080W
Constant Power Output for Multiple Range (V&I) Operation
CV/CC Priority; Particularly Suitable for the Battery and LED Industry
Adjustable Slew Rate
Series Operation: Up to 2 units (30V, 80V, 160V models only)
Parallel Operation: Up to 3 units
High Efficiency and High Power Density
1/2, 1/3, 1/6 Rack Mount Size Design (EIA/JIS Standard) for 360W/720W/1080W
Standard Interface: LAN,USB,Analog Control Interface
Optional Interface: GPIB-USB Adaptor
LabView Driver

195W, 4ch Output DC Programmable Power Supply 4 Outputs for GPD-4303S High Resolution Display 1mV / 1mA (GPD-X303S) CH1/CH2 Output: 30V / 3A CH3 Selectable Output: 5V/3A ; 5.001V-10V /1A (GPD-4303S) CH4 Output: 5V / 1A (GPD-4303S) Auto Series / Parallel Tracking Mode Digital Panel ControlRotary Encoder Switch and Rubber Key with Backlight 4 Sets SAVE / RECALL panel setting User Friendly Operation, Coarse and Fine Voltage Control Warring Buzzer Output On / Off Switch USB Device for Remote Control (Baud Rate 115200 bps Maximum) Free downloadable PC software Smart Cooling Fan with Low Noise Safety Design: Reverse Polarity, Overload Protection

240W DC Linear Power Supply 0-8V, 0-30A 0-8V, 0-30A 0.01% High Regulation Constant Voltage and Constant Current Operation Internal Select for Continuous or Dynamic Load Low Ripple and Noise Overload and Reverse Polarity Protection 3 1/2 Digit 0.5" LED Display

192W Single Channel DC Power Supply GPE-1326 Single Channel, 192W Linear DC Power Supply 1 Independent Isolated Output 10mv min resolution 1ma min resolution 4.3 Inch LCD Display Setting & Read back Resolution 10mA / 1mA Output ON/OFF Analog Control (Remote I/O) for Output ON / OFF Set View function for checking an original V / I setting during output on Key Lock Function Tracking series and parallel operation Smart cooling fan achieving low noise Optional European Jack Type Terminal

217W 3 Channel DC Power Supply GPE-3323 3 Channels, 217W Linear DC Power Supply 3 Independent Isolated Output 10mv min resolution 1ma min resolution 4.3 Inch LCD Display Setting & Read back Resolution 10mA / 1mA Output ON/OFF Analog Control (Remote I/O) for Output ON / OFF Set View function for checking an original V / I setting during output on Key Lock Function Tracking series and parallel operation Smart cooling fan achieving low noise Optional European Jack Type Terminal

0-30Vx2,0-3Ax2; 2.5V/3.3V/5V,3A, USB; 4 3/4 digit Three Independent Output : 30V/3A x 2, 2.5V/3.3V/5V/3A x 1 4 LED Display Sets : 3 Digits After Decimal Point Minimum Resolution : 1mV/1mA Digital Panel Control (Rotary Encoder Switch, Rubber Key With Indicator) Key-Lock User-Friendly Operation, Coarse/Fine Voltage Control 4 Panel Settings Save/Recall (Plus Factory Settings Recall) Output ON/OFF Tracking Series and Parallel Mode USB Device for Remote Control (Baud Rate 115200 bps Maximum) Free downloadable PC software Smart Cooling Fan Achieving Low Noise Warning Buzzer Light-Weight and Compact Design

Content

The PSW-Series is a single-output multi-range programmable switching DC Power Supply covering a power range up to 1080W. This series of products include fifteen models with the combination of 30V, 80V, 160V, 250V, and 800V rated voltages and 360W, 720W and 1080W maximum output powers. The multi-range feature allows the flexible and efficient configuration of voltage and current within the rated power range. As the PSW-Series can be connected in series for maximum 2 units or in parallel for maximum 3 units, the capability of connecting multiple PSW units for higher voltage or higher current output provides a broad coverage of applications. With the flexibility of multi-range power utilization and series/parallel connection, the PSW Series significantly reduces the user’s investment for various power supply products to accommodate the projects with different power requirements. The CV/CC priority selection of the PSW-Series is a very useful feature for DUT protection. The conventional power supply normally operates under CV mode when the power output is turned on. This could bring a high inrush current to the capacitive load or current-intensive load at the power output-on stage. Taking the I-V curve verification of LED as an example, it becomes a very challenging task to perform this measurement using a conventional power supply. With LED connected to a power supply under CV mode as the initial setting, when the power output is turned on and the voltage rises to the LED forward voltage, the current will suddenly peak up and exceed the preset value of current limit. Upon detecting this high current, the power supply starts the transition from CV mode to CC mode. Though the current becomes stable after the CC mode is activated, the current spike occurred at the CV and CC crossover point may possibly damage the DUT. At the power output-on stage, the PSW-Series is able to run under CC priority to limit the current spike occurred at the threshold voltage and therefore protect DUT from the inrush current damage. The adjustable slew rate of the PSW-Series allows user to set for either output voltage or output current a specific rise time at the low to high level transition, and a specific fall time at the high to low level transition. This facilitates the characteristic verification of a DUT during voltage or current level changes with controllable slew rates. The manufacturing tests of lighting device or large capacitor during power output-on are mostly associated with the occurrence of high surge current, which can greatly reduce the life time of the DUT. To prevent inrush current from damaging current-intensive devices, a smooth and slow voltage transition during power on-off can significantly reduce the spike current and protect the device from high current damage. The OVP and OCP are provided with the PSW-Series. Both OVP and OCP levels can be selected, with default level set at 110%, of the rated voltage/current of the power supply. When any of the protection level is tripped, the power output will be switched off to protect the DUT. The PSW-Series provides USB Host/Device and LAN interfaces as standard and GPIB-USB adaptor as optional. The LabView driver and the Data Logging PC software are supported on all the available interfaces. An analog control/monitoring connector is also available on the rear panel for external control of power On/Off and external monitoring of power output Voltage and Current.

Manufacturer Specs

Model	PSW 250-4.5	PSW 250-9	PSW 250-13.5	PSW 800-1.44	PSW 800-2.88	PSW 800-4.32
OUTPUT RATING
Voltage	0 ~ 250V			0 ~ 800V
Current	0 ~ 4.5A	0 ~ 9A	0 ~ 13.5A	0 ~ 1.44A	0 ~ 2.88A	0 ~ 4.32A
Power	360W	720W	1080W	360W	720W	1080W
REGULATION (CV)
Load	0.05% of rating + 5mV
Line	0.05% of rating + 3mV
REGULATION (CC)
Load	0.1% of rating + 5mA
Line	0.1% of rating + 5mA
CV p-p	80mV	100mV	120mV	150mV	200mV	200mV
CV rms	15mV			30mV
CC rms	10mA	20mA	30mA	5mA	10mA	15mA
Voltage	0.1%+200mV			0.1%+400mV
Current	0.1%+5mA	0.1%+10mA	0.1%+15mA	0.1%+2mA	0.1%+4mA	0.1%+6mA
READBACK ACCURACY
Voltage	0.1%+200mV			0.1%+400mV
Current	0.1%+5mA	0.1%+10mA	0.1%+15mA	0.1%+2mA	0.1%+4mA	0.1%+6mA
RESPONSE TIME
Raise Time	100ms			150ms
Fall Time(Full load)	150ms			300ms
Fall Time(No load)	1200ms			2000ms
Load Transient Recover Time(Load change from 50 to 100%)	2ms
PROGRAMMING RESOLUTION (By PC Remote Control Mode)
Voltage	5mV			14mV
	1mA
MEASUREMENT RESOLUTION (By PC Remote Control Mode)
Voltage	5mV			14mV
	1mA
SERIES AND PARALLEL CAPABILITY
Parallel Operation	Up to 3 units including the master unit
Series Operation	N/A
PROTECTION FUNCTION
OVP	10% to 110% of rated output voltage range
OCP	10% to 110% of rated output current range
OHP	Activated by elecated internal temperature
FRONT PANEL DISPLAY ACCURACY
Voltage	0.1% ± 2 digits			0.1% ± 4 digits
Current	0.1% ± 5 digits	0.1% ± 10 digits	0.1% ± 20 digits	0.1% ± 2 digits	0.1% ± 4 digits	0.1% ± 6 digits
ENVIRONMENT CONDITION
Operation Temp	0°C to 50°C
Storage Temp	—25°C to 70°C
Operating Humidity	20% to 85% RH
Storage Humidity	90% RH or Less
TEMP COEFFICIENT( after 30 minutes warm up)
Voltage	100ppm/°C
Current	200ppm/°C
OTHER
Analog Control	Yes
Interface	USB/LAN/GPIB(Option)
FAN	With thermal sensing control
Power Source	85VAC ~ 265VAC, 50/60Hz, Single phase
Dimension & Weight	71(W) x 124(H) x 350(D)mm; Approx. 3kg	142.5(W) x 124(H) x 350(D)mm; Approx. 5kg	214(W) x 124(H) x 350(D)mm; Approx. 7kg	71(W) x 124(H) x 350(D)mm; Approx. 3kg	142.5(W) x 124(H) x 350(D)mm; Approx. 5kg	214(W) x 124(H) x 350(D)mm; Approx. 7kg

PSW-360W
Model		PSW	30-36	80-13.5	160-7.2	250-4.5	800-1.44
Rated Output Voltage		V	30	80	160	250	800
Rated Output Current		A	36	13.5	7.2	4.5	1.44
Rated Output Power		W	360	360	360	360	360
Power Ratio		--	3	3	3.2	3.125	3.2
Constant Voltage Mode		PSW	30-36	80-13.5	160-7.2	250-4.5	800-1.44
Line Regulation (*1)		mV	18	43	83	128	403
Load Regulation (*2)		mV	20	45	85	130	405
Ripple and Noise (*3)
	p-p (*4)	mV	60	60	60	80	150
	r.m.s (*5)	mV	7	7	12	15	30
Temperature coefficient		ppm/°C	100ppm/°C of rated output voltage, after a 30 minute warm-up.
Remote sense compensation voltage		V/wire	0.6	0.6	0.6	1	1
Rise Time (*6)
	Rated Load	ms	50	50	100	100	150
	No Load	ms	50	50	100	100	150
Fall Time (*7)
	Rated Load	ms	50	50	100	150	300
	No Load	ms	500	500	1000	1200	2000
Transient response time (*8)		ms	1	1	2	2	2
Constant Current Mode		PSW	30-36	80-13.5	160-7.2	250-4.5	800-1.44
Line regulation (*1)		mA	41	18.5	12.2	9.5	6.44
Load regulation (*9)		mA	41	18.5	12.2	9.5	6.44
Ripple and noise
	r.m.s (*5 )	mA	72	27	15	10	5
Temperature coefficient		ppm/°C	200ppm/°C of rated output current, after a 30 minute warm-up.
Protection Function		PSW	30-36	80-13.5	160-7.2	250-4.5	800-1.44
Over voltage protection (OVP)
	Setting range	V	3-33	8-88	16-176	20-275	20-880
	Setting accuracy		± (2% of rated output voltage)
Over current protection (OCP)
	Setting range	A	3.6-39.6	1.35-14.85	0.72-7.92	0.45-4.95	0.144-1.584
	Setting accuracy		± (2% of rated output current)
Over temperature protection (OTP)
	Operation		Turn the output off.
Low AC input protection (AC-FAIL)
	Operation		Turn the output off.
Power limit (POWER LIMIT)
	Operation		Over power limit.
	Value (fixed)		Approx. 105% of rated output power
Front Panel		PSW	30-36	80-13.5	160-7.2	250-4.5	800-1.44
Display, 4 digits
	Voltage accuracy 0.1% +	mV	20	20	100	200	400
	Current accuracy 0.1% +	mA	40	20	5	5	2
Programming and Measurement (Interface)		PSW	30-36	80-13.5	160-7.2	250-4.5	800-1.44
Voltage programming accuracy 0.1% +		mV	10	10	100	200	400
Current programming accuracy 0.1% +		mA	30	10	5	5	2
Voltage programming resolution		mV	1	2	3	5	14
Current programming resolution		mA	1	1	1	1	1
Voltage measurement accuracy 0.1% +		mV	10	10	100	200	400
Current measurement accuracy 0.1% +		mA	30	10	5	5	2
Voltage measurement resolution		mV	1	2	3	5	14
Current measurement resolution		mA	1	1	1	1	1
PSW-720W
Model		PSW	30-72	80-27	160-14.4	250-9	800-2.88
Rated Output Voltage		V	30	80	160	250	800
Rated Output Current		A	72	27	14.4	9	2.88
Rated Output Power		W	720	720	720	720	720
Power Ratio		--	3	3	3.2	3.125	3.2
Constant Voltage Mode		PSW	30-72	80-27	160-14.4	250-9	800-2.88
Line Regulation (*1)		mV	18	43	83	128	403
Load Regulation (*2)		mV	20	45	85	130	405
Ripple and Noise (*3)
	p-p (*4)	mV	80	80	80	100	200
	r.m.s (*5)	mV	11	11	15	15	30
Temperature coefficient		ppm/°C	100ppm/°C of rated output voltage, after a 30 minute warm-up.
Remote sense compensation voltage		V/wire	0.6	0.6	0.6	1	1
Rise Time (*6)
	Rated Load	ms	50	50	100	100	150
	No Load	ms	50	50	100	100	150
Fall Time (*7)
	Rated Load	ms	50	50	100	150	300
	No Load	ms	500	500	1000	1200	2000
Transient response time (*8)		ms	1	1	2	2	2
Constant Current Mode		PSW	30-72	80-27	160-14.4	250-9	800-2.88
Line regulation (*1)		mA	77	32	19.4	14	7.88
Load regulation (*9)		mA	77	32	19.4	14	7.88
Ripple and noise
	r.m.s (*5 )	mA	144	54	30	20	10
Temperature coefficient		ppm/°C	200ppm/°C of rated output current, after a 30 minute warm -up.
Protection Function		PSW	30-72	80-27	160-14.4	250-9	800-2.88
Over voltage protection (OVP)
	Setting range	V	3-33	8-88	16-176	20-275	20-880
	Setting accuracy		± (2% of rated output voltage)
Over current protection (OCP)
	Setting range	A	5-79.2	2.7-29.7	1.44-15.84	0.9-9.9	0.288-3.168
	Setting accuracy		± (2% of rated output current)
Over temperature protection (OTP)
	Operation		Turn the output off.
Low AC input protection (AC-FAIL)
	Operation		Turn the output off.
Power limit (POWER LIMIT)
	Operation		Over power limit.
	Value (fixed)		Approx. 105% of rated output power
Front Panel		PSW	30-72	80-27	160-14.4	250-9	800-2.88
Display, 4 digits
	Voltage accuracy 0.1% +	mV	20	20	100	200	400
	Current accuracy 0.1% +	mA	70	40	30	10	4
Programming and Measurement (Interface)		PSW	30-72	80-27	160-14.4	250-9	800-2.88
Voltage programming accuracy 0.1% +		mV	10	10	100	200	400
Current programming accuracy 0.1% +		mA	60	30	15	10	4
Voltage programming resolution		mV	1	2	3	5	14
Current programming resolution		mA	2	2	2	1	1
Voltage measurement accuracy 0.1% +		mV	10	10	100	200	400
Current measurement accuracy 0.1% +		mA	60	30	15	10	4
Voltage measurement resolution		mV	1	2	3	5	14
Current measurement resolution		mA	2	2	2	1	1
PSW-1080W
Model		PSW	30-108	80-40.5	160-21.6	250-13.5	800-4.32
Rated Output Voltage		V	30	80	160	250	800
Rated Output Current		A	108	40.5	21.6	13.5	4.32
Rated Output Power		W	1080	1080	1080	1080	1080
Power Ratio		--	3	3	3.2	3.125	3.2
Constant Voltage Mode		PSW	30-108	80-40.5	160-21.6	250-13.5	800-4.32
Line Regulation (*1)		mV	18	43	83	128	403
Load Regulation (*2)		mV	20	45	85	130	405
Ripple and Noise (*3)
	p-p (*4)	mV	100	100	100	120	200
	r.m.s (*5)	mV	14	14	20	15	30
Temperature coefficient		ppm/°C	100ppm/°C of ra ted output voltage, after a 30 minute warm-up.
Remote sense compensation voltage		V/wire	0.6	0.6	0.6	1	1
Rise Time (*6)
	Rated Load	ms	50	50	100	100	150
	No Load	ms	50	50	100	100	150
Fall Time (*7)
	Rated Load	ms	50	50	100	150	300
	No Load	ms	500	500	1000	1200	2000
Transient response time (*8)		ms	1	1	2	2	2
Constant Current Mode		PSW	30-108	80-40.5	160-21.6	250-13.5	800-4.32
Line regulation (*1)		mA	113	45.5	26.6	18.5	9.32
Load regulation (*9)		mA	113	45.5	26.6	18.5	9.32
Ripple and noise
	r.m.s (*5 )	mA	216	81	45	30	15
Temperature coefficient		ppm/°C	200ppm/°C of rated output current, after a 30 minute warm-up .
Protection Function		PSW	30-108	80-40.5	160-21.6	250-13.5	800-4.32
Over voltage protection (OVP)
	Setting range	V	3-33	8-88	16-176	20-275	20-880
	Setting accuracy		± (2% of rated output voltage)
Over current protection (OCP)
	Setting range	A	5-118.8	4.05-44.55	2.16-23.76	1.35-14.85	0.432-4.752
	Setting accuracy		± (2% of rated output current)
Over temperature protection (OTP)
	Operation		Turn the output off.
Low AC input protection (AC-FAIL)
	Operation		Turn the output off.
Power limit (POWER LIMIT)
	Operation		Over power limit.
	Value (fixed)		Approx. 105% of rated output power
Front Panel		PSW	30-108	80-40.5	160-21.6	250-13.5	800-4.32
Display, 4 digits
	Voltage accuracy 0.1% +	mV	20	20	100	200	400
	Current accuracy 0.1% +	mA	100	50	30	20	6
Programming and Measurement (Interface)		PSW	30-108	80-40.5	160-21.6	250-13.5	800-4.32
Voltage programming accuracy 0.1% +		mV	10	10	100	200	400
Current programming accuracy 0.1% +		mA	100	40	20	15	6
Voltage programming resolution		mV	1	2	3	5	14
Current programming resolution		mA	3	3	3	1	1
Voltage measurement accuracy 0.1% +		mV	10	10	100	200	400
Current measurement accuracy 0.1% +		mA	100	40	20	15	6
Voltage measurement resolution		mV	1	2	3	5	14
Current measurement resolution		mA	3	3	3	1	1
Common Specification
Input Characteristics		PSW	30V	80V	160V	250V	800V
Nominal input rating			100Vac to 240Vac, 50Hz to 60Hz, single phase
Input voltage range			85Vac ~ 265Vac
Input voltage range			47Hz ~ 63Hz
Maximum input current
	100Vac	A	360W: 5A, 720W: 10A, 1080W: 15A
	200Vac	A	360W: 2.5A, 720W: 5A, 1080W: 7.5A
Inrush current		A	< 25A for 360W, < 50A for 720W, < 75A for 1080W
Maximum input power		VA	360W: 500VA, 720W: 1000VA, 1080W: 1500VA
Power factor
	100Vac		0.99
	200Vac		0.97
Efficiency
	100Vac	%	77	78	79	79	80
	200Vac	%	79	80	81	81	82
Hold-up time			20ms or greater
Analog Programming and Monitoring		PSW	30V	80V	160V	250V	800V
External voltage control output voltage			Accuracy and linearity: ±0.5% of rated output voltage.
External voltage control output current			Accuracy and linearity: ±1% of rated output current.
External resistor control output voltage			Accuracy and linearity: ±1.5% of rated output voltage.
External resistor control output current			Accuracy and linearity: ±1.5% of rated output current.
Output voltage monitor
	Accuracy	%	±1	±1	±1	±2	±2
Output current monitor
	Accuracy	%	±1	±1	±1	±2	±2
Shutdown control			Turns the output off with a LOW (0V to 0.5V) or short-circuit.
Output on/off control			Possible logic selections: Turn the output on using a LOW (0V to 0.5V) or short-circuit, turn the output off using a HIGH (4.5V to 5V) or open-circuit. Turn the output on using a HIGH (4.5V to 5V) or open-circuit, turn the output off using a LOW (0V to 0.5V) or short-circuit.
CV/CC/ALM/PWR ON/OUT ON indicator			Photocoupler open collector output; Maximum voltage 30V, maximum sink current 8mA.
Series and Parallel Capability		PSW	30V	80V	160V	250V	800V
Parallel number		Units	3	3	3	3	3
Series Number		Units	2	2	2	None	None
Front Panel
Indications			GREEN LED's: CV, CC, VSR, ISR, DLY, RMT, 20, 40, 60, 80, 100, %W, W, V, A RED LED's: ALM
Buttons			Function, OVP/OCP, Set, Test, Lock/Local, PWR DSPL, Output
Knobs			Voltage, Current
USB port			Type A USB connector
Interface Capabilities
USB			TypeA: Host, TypeB: Slave, Speed: 1.1/2.0, USB Class: CDC(Communications Device Class)
LAN			MAC Address, DNS IP Address, User Password, Gateway IP Address, Instrument IP Address, Subnet Mask
GPIB			Optional: GUG-001 (GPIB to USB Adapter)
Environmental Conditions
Operating temperature			0˚C to 50˚C
Storage temperature			-25˚C to 70˚C
Operating humidity			20% to 85% RH; No condensation
Storage humidity			90% RH or less; No condensation
Altitude			Maximum 2000m
General Specifications
Weight (main unit only)		kg	Approx. 3kg for 360W, Approx. 5.3kg for 720W, Approx. 7.5kg for 1080W
Dimensions (WxHxD)		mm3	360W: 71×124×350mm, 720W: 142×124×350mm, 1080W: 214×124×350mm
Cooling			Forced air cooling by internal fan.
EMC			Complies with the European EMC directive 2004/108 /EC for Class A test and measurement products.
Safety			Complies with the European Low Voltage Directive 2006 /95/EC and carries the CE-marking.
Withstand voltage			Between input and chassis: No abnormalities at 1500 Vac for 1 minute.
			Between input and output: No abnormalities at 3000 Vac for 1 minute.
			Between output and chassis: No abnormalities at 500 Vdc for 1 minute for 30V, 80V, 160V models.
			No abnormalities at 1500 Vdc for 1 minute for 250V, 800V models.
Insulation resistance			Between input and chassis: 500 Vdc, 100MΩ or more
			Between input and output: 500 Vdc, 100MΩ or more
			Between output and chassis: 500 Vdc, 100MΩ or more for 30V, 80V, 160V and 250V models.
			1000Vdc, 100MΩ or more for 800V models.
Notes 1: At 85 ~ 132Vac or 170 ~ 265Vac, constant load. 2: From No-load to Full-load, constant input voltage. Measured at the sensing point in Remote Sense. 3: Measure with JEITA RC-9131B (1:1) probe 4: Measurement frequency bandwidth is 10Hz to 20MHz. 5: Measurement frequency bandwidth is 5Hz to 1MHz. 6: From 10% to 90% of rated output voltage, with rated resistive load. 7: From 90% to 10% of rated output voltage, with rated resistive load. 8: Time for output voltage to recover within 0.1% + 10mV of its rated output for a load change from 50 to 100% of its rated output current. *9: For load voltage change, equal to the unit voltage rating, constant input voltage.

Tech Specs

Power Supplies/DC Power Supplies Template
Outputs	Single
Voltage Output 1	Variable
Max Voltage Output 1	250 V
Min Voltage Output 1	0 V
Programmable	Yes
Current Output 1	Variable
Max Current Output 1	13.5 A
Min Current Output 1	0 A
Meter Type	Digital
Switching	Yes
Linear/Switching	Switching
Max Display Resolution Current	1 mA
Max Display Resolution Voltage	5 mV
Constant current/voltage	Yes
Remote Sensing	Yes
Test Equipment General Attributes
Unique Features	Constant Power Output for Multiple Range (V&I) Operation CV/CC Priority; Particularly Suitable for the Battery and LED Industry Adjustable Slew Rate Bleeder Control Test Sequence Function Output On/Off delay function Series and Parallel Operation (2 units in Series / 3 units in Parallel Maximum) High Efficiency and High Power Density Labview Driver
Warranty	2 YEARS

Weight 15 18 15 15 15 18

Dimensions 18 × 12 × 10 in 22 × 15 × 12 in 18 × 12 × 10 in 20 × 15 × 11 in 18 × 12 × 10 in 18 × 12 × 10 in

Additional information

Weight	15 lbs
Dimensions	18 × 12 × 10 in

Weight	18 lbs
Dimensions	22 × 15 × 12 in

Weight	15 lbs
Dimensions	18 × 12 × 10 in

Weight	15 lbs
Dimensions	20 × 15 × 11 in

Weight	15 lbs
Dimensions	18 × 12 × 10 in

Weight	18 lbs
Dimensions	18 × 12 × 10 in

Product Categories

Services

Promotion

GW Instek PSW 250-13.5 DC Power Supply, 250 V, 13.5 A, 1080W

Description

Manufacturer Specs

Tech Specs

Power Supplies/DC Power Supplies Template

Test Equipment General Attributes

Quick Comparison

Manufacturer Specs

Tech Specs

Power Supplies/DC Power Supplies Template

Test Equipment General Attributes

contact us

510-324-3001

Warehouse location

The Company

TOPDOGTEST Form

Product Categories

Services

Promotion

GW Instek PSW 250-13.5 DC Power Supply, 250 V, 13.5 A, 1080W

Description

Manufacturer Specs

Tech Specs

Power Supplies/DC Power Supplies Template

Test Equipment General Attributes

Quick Comparison

Manufacturer Specs

Tech Specs

Power Supplies/DC Power Supplies Template

Test Equipment General Attributes

Related products

Instek GPS-1850D 90W Single-Output Linear DC Power Supply with Digital LED screen, 18V DC, 5 Amp

GW Instek GPS-1830D High-Current, Single-Output DC Power Supply, 0 to 18 VDC, 0 to 3 A

GW Instek GPR-7550D Single Output Linear DC Power Supply with LED Display, 5 Output Amps, 75 Output Volts, 375 Output Watts

Instek PSU-03C Cable for 4 units in parallel operation

contact us

510-324-3001

Warehouse location

The Company

TOPDOGTEST Form