In Stock

GW Instek PST-3202GP Triple Output Programmable DC Power Supply with 3 Channels, GPIB, 158W

Available for Quote

  • Digitized Programmable Interface, High Resolution 10mV, 1mA
  • 192 * 128 LCD Display, Display Several Setting and Measuring Result Simultaneously (Variable Display Mode)
  • Intelligent Windows Operating Interface
  • Support Several Directly Buttons
  • Provided Auto Series and Parallel Function
  • High Stability, Low Drift
  • Over-Voltage, Over-Current, Over-Temperature Protection
  • Intelligent Fan Control (Change by Output Power)
  • Built-in Buzzer Alarm
  • 100 Sets Memory for Setting Save, Auto Running
  • Interface (Standard) RS-232
  • Interface (Option) GPIB (IEEE 488.2)
View List
SKU: N_GW Instek PST-3202GP Category: Tag:

Description

Instek PST-3202GP Programmable DC Power Supply with GPIB, 0-32V/0-2Ax2; 0-6V/0-5Ax1

  • An overall digitalization of programmable interface with high resolution
  • The 192×128 LCD Display can appear multiple settings and measurement results simultaneously (The display mode is changeable)
  • Intuitional, intelligent interface window display is convenient for user to operate the instrument
  • High stability and low draft
  • The function of over voltage/current/temperature protection
  • Intelligent control fan (Vary with different output power.

PST-Series Programmable Power Supply is controlled by Micro Processor Unit (MPU) that can easily connect communication interface RS-232 or GPIB to computer in order to satisfy users’ demand for auto-testing and auto-control.

The voltage and current are completely controlled by 12 bits D/A Converter with higher resolution and accuracy. Also, the digitalization of system makes a speedy, precise and convenient input of information controlled by keyboard.

The adjustment of voltage/current is made by software calibration without manual error that will increase the preciseness of the instrument. The function of Over Voltage Protection (OVP) and Over Current Protection (OCP) is set with software and detected with hardware to achieve protected function precisely and speedily in order to secure users from danger by using the instrument.

The PST series are 3-channel, 96 or 158W, programmable linear DC power supplies. High resolution, maintained at 10mV, 1mA ( 3A). OVP, OCP, and OTP, protects the PST-Series and its loads from unexpected conditions. The PST Series are capable of independent, series, or parallel operation for increased flexibility. The large LCD display conveniently displays all outputs and configurations simultaneously to simplify operation.

The programmable interface allows automatic stepping, 100 set of memory, and comprehensive timing operations. GPIB and RS232C interfaces, Labview driver,s and SCPI compatibility allow easy ATE software development and remote control. The versatile PST-Series is ideal for high resolution, multiple output, and automated operations such as production testing and rack mounting systems.

Other Features

  • Warning signal by the built-in Buzzer.
  • Step by step calibration procedure.
  • Brand new panel design and the 1/2 rack size reduction volume design.
  • Wheel knob of Fine and Coarse.
  • 100 groups storage space setting.
  • Parallel and series operation modes.
  • IEEE-488.2 and SCPI compatible command setting.
  • 0.1 sec timer for output working loop (Auto step running)
  • Correspond to CE safety regulation.

Manufacturer Specs

Tech Specs

Quick Comparison

SettingsGW Instek PST-3202GP Triple Output Programmable DC Power Supply with 3 Channels, GPIB, 158W removeInstek GPS-1850D 90W Single-Output Linear DC Power Supply with Digital LED screen, 18V DC, 5 Amp removeGW Instek GPR-0830HD Series GPR-H Single Output Linear DC Power Supply with LED Display, 30 Output Amps, 8 Output Volts, 240 Output Watts removeGW Instek GPD-2303S 180W Dual-Output Programmable Linear DC Power Supply, 30V DC, 3 Amp removeGW Instek GPR-1810HD Single Output Linear DC Power Supply with LED Display, Low Power Demands, 180W, 0-18V, 0-10A removeInstek GPS-4303 200W Quadruple-Output Linear DC Power Supply, 30V DC, 3 Amp remove
Image
SKUN_GW Instek PST-3202GPN_GW Instek GPS-1850DN_GW Instek GPR-0830HDN_GW Instek GPD-2303SN_GW Instek GPR-1810HDN_GW Instek GPS-4303
Rating
PriceAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for Quote
Stock
Availability
Add to cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Description
  • Digitized Programmable Interface, High Resolution 10mV, 1mA
  • 192 * 128 LCD Display, Display Several Setting and Measuring Result Simultaneously (Variable Display Mode)
  • Intelligent Windows Operating Interface
  • Support Several Directly Buttons
  • Provided Auto Series and Parallel Function
  • High Stability, Low Drift
  • Over-Voltage, Over-Current, Over-Temperature Protection
  • Intelligent Fan Control (Change by Output Power)
  • Built-in Buzzer Alarm
  • 100 Sets Memory for Setting Save, Auto Running
  • Interface (Standard) RS-232
  • Interface (Option) GPIB (IEEE 488.2)
90W DC Linear Power Supply 0-18V, 0-5A DIGITAL 0-5A DIGITAL Light and Compact Design 0.01% High Regulation Constant Voltage and Constant Current Operation Remote Control for External Programmability Internal Select for Continuous or Dynamic Load Low Ripple and Noise Overload and Reverse Polarity Protection Series or Parallel Operation240W DC Linear Power Supply 0-8V, 0-30A 0-8V, 0-30A 0.01% High Regulation Constant Voltage and Constant Current Operation Internal Select for Continuous or Dynamic Load Low Ripple and Noise Overload and Reverse Polarity Protection 3 1/2 Digit 0.5" LED Display180W, 2ch Output DC Programmable Power Supply 4 Outputs for GPD-4303S High Resolution Display 1mV / 1mA (GPD-X303S) CH1/CH2 Output: 30V / 3A CH3 Selectable Output: 5V/3A ; 5.001V-10V /1A (GPD-4303S) CH4 Output: 5V / 1A (GPD-4303S) Auto Series / Parallel Tracking Mode Digital Panel ControlRotary Encoder Switch and Rubber Key with Backlight 4 Sets SAVE / RECALL panel setting User Friendly Operation, Coarse and Fine Voltage Control Warning Buzzer Output On / Off Switch USB Device for Remote Control (Baud Rate 115200 bps Maximum) Free downloadable PC software Smart Cooling Fan with Low Noise Safety Design: Reverse Polarity, Overload Protection180W DC Linear Power Supply 0-18V, 0-10A DIGITAL 0.01% High Resolution Constant Voltage and Constant Current Operation Internal Select for Continuous or Dynamic Load Low Ripple and Noise Overload and Reverse Polarity Protection 3½ Digit 0.5" LED Displays Showing Voltage and Current
Content

Instek PST-3202GP Programmable DC Power Supply with GPIB, 0-32V/0-2Ax2; 0-6V/0-5Ax1

  • An overall digitalization of programmable interface with high resolution
  • The 192×128 LCD Display can appear multiple settings and measurement results simultaneously (The display mode is changeable)
  • Intuitional, intelligent interface window display is convenient for user to operate the instrument
  • High stability and low draft
  • The function of over voltage/current/temperature protection
  • Intelligent control fan (Vary with different output power.
PST-Series Programmable Power Supply is controlled by Micro Processor Unit (MPU) that can easily connect communication interface RS-232 or GPIB to computer in order to satisfy users’ demand for auto-testing and auto-control. The voltage and current are completely controlled by 12 bits D/A Converter with higher resolution and accuracy. Also, the digitalization of system makes a speedy, precise and convenient input of information controlled by keyboard. The adjustment of voltage/current is made by software calibration without manual error that will increase the preciseness of the instrument. The function of Over Voltage Protection (OVP) and Over Current Protection (OCP) is set with software and detected with hardware to achieve protected function precisely and speedily in order to secure users from danger by using the instrument. The PST series are 3-channel, 96 or 158W, programmable linear DC power supplies. High resolution, maintained at 10mV, 1mA ( 3A). OVP, OCP, and OTP, protects the PST-Series and its loads from unexpected conditions. The PST Series are capable of independent, series, or parallel operation for increased flexibility. The large LCD display conveniently displays all outputs and configurations simultaneously to simplify operation. The programmable interface allows automatic stepping, 100 set of memory, and comprehensive timing operations. GPIB and RS232C interfaces, Labview driver,s and SCPI compatibility allow easy ATE software development and remote control. The versatile PST-Series is ideal for high resolution, multiple output, and automated operations such as production testing and rack mounting systems. Other Features
  • Warning signal by the built-in Buzzer.
  • Step by step calibration procedure.
  • Brand new panel design and the 1/2 rack size reduction volume design.
  • Wheel knob of Fine and Coarse.
  • 100 groups storage space setting.
  • Parallel and series operation modes.
  • IEEE-488.2 and SCPI compatible command setting.
  • 0.1 sec timer for output working loop (Auto step running)
  • Correspond to CE safety regulation.

Manufacturer Specs

Tech Specs

Weight151515151515
Dimensions18 × 12 × 10 in18 × 12 × 10 in18 × 12 × 10 in18 × 12 × 10 in18 × 12 × 10 in18 × 12 × 10 in
Additional information
Weight 15 lbs
Dimensions 18 × 12 × 10 in
Weight 15 lbs
Dimensions 18 × 12 × 10 in
Weight 15 lbs
Dimensions 18 × 12 × 10 in
Weight 15 lbs
Dimensions 18 × 12 × 10 in
Weight 15 lbs
Dimensions 18 × 12 × 10 in
Weight 15 lbs
Dimensions 18 × 12 × 10 in