In Stock

GW Instek GPM-8310 with opt DA4 Digital AC Power Meter with LAN/GPIB up to 100KHz

Available for Quote

Key Features

 5” TFT LCD
 DC, 0.1Hz ~ 100kHz voltage/current test bandwidth
 Two numerical display modes
 General mode: displays 2 main test items + 8 secondary test items
 Simple mode: displays the test values of 4 main test items
 Waveform display: V (voltage), I (current), P (power)
 The current/voltage can be measured to a deformed wave with CF of 3,
and the half-range CF can reach 6 or 6A
 50th order of harmonic measurement and analysis (value and bar
graph)
 Integration function supports automatic level-changing
 External current sensor input terminals (EXT1/EXT2)
 Standard interfaces: RS-232C, USB device/ host, LAN, GPIB
 Optional interface: Digital I/O (DA4) (must be installed before leaving the
factory)
 Optional accessory: GPM-001

View List
SKU: N_GW Instek GPM-8310-DA4 Category: Tag:

Quick Comparison

SettingsGW Instek GPM-8310 with opt DA4 Digital AC Power Meter with LAN/GPIB up to 100KHz removeGW Instek SFG-1003 DDS Function Generator with 6 Digit LED Display, 0.1Hz to 3MHz Frequency removeGW Instek GPD-2303S 180W Dual-Output Programmable Linear DC Power Supply, 30V DC, 3 Amp removeGW Instek GPR-11H30D Single Output Linear DC Power Supply with LED Display, 0-110V 0-3A Power Supply removeGW Instek GPR-30H10D Single Output Linear DC Power Supply with LED Display, 0-300V 0-1A removeInstek GPD-3303S 195W Triple-Output Programmable Linear DC Power Supply, 30V DC, 3 Amp, 1mV, 1-milliamp Resolution remove
Image
SKUN_GW Instek GPM-8310-DA4N_GW Instek SFG-1003N_GW Instek GPD-2303SN_GW Instek GPR-11H30DN_GW Instek GPR-30H10DN_GW Instek GPD-3303S
Rating
PriceAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for Quote
Stock
Availability
Add to cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

DescriptionKey Features  5” TFT LCD  DC, 0.1Hz ~ 100kHz voltage/current test bandwidth  Two numerical display modes  General mode: displays 2 main test items + 8 secondary test items  Simple mode: displays the test values of 4 main test items  Waveform display: V (voltage), I (current), P (power)  The current/voltage can be measured to a deformed wave with CF of 3, and the half-range CF can reach 6 or 6A  50th order of harmonic measurement and analysis (value and bar graph)  Integration function supports automatic level-changing  External current sensor input terminals (EXT1/EXT2)  Standard interfaces: RS-232C, USB device/ host, LAN, GPIB  Optional interface: Digital I/O (DA4) (must be installed before leaving the factory)  Optional accessory: GPM-001SFG-1000 Series, an economic function generator with high accuracy and high stability output, is designed based on the DDS (Direct Digital Synthesis) technology embedded in a large scale FPGA. The frequency range of 3MHz and the output waveform selection as Sine, Square, Triangle and TTL of SFG-1000 Series adequately provide the fundamental features to ensure high confidence for the test results. The DDS technology at an affordable price gives a high-value solution to the users who need a signal source for accurate but unsophisticated measurement applications.180W, 2ch Output DC Programmable Power Supply 4 Outputs for GPD-4303S High Resolution Display 1mV / 1mA (GPD-X303S) CH1/CH2 Output: 30V / 3A CH3 Selectable Output: 5V/3A ; 5.001V-10V /1A (GPD-4303S) CH4 Output: 5V / 1A (GPD-4303S) Auto Series / Parallel Tracking Mode Digital Panel ControlRotary Encoder Switch and Rubber Key with Backlight 4 Sets SAVE / RECALL panel setting User Friendly Operation, Coarse and Fine Voltage Control Warning Buzzer Output On / Off Switch USB Device for Remote Control (Baud Rate 115200 bps Maximum) Free downloadable PC software Smart Cooling Fan with Low Noise Safety Design: Reverse Polarity, Overload Protection330W DC Linear Power Supply 0-110V, 0-3A 0-110V, 0-3A 0.01% High Regulation Constant Voltage and Constant Current Operation Internal Select for Continuous or Dynamic Load Low Ripple and Noise Overload and Reverse Polarity Protection 3 1/2 Digit 0.5" LED Display300W DC Linear Power Supply 0-300V, 0-1A 0-300V, 0-1A 0.01% High Regulation Constant Voltage and Constant Current Operation Internal Select for Continuous or Dynamic Load Low Ripple and Noise Overload and Reverse Polarity Protection 3 1/2 Digit 0.5" LED Display0-30Vx2,0-3Ax2; 2.5V/3.3V/5V,3A, USB; 4 3/4 digit Three Independent Output : 30V/3A x 2, 2.5V/3.3V/5V/3A x 1 4 LED Display Sets : 3 Digits After Decimal Point Minimum Resolution : 1mV/1mA Digital Panel Control (Rotary Encoder Switch, Rubber Key With Indicator) Key-Lock User-Friendly Operation, Coarse/Fine Voltage Control 4 Panel Settings Save/Recall (Plus Factory Settings Recall) Output ON/OFF Tracking Series and Parallel Mode USB Device for Remote Control (Baud Rate 115200 bps Maximum) Free downloadable PC software Smart Cooling Fan Achieving Low Noise Warning Buzzer Light-Weight and Compact Design
Content
Weight22615151518
Dimensions12 × 14 × 6 in15 × 12 × 6 in18 × 12 × 10 in18 × 12 × 10 in18 × 12 × 10 in18 × 12 × 10 in
Additional information
Weight 22 lbs
Dimensions 12 × 14 × 6 in
Weight 6 lbs
Dimensions 15 × 12 × 6 in
Weight 15 lbs
Dimensions 18 × 12 × 10 in
Weight 15 lbs
Dimensions 18 × 12 × 10 in
Weight 15 lbs
Dimensions 18 × 12 × 10 in
Weight 18 lbs
Dimensions 18 × 12 × 10 in