In Stock

GW Instek GPM-8310 with opt DA4 Digital AC Power Meter with LAN/GPIB up to 100KHz

Available for Quote

Key Features

 5” TFT LCD
 DC, 0.1Hz ~ 100kHz voltage/current test bandwidth
 Two numerical display modes
 General mode: displays 2 main test items + 8 secondary test items
 Simple mode: displays the test values of 4 main test items
 Waveform display: V (voltage), I (current), P (power)
 The current/voltage can be measured to a deformed wave with CF of 3,
and the half-range CF can reach 6 or 6A
 50th order of harmonic measurement and analysis (value and bar
graph)
 Integration function supports automatic level-changing
 External current sensor input terminals (EXT1/EXT2)
 Standard interfaces: RS-232C, USB device/ host, LAN, GPIB
 Optional interface: Digital I/O (DA4) (must be installed before leaving the
factory)
 Optional accessory: GPM-001

View List
SKU: N_GW Instek GPM-8310-DA4 Category: Tag:

Quick Comparison

SettingsGW Instek GPM-8310 with opt DA4 Digital AC Power Meter with LAN/GPIB up to 100KHz removeInstek GPS-4303 200W Quadruple-Output Linear DC Power Supply, 30V DC, 3 Amp removeGW Instek PLR 20-36 DC Power Supply, 20V, 36A, 720W Low Noise removeGW Instek GPR-0830HD Series GPR-H Single Output Linear DC Power Supply with LED Display, 30 Output Amps, 8 Output Volts, 240 Output Watts removeGW Instek GPR-1820HD Series GPR-H Single Output Linear DC Power Supply with LED Display, 0-18V 0-20A, 360W removeGW Instek GPS-3030D High-Current, Single-Output DC Power Supply, 0 to 30 VDC, 0 to 3 A, 90W remove
Image
SKUN_GW Instek GPM-8310-DA4N_GW Instek GPS-4303N_GW Instek PLR 20-36N_GW Instek GPR-0830HDN_GW Instek GPR-1820HDN_GW Instek GPS-3030D
Rating
PriceAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for Quote
Stock
Availability
Add to cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

DescriptionKey Features  5” TFT LCD  DC, 0.1Hz ~ 100kHz voltage/current test bandwidth  Two numerical display modes  General mode: displays 2 main test items + 8 secondary test items  Simple mode: displays the test values of 4 main test items  Waveform display: V (voltage), I (current), P (power)  The current/voltage can be measured to a deformed wave with CF of 3, and the half-range CF can reach 6 or 6A  50th order of harmonic measurement and analysis (value and bar graph)  Integration function supports automatic level-changing  External current sensor input terminals (EXT1/EXT2)  Standard interfaces: RS-232C, USB device/ host, LAN, GPIB  Optional interface: Digital I/O (DA4) (must be installed before leaving the factory)  Optional accessory: GPM-001

Hybrid Linear, Low noise, 0-20V/0-36A, 720W

  • Output Voltage Rating: 20V
  • Output Power: 720W
  • Low Ripple and Noise (0.5mVrms/ 10mArms)
  • Fast transition recovery time (100us)
  • Maximum 2 units in series connections or 3 units in parallel connections
  • Select the setting digits for voltage and current (coarse/ fine volume control)
  • Panel Lock Function
  • 3 set of preset function
  • Output off timer function (Range: 1min to 1000hours & 59mins)
  • CC priority function (prevent overshoot & inrush current)
  • Sequence function of PC editing (Max.: 1000 steps/ Min. step period: 50ms)
  • Protection: OVP, UVP, OCP, remote sensing (Terminal open)
  • External Analog Control Function
  • PC Remote Interface (Standard): RS-232; (Optional): GPIB / USB / LAN
  • CE Compliance
240W DC Linear Power Supply 0-8V, 0-30A 0-8V, 0-30A 0.01% High Regulation Constant Voltage and Constant Current Operation Internal Select for Continuous or Dynamic Load Low Ripple and Noise Overload and Reverse Polarity Protection 3 1/2 Digit 0.5" LED Display360W DC Linear Power Supply 0-18V, 0-20A 0-18V, 0-20A 0.01% High Regulation Constant Voltage and Constant Current Operation Internal Select for Continuous or Dynamic Load Low Ripple and Noise Overload and Reverse Polarity Protection 3 1/2 Digit 0.5" LED Display

90W DC Linear Power Supply 0-30V, 0-3A DIGITAL Display

  • 0-3A DIGITAL
  • Light and Compact Design
  • 0.01% High Regulation
  • Constant Voltage and Constant Current Operation
  • Remote Control for External Programmability
  • Internal Select for Continuous or Dynamic Load
  • Low Ripple and Noise
  • Overload and Reverse Polarity Protection
  • Series or Parallel Operation
Content
Weight221515151515
Dimensions12 × 14 × 6 in18 × 12 × 10 in18 × 12 × 10 in18 × 12 × 10 in18 × 12 × 10 in18 × 12 × 10 in
Additional information
Weight 22 lbs
Dimensions 12 × 14 × 6 in
Weight 15 lbs
Dimensions 18 × 12 × 10 in
Weight 15 lbs
Dimensions 18 × 12 × 10 in
Weight 15 lbs
Dimensions 18 × 12 × 10 in
Weight 15 lbs
Dimensions 18 × 12 × 10 in
Weight 15 lbs
Dimensions 18 × 12 × 10 in