In Stock

GW Instek GPM-8310 with opt DA4 Digital AC Power Meter with LAN/GPIB up to 100KHz

Available for Quote

Key Features

 5” TFT LCD
 DC, 0.1Hz ~ 100kHz voltage/current test bandwidth
 Two numerical display modes
 General mode: displays 2 main test items + 8 secondary test items
 Simple mode: displays the test values of 4 main test items
 Waveform display: V (voltage), I (current), P (power)
 The current/voltage can be measured to a deformed wave with CF of 3,
and the half-range CF can reach 6 or 6A
 50th order of harmonic measurement and analysis (value and bar
graph)
 Integration function supports automatic level-changing
 External current sensor input terminals (EXT1/EXT2)
 Standard interfaces: RS-232C, USB device/ host, LAN, GPIB
 Optional interface: Digital I/O (DA4) (must be installed before leaving the
factory)
 Optional accessory: GPM-001

View List
SKU: N_GW Instek GPM-8310-DA4 Category: Tag:

Quick Comparison

SettingsGW Instek GPM-8310 with opt DA4 Digital AC Power Meter with LAN/GPIB up to 100KHz removeGW Instek GPE-1326 Multi-Output DC Power Supply, Single Channel, 192W, 0-32 VDC, 0-6A removeGW Instek PLR 20-18 DC Power Supply, 20V, 18A, 360W Low Noise removeGW Instek GPR-3510HD Single Output Linear DC Power Supply with LED Display, 10 Output Amps, 35 Output Volts, 350 Output Watts removeGW Instek GPD-3303D 195W Triple-Output Programmable Linear DC Power Supply 30V , 3 A, 100mV, 10-milliamp Resolution removeInstek GPD-3303S 195W Triple-Output Programmable Linear DC Power Supply, 30V DC, 3 Amp, 1mV, 1-milliamp Resolution remove
Image
SKUN_GW Instek GPM-8310-DA4N_GW Instek GPE-1326N_GW Instek PLR 20-18N_GW Instek GPR-3510HDN_GW Instek GPC-3030DN_GW Instek GPD-3303S
Rating
PriceAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for Quote
Stock
Availability
Add to cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

DescriptionKey Features  5” TFT LCD  DC, 0.1Hz ~ 100kHz voltage/current test bandwidth  Two numerical display modes  General mode: displays 2 main test items + 8 secondary test items  Simple mode: displays the test values of 4 main test items  Waveform display: V (voltage), I (current), P (power)  The current/voltage can be measured to a deformed wave with CF of 3, and the half-range CF can reach 6 or 6A  50th order of harmonic measurement and analysis (value and bar graph)  Integration function supports automatic level-changing  External current sensor input terminals (EXT1/EXT2)  Standard interfaces: RS-232C, USB device/ host, LAN, GPIB  Optional interface: Digital I/O (DA4) (must be installed before leaving the factory)  Optional accessory: GPM-001192W Single Channel DC Power Supply GPE-1326 Single Channel, 192W Linear DC Power Supply 1 Independent Isolated Output 10mv min resolution 1ma min resolution 4.3 Inch LCD Display Setting & Read back Resolution 10mA / 1mA Output ON/OFF Analog Control (Remote I/O) for Output ON / OFF Set View function for checking an original V / I setting during output on Key Lock Function Tracking series and parallel operation Smart cooling fan achieving low noise Optional European Jack Type Terminal

Hybrid Linear, Low noise, 0-20V/0-18A, 360W

  • Output Voltage Rating: 20V
  • Output Power: 360W
  • Low Ripple and Noise (0.5mVrms/ 10mArms)
  • Fast transition recovery time (100us)
  • Maximum 2 units in series connections or 3 units in parallel connections
  • Select the setting digits for voltage and current (coarse/ fine volume control)
  • Panel Lock Function
  • 3 set of preset function
  • Output off timer function (Range: 1min to 1000hours & 59mins)
  • CC priority function (prevent overshoot & inrush current)
  • Sequence function of PC editing (Max.: 1000 steps/ Min. step period: 50ms)
  • Protection: OVP, UVP, OCP, remote sensing (Terminal open)
  • External Analog Control Function
  • PC Remote Interface (Standard): RS-232; (Optional): GPIB / USB / LAN
  • CE Compliance
350W DC Linear Power Supply 0-35V, 0-10A 0-35V, 0-10A 0.01% High Regulation Constant Voltage and Constant Current Operation Internal Select for Continuous or Dynamic Load Low Ripple and Noise Overload and Reverse Polarity Protection 3 1/2 Digit 0.5" LED Display0-30Vx2,0-3Ax2; 2.5V/3.3V/5V,3A, USB; 2 3/4 digit Three Independent Output : 30V/3A x 2, 2.5V/3.3V/5V/3A x 1 4 LED Display Sets : 3 Digits After Decimal Point Minimum Resolution : 100mV/10mA Digital Panel Control (Rotary Encoder Switch, Rubber Key With Indicator) Key-Lock User-Friendly Operation, Coarse/Fine Voltage Control 4 Panel Settings Save/Recall (Plus Factory Settings Recall) Output ON/OFF Tracking Series and Parallel Mode USB Device for Remote Control (Baud Rate 115200 bps Maximum) Free downloadable PC software Smart Cooling Fan Achieving Low Noise Warning Buzzer Light-Weight and Compact Design0-30Vx2,0-3Ax2; 2.5V/3.3V/5V,3A, USB; 4 3/4 digit Three Independent Output : 30V/3A x 2, 2.5V/3.3V/5V/3A x 1 4 LED Display Sets : 3 Digits After Decimal Point Minimum Resolution : 1mV/1mA Digital Panel Control (Rotary Encoder Switch, Rubber Key With Indicator) Key-Lock User-Friendly Operation, Coarse/Fine Voltage Control 4 Panel Settings Save/Recall (Plus Factory Settings Recall) Output ON/OFF Tracking Series and Parallel Mode USB Device for Remote Control (Baud Rate 115200 bps Maximum) Free downloadable PC software Smart Cooling Fan Achieving Low Noise Warning Buzzer Light-Weight and Compact Design
Content
Weight221515151518
Dimensions12 × 14 × 6 in20 × 15 × 11 in18 × 12 × 10 in18 × 12 × 10 in18 × 12 × 10 in18 × 12 × 10 in
Additional information
Weight 22 lbs
Dimensions 12 × 14 × 6 in
Weight 15 lbs
Dimensions 20 × 15 × 11 in
Weight 15 lbs
Dimensions 18 × 12 × 10 in
Weight 15 lbs
Dimensions 18 × 12 × 10 in
Weight 15 lbs
Dimensions 18 × 12 × 10 in
Weight 18 lbs
Dimensions 18 × 12 × 10 in