In Stock

GW Instek LCR-916 Handheld LCR Meter, 100/120Hz/1/10/100kHz Selectable Test Frequency

Available for Quote

The LCR-916 is a smart, convenient and fully-functional dual display handheld LCR meter. The test frequency extends as high as 10 kHz, providing greater flexibility to test a wider range of components.The LCR-916 uses a dual 20,000/2000 count display.

View List
SKU: N_GW Instek LCR-916 Category: Tag:

Quick Comparison

SettingsGW Instek LCR-916 Handheld LCR Meter, 100/120Hz/1/10/100kHz Selectable Test Frequency removeGW Instek GPE-2323 GPE-X323 Multi-Output DC Power Supply, 2 Channel, 192W, 0-32 VDC, 0-3A, Series/Parallel removeGW Instek SFG-1003 DDS Function Generator with 6 Digit LED Display, 0.1Hz to 3MHz Frequency removeInstek GPD-4303S 200W Quadruple-Output Programmable Linear DC Power Supply, 30V DC, 3 Amp, 1mV, 1-milliamp Resolution removeGW Instek GPR-1820HD Series GPR-H Single Output Linear DC Power Supply with LED Display, 0-18V 0-20A, 360W removeInstek PSU-03B Bus Bar for 4 units in parallel operation remove
Image
SKUN_GW Instek LCR-916N_GW Instek GPE-2323N_GW Instek SFG-1003N_GW Instek GPD-4303SN_GW Instek GPR-1820HDN_GW Instek PSU-03B
Rating
PriceAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for Quote
Stock
Availability
Add to cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

DescriptionThe LCR-916 is a smart, convenient and fully-functional dual display handheld LCR meter. The test frequency extends as high as 10 kHz, providing greater flexibility to test a wider range of components.The LCR-916 uses a dual 20,000/2000 count display.192W Two Channel DC Power Supply GPE-2323 2 Channels, 192W Linear DC Power Supply 2 Independent Isolated Output 10mv min resolution 1ma min resolution 4.3 Inch LCD Display Setting & Read back Resolution 10mA / 1mA Output ON/OFF Analog Control (Remote I/O) for Output ON / OFF Set View function for checking an original V / I setting during output on Key Lock Function Tracking series and parallel operation Smart cooling fan achieving low noise Optional European Jack Type TerminalSFG-1000 Series, an economic function generator with high accuracy and high stability output, is designed based on the DDS (Direct Digital Synthesis) technology embedded in a large scale FPGA. The frequency range of 3MHz and the output waveform selection as Sine, Square, Triangle and TTL of SFG-1000 Series adequately provide the fundamental features to ensure high confidence for the test results. The DDS technology at an affordable price gives a high-value solution to the users who need a signal source for accurate but unsophisticated measurement applications.195W, 4ch Output DC Programmable Power Supply 4 Outputs for GPD-4303S High Resolution Display 1mV / 1mA (GPD-X303S) CH1/CH2 Output: 30V / 3A CH3 Selectable Output: 5V/3A ; 5.001V-10V /1A (GPD-4303S) CH4 Output: 5V / 1A (GPD-4303S) Auto Series / Parallel Tracking Mode Digital Panel ControlRotary Encoder Switch and Rubber Key with Backlight 4 Sets SAVE / RECALL panel setting User Friendly Operation, Coarse and Fine Voltage Control Warring Buzzer Output On / Off Switch USB Device for Remote Control (Baud Rate 115200 bps Maximum) Free downloadable PC software Smart Cooling Fan with Low Noise Safety Design: Reverse Polarity, Overload Protection360W DC Linear Power Supply 0-18V, 0-20A 0-18V, 0-20A 0.01% High Regulation Constant Voltage and Constant Current Operation Internal Select for Continuous or Dynamic Load Low Ripple and Noise Overload and Reverse Polarity Protection 3 1/2 Digit 0.5" LED Display
Content
Weight315618152
Dimensions8 × 10 × 6 in18 × 12 × 10 in15 × 12 × 6 in22 × 15 × 12 in18 × 12 × 10 in4 × 6 × 2 in
Additional information
Weight 3 lbs
Dimensions 8 × 10 × 6 in
Weight 15 lbs
Dimensions 18 × 12 × 10 in
Weight 6 lbs
Dimensions 15 × 12 × 6 in
Weight 18 lbs
Dimensions 22 × 15 × 12 in
Weight 15 lbs
Dimensions 18 × 12 × 10 in
Weight 2 lbs
Dimensions 4 × 6 × 2 in