| Description | The LCR-8000G Series LCR meter, with test frequency up to 10MHz, provides accuracy, versatility and high resolution for a wide range of component measurements, even including DC resistance measurement and Voltage/Current monitoring. The Multi-Step function allows on-screen programming of customized measurement sequence with Pass/Fail indication. Each program includes 30 test steps and each test step can be set with selected parameters and test limits. Under Multi-Step operation, a tedious work routine can be done step by step automatically just at a press of a button. With Graph Mode, LCR-8110G, LCR-8105G and LCR-8101G display the component impedance response either over a wide range of test frequency sweep or over a wide range of test voltage sweep in a graph chart. This gives an analysis result of either impedance vs. frequency or impedance vs. applied voltage all at a glance. GPIB and RS-232C interfaces are available as standard for instrument control and test result display on the PC. The rich features of LCR-8000G Series easily make your measurement tasks done at a very competitive price. | | SFG-1000 Series, an economic function generator with high accuracy and high stability output, is designed based on the DDS (Direct Digital Synthesis) technology embedded in a large scale FPGA. The frequency range of 3MHz and the output waveform selection as Sine, Square, Triangle and TTL of SFG-1000 Series adequately provide the fundamental features to ensure high confidence for the test results. The DDS technology at an affordable price gives a high-value solution to the users who need a signal source for accurate but unsophisticated measurement applications. | 0-30Vx2,0-3Ax2; 2.5V/3.3V/5V,3A, USB; 2 3/4 digit
Three Independent Output : 30V/3A x 2, 2.5V/3.3V/5V/3A x 1
4 LED Display Sets : 3 Digits After Decimal Point
Minimum Resolution : 100mV/10mA
Digital Panel Control (Rotary Encoder Switch, Rubber Key With Indicator)
Key-Lock
User-Friendly Operation, Coarse/Fine Voltage Control
4 Panel Settings Save/Recall (Plus Factory Settings Recall)
Output ON/OFF
Tracking Series and Parallel Mode
USB Device for Remote Control (Baud Rate 115200 bps Maximum)
Free downloadable PC software
Smart Cooling Fan Achieving Low Noise
Warning Buzzer
Light-Weight and Compact Design | | 180W, 2ch Output DC Programmable Power Supply
4 Outputs for GPD-4303S
High Resolution Display 1mV / 1mA (GPD-X303S)
CH1/CH2 Output: 30V / 3A
CH3 Selectable Output: 5V/3A ; 5.001V-10V /1A (GPD-4303S)
CH4 Output: 5V / 1A (GPD-4303S)
Auto Series / Parallel Tracking Mode
Digital Panel ControlRotary Encoder Switch and Rubber Key with Backlight
4 Sets SAVE / RECALL panel setting
User Friendly Operation, Coarse and Fine Voltage Control
Warning Buzzer
Output On / Off Switch
USB Device for Remote Control (Baud Rate 115200 bps Maximum)
Free downloadable PC software
Smart Cooling Fan with Low Noise
Safety Design: Reverse Polarity, Overload Protection |
| Additional information |
| Weight |
2 lbs |
| Dimensions |
8 × 10 × 6 in |
|
| Weight |
2 lbs |
| Dimensions |
4 × 6 × 2 in |
|
| Weight |
6 lbs |
| Dimensions |
15 × 12 × 6 in |
|
| Weight |
15 lbs |
| Dimensions |
18 × 12 × 10 in |
|
| Weight |
15 lbs |
| Dimensions |
18 × 12 × 10 in |
|
| Weight |
15 lbs |
| Dimensions |
18 × 12 × 10 in |
|
