In Stock

GW Instek LCR-8105G Precision LCR Meter with RS-232/GPIB Interface, 5 MHz Test Frequency

Available for Quote

The LCR-8000G Series LCR meter, with test frequency up to 10MHz, provides accuracy, versatility and high resolution for a wide range of component measurements, even including DC resistance measurement and Voltage/Current monitoring. The Multi-Step function allows on-screen programming of customized measurement sequence with Pass/Fail indication. Each program includes 30 test steps and each test step can be set with selected parameters and test limits. Under Multi-Step operation, a tedious work routine can be done step by step automatically just at a press of a button. With Graph Mode, LCR-8110G, LCR-8105G and LCR-8101G display the component impedance response either over a wide range of test frequency sweep or over a wide range of test voltage sweep in a graph chart. This gives an analysis result of either impedance vs. frequency or impedance vs. applied voltage all at a glance. GPIB and RS-232C interfaces are available as standard for instrument control and test result display on the PC. The rich features of LCR-8000G Series easily make your measurement tasks done at a very competitive price.

View List
SKU: N_GW Instek LCR-8105G Category: Tag:

Quick Comparison

SettingsGW Instek LCR-8105G Precision LCR Meter with RS-232/GPIB Interface, 5 MHz Test Frequency removeGW Instek GPR-7550D Single Output Linear DC Power Supply with LED Display, 5 Output Amps, 75 Output Volts, 375 Output Watts removeInstek PLR 36-10 DC Power Supply, 36V, 10A, 360W Low Noise removeInstek PSU-03B Bus Bar for 4 units in parallel operation removeGW Instek GPR-3510HD Single Output Linear DC Power Supply with LED Display, 10 Output Amps, 35 Output Volts, 350 Output Watts removeGW Instek GPS-3030D High-Current, Single-Output DC Power Supply, 0 to 30 VDC, 0 to 3 A, 90W remove
Image
SKUN_GW Instek LCR-8105GN_GW Instek GPR-7550DN_GW Instek PLR 36-10N_GW Instek PSU-03BN_GW Instek GPR-3510HDN_GW Instek GPS-3030D
Rating
PriceAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for Quote
Stock
Availability
Add to cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

DescriptionThe LCR-8000G Series LCR meter, with test frequency up to 10MHz, provides accuracy, versatility and high resolution for a wide range of component measurements, even including DC resistance measurement and Voltage/Current monitoring. The Multi-Step function allows on-screen programming of customized measurement sequence with Pass/Fail indication. Each program includes 30 test steps and each test step can be set with selected parameters and test limits. Under Multi-Step operation, a tedious work routine can be done step by step automatically just at a press of a button. With Graph Mode, LCR-8110G, LCR-8105G and LCR-8101G display the component impedance response either over a wide range of test frequency sweep or over a wide range of test voltage sweep in a graph chart. This gives an analysis result of either impedance vs. frequency or impedance vs. applied voltage all at a glance. GPIB and RS-232C interfaces are available as standard for instrument control and test result display on the PC. The rich features of LCR-8000G Series easily make your measurement tasks done at a very competitive price.375W DC Linear Power Supply 0-75V, 0-5A 0-75V, 0-5A 0.01% High Regulation Constant Voltage and Constant Current Operation Internal Select for Continuous or Dynamic Load Low Ripple and Noise Overload and Reverse Polarity Protection 3 1/2 Digit 0.5" LED Display

Hybrid Linear, Low noise, 0-36V/0-10A, 360W

  • Output Voltage Rating: 36V
  • Output Power: 360W
  • Low Ripple and Noise (0.5mVrms/ 10mArms)
  • Fast transition recovery time (100us)
  • Maximum 2 units in series connections or 3 units in parallel connections
  • Select the setting digits for voltage and current (coarse/ fine volume control)
  • Panel Lock Function
  • 3 set of preset function
  • Output off timer function (Range: 1min to 1000hours & 59mins)
  • CC priority function (prevent overshoot & inrush current)
  • Sequence function of PC editing (Max.: 1000 steps/ Min. step period: 50ms)
  • Protection: OVP, UVP, OCP, remote sensing (Terminal open)
  • External Analog Control Function
  • PC Remote Interface (Standard): RS-232; (Optional): GPIB / USB / LAN
  • CE Compliance
350W DC Linear Power Supply 0-35V, 0-10A 0-35V, 0-10A 0.01% High Regulation Constant Voltage and Constant Current Operation Internal Select for Continuous or Dynamic Load Low Ripple and Noise Overload and Reverse Polarity Protection 3 1/2 Digit 0.5" LED Display

90W DC Linear Power Supply 0-30V, 0-3A DIGITAL Display

  • 0-3A DIGITAL
  • Light and Compact Design
  • 0.01% High Regulation
  • Constant Voltage and Constant Current Operation
  • Remote Control for External Programmability
  • Internal Select for Continuous or Dynamic Load
  • Low Ripple and Noise
  • Overload and Reverse Polarity Protection
  • Series or Parallel Operation
Content
Weight2151521515
Dimensions8 × 10 × 6 in18 × 12 × 10 in18 × 12 × 10 in4 × 6 × 2 in18 × 12 × 10 in18 × 12 × 10 in
Additional information
Weight 2 lbs
Dimensions 8 × 10 × 6 in
Weight 15 lbs
Dimensions 18 × 12 × 10 in
Weight 15 lbs
Dimensions 18 × 12 × 10 in
Weight 2 lbs
Dimensions 4 × 6 × 2 in
Weight 15 lbs
Dimensions 18 × 12 × 10 in
Weight 15 lbs
Dimensions 18 × 12 × 10 in