In Stock

Instek GCT-9040 AC Ground Bond Tester

Available for Quote

View List
Add to wishlist
SKU: N_GW Instek GCT-9040 Category: Tag:

Description

GW Instek rolls out40AAC ground bond tester ? GCT-9040 to augment the existing safety tester product line and to replace the legacy model GCT-630. GCT-9040 provides the maximum AC test current of40Aand adopts the PWM design the same as other models to ensure test efficiency and reliability. Furthermore, large LCD display, 100 memory blocks from setting criteria, and programmable communications interface together deliver users with higher readability and convenience.

Quick Comparison

SettingsInstek GCT-9040 AC Ground Bond Tester removeAmprobe LM-120 Light Meter removeAmprobe CT-500 1000A Flexible Current Sensor for DM-5 removeAmprobe TACH-10 Tachometer with Contact and Non-Contact Measurement removeAmprobe PRM-6 Phase Sequence and Motor Rotation Tester removeAmprobe SC-3500 4? Signal Clamp for AT-3500 remove
Image
SKUN_GW Instek GCT-9040N_Amprobe LM-120N_Amprobe CT-500N_Amprobe TACH-10N_Amprobe PRM-6N_Amprobe SC-3500
Rating
PriceAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for Quote
Stock
Availability
Add to cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Description
ContentGW Instek rolls out40AAC ground bond tester ? GCT-9040 to augment the existing safety tester product line and to replace the legacy model GCT-630. GCT-9040 provides the maximum AC test current of40Aand adopts the PWM design the same as other models to ensure test efficiency and reliability. Furthermore, large LCD display, 100 memory blocks from setting criteria, and programmable communications interface together deliver users with higher readability and convenience.The Amprobe LM-120 light meter measures the visible light from fluorescent, metal halide, high-pressure sodium or incandescent sources. It is a portable, easy-to-use digital light meter designed for simple one-hand operation reading in Lumen (lux) or foot candle (fc) units. The LM-120 measures a wide range of light up to 20,000 fc or 200,000 lux with an accurate, high resolution of 0.01 fc/lux. This unit is Auto-ranging plus manual ranging with ability to Zero out the reading before taking a measurement.Amprobe Flex Current Sensor Developed for the Amprobe DM-5, your all-in-one solution for excellent power quality.Universal, economical tachometer measuring rotational or surface speed either in contact or non-contact way. Widely used to measure rotational speed of motors, conveyer belts and other moving or rotating systems.If you install or connect 3-phase motors and systems, you recognize the importance of verifying the correct motor rotation and wiring phase sequence. Improper connections can cause motors to rotate in reverse direction, potentially damaging the motor and the equipment it is powering.The Amprobe SC-3500 4? Signal Clamp for AT-3500 attaches around a buried metallic pipe, cable, or wire to induce a transmitted signal into the feature for active location and tracing. It does not require direct contact with metal to transmit the signal and can transmit signal through insulation on wires and into cable and wire bundles, providing more accurate tracing than locating with just a receiver and transmitter. Accommodates conductors up to 4? in diameter. Transmits a 33 kilohertz (kHz) frequency supplied by the T-3500 Transmitter (included in the AT-3500 kit).
Weight4012112
Dimensions22.8 × 18.5 × 11 in4 × 10 × 2 in10 × 10 × 10 in10.2 × 7 × 3.2 in4 × 10 × 2 in9.84 × 9.84 × 9.84 in
Additional information
Weight 40 lbs
Dimensions 22.8 × 18.5 × 11 in
Weight 1 lbs
Dimensions 4 × 10 × 2 in
Weight 2 lbs
Dimensions 10 × 10 × 10 in
Weight 1 lbs
Dimensions 10.2 × 7 × 3.2 in
Weight 1 lbs
Dimensions 4 × 10 × 2 in
Weight 2 lbs
Dimensions 9.84 × 9.84 × 9.84 in

Related products