Test and Measurement Parts
Available for Quote
GW Instek rolls out40AAC ground bond tester ? GCT-9040 to augment the existing safety tester product line and to replace the legacy model GCT-630. GCT-9040 provides the maximum AC test current of40Aand adopts the PWM design the same as other models to ensure test efficiency and reliability. Furthermore, large LCD display, 100 memory blocks from setting criteria, and programmable communications interface together deliver users with higher readability and convenience.
| Settings | Instek GCT-9040 AC Ground Bond Tester remove | Amprobe SC-3500 4? Signal Clamp for AT-3500 remove | Amprobe AT-6000-T Transmitter remove | Amprobe MLS55-3 Pipe Transmitter for AT-3500 remove | Amprobe AMB-45 Insulation Resistance Tester remove | Amprobe AT-7020 Advanced Wire Tracer Kit remove | ||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Image | |  |  |  |  |  | ||||||||||||||||||||||||
| SKU | N_GW Instek GCT-9040 | N_Amprobe SC-3500 | N_Amprobe AT-6000-T | N_Amprobe MLS55-3 | N_Amprobe AMB-45 | N_Amprobe AT-7020 | ||||||||||||||||||||||||
| Rating | ||||||||||||||||||||||||||||||
| Price | Available for Quote | Available for Quote | Available for Quote | Available for Quote | Available for Quote | Available for Quote | ||||||||||||||||||||||||
| Stock | ||||||||||||||||||||||||||||||
| Availability | ||||||||||||||||||||||||||||||
| Add to cart | ||||||||||||||||||||||||||||||
| Description | ||||||||||||||||||||||||||||||
| Content | GW Instek rolls out40AAC ground bond tester ? GCT-9040 to augment the existing safety tester product line and to replace the legacy model GCT-630. GCT-9040 provides the maximum AC test current of40Aand adopts the PWM design the same as other models to ensure test efficiency and reliability. Furthermore, large LCD display, 100 memory blocks from setting criteria, and programmable communications interface together deliver users with higher readability and convenience. | The Amprobe SC-3500 4? Signal Clamp for AT-3500 attaches around a buried metallic pipe, cable, or wire to induce a transmitted signal into the feature for active location and tracing. It does not require direct contact with metal to transmit the signal and can transmit signal through insulation on wires and into cable and wire bundles, providing more accurate tracing than locating with just a receiver and transmitter. Accommodates conductors up to 4? in diameter. Transmits a 33 kilohertz (kHz) frequency supplied by the T-3500 Transmitter (included in the AT-3500 kit). | The AT-6000-T Transmitter works on Energized and De-energized circuits up to 600 V AC/DC in Category I through Category III electrical environments and features high signal, low signal, and loop modes. The Breaker Identification feature eliminates confusion of multiple false positives, common with older technology tracing tools, by identifying the one correct breaker or fuse with the highest recorded signal. | The Amprobe MLS55-3 Pipe transmitter is an optional accessory for the AT-3500 underground cable locator that allows for pinpointing places in pipes, ducts, etc. It can be inserted to the pipe/duct using standard fish tape or a duct rodder and can accommodate pipes over 2? (5 cm) in diameter. | Test insulation of wires, cables, transformers and electrical motors quickly and easily with this rugged tester. | The AT-7020 Advanced Wire Tracer kit includes the AT-7000-R Receiver and the AT-7000-T Transmitter. The Receiver includes Amprobe?s patented Smart Sensor feature to instantly display the location and orientation of energized wires in walls, floors, and ceilings. You can clearly see the direction of the wire on the large, bright TFT LCD full color display. In hard-to-reach areas, you can use the Receiver?s Tip Sensor to trace wires in corners, tight spaces and junction boxes. The Transmitter offers two automatically-selected frequency modes for optimal tracing on energized and de-energized circuits, and three power modes (high, low, clamp) for a variety of environments. The breaker mode?s Scan and Locate feature identifies the one correct breaker or fuse with the highest recorded signal, thus eliminating the confusion of multiple false positives common with older technology tracing tools. So whether you?re a novice user or an expert, this Amprobe circuit tracer kit will help you get the job done fast. | ||||||||||||||||||||||||
| Weight | 40 | 2 | 1 | 1 | 3 | 5 | ||||||||||||||||||||||||
| Dimensions | 22.8 × 18.5 × 11 in | 9.84 × 9.84 × 9.84 in | 9.5 × 6.5 × 1.75 in | 7.1 × 5.3 × 3.7 in | 12.3 × 7.8 × 4.5 in | 17.3 × 14.3 × 8.8 in | ||||||||||||||||||||||||
| Additional information |
|
|
|
|
|
|
Northern California:
3848 Bay Center Pl
Hayward, CA 94545
Southern California:
12180 Ridgecrest Rd
Suite 314
Victorville, CA 92395
Monday – Friday: 8am – 4:30pm
