In Stock

GWInstek GPT-9513 AC 150VA Multi-Channel Hipot Tester

Available for Quote

150VA Multi-channel Hipot Tester (H or L or X)

  • Multi-channel hipot tester
  • Channel status – H, L or X
  • AC withstanding – 0.05-5kV
  • DC withstanding – 0.05-6kV
  • Insulation resistance – 50-1000V DC / 0.1M – 10G Ω
  • 150VA AC test capacity
  • Built in 8 channel scanner
  • Open / short check (OSC)
  • Arc detection
  • Interface: RS-232C and USB host/device

More Info

View List

Quick Comparison

SettingsGWInstek GPT-9513 AC 150VA Multi-Channel Hipot Tester removeAmprobe LM-120 Light Meter removeAmprobe TMA-21HW Hotwire Anemometer with Temperature removeAmprobe R2000 Receiver For Wire Tracers removeAmprobe SC-3500 4? Signal Clamp for AT-3500 removeAmprobe AT-2004-A Advanced Wire Tracer remove
Image
SKUN_GW Instek GPT-9513N_Amprobe LM-120N_Amprobe TMA-21HWN_Amprobe R2000N_Amprobe SC-3500N_Amprobe AT-2004-A
Rating
PriceAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for Quote
Stock
Availability
Add to cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Description

150VA Multi-channel Hipot Tester (H or L or X)

  • Multi-channel hipot tester
  • Channel status - H, L or X
  • AC withstanding - 0.05-5kV
  • DC withstanding - 0.05-6kV
  • Insulation resistance - 50-1000V DC / 0.1M - 10G Ω
  • 150VA AC test capacity
  • Built in 8 channel scanner
  • Open / short check (OSC)
  • Arc detection
  • Interface: RS-232C and USB host/device
More Info
ContentThe Amprobe LM-120 light meter measures the visible light from fluorescent, metal halide, high-pressure sodium or incandescent sources. It is a portable, easy-to-use digital light meter designed for simple one-hand operation reading in Lumen (lux) or foot candle (fc) units. The LM-120 measures a wide range of light up to 20,000 fc or 200,000 lux with an accurate, high resolution of 0.01 fc/lux. This unit is Auto-ranging plus manual ranging with ability to Zero out the reading before taking a measurement.The Amprobe TMA-21HW Hotwire anemometer technology eliminates the use of bearings and rotating parts. When compared to standard bearing type probes, the compact Amprobe hotwire sensor is more reliable (no mechanical moving parts) and allows for easier access to duct and confined spaces. The Amprobe TMA-21HW Hotwire anemometer measures air flow volume and velocity, it features a telescopic probe for positioning the sensor, and is used by HVAC/R technicians to measure wind flow and temperature in air conditioning systems.Use for Wire Tracer series AT-2000The Amprobe SC-3500 4? Signal Clamp for AT-3500 attaches around a buried metallic pipe, cable, or wire to induce a transmitted signal into the feature for active location and tracing. It does not require direct contact with metal to transmit the signal and can transmit signal through insulation on wires and into cable and wire bundles, providing more accurate tracing than locating with just a receiver and transmitter. Accommodates conductors up to 4? in diameter. Transmits a 33 kilohertz (kHz) frequency supplied by the T-3500 Transmitter (included in the AT-3500 kit).With the Amprobe AT-2004-A Wire Tracer you can trace live, de-energized, or open (broken) wires buried behind walls up to 13 feet (4 m) thick, without interrupting power. It?s a great choice for finding wires in walls, locating breakers, neutrals, and ground lines, and zeroing in on shorts, ground faults, and broken wires. This electrical wire tracer doesn?t interfere with sensitive electronic equipment so it?s safe to use in data centers.
Weight4612125
Dimensions12 × 18 × 24 in4 × 10 × 2 in14 × 11.4 × 3.7 in11.9 × 10 × 5.8 in9.84 × 9.84 × 9.84 in17 × 14.6 × 6.8 in
Additional information
Weight 46 lbs
Dimensions 12 × 18 × 24 in
Weight 1 lbs
Dimensions 4 × 10 × 2 in
Weight 2 lbs
Dimensions 14 × 11.4 × 3.7 in
Weight 1 lbs
Dimensions 11.9 × 10 × 5.8 in
Weight 2 lbs
Dimensions 9.84 × 9.84 × 9.84 in
Weight 5 lbs
Dimensions 17 × 14.6 × 6.8 in