In Stock

GWInstek GPT-15003 AC 500VA AC/DC/IR Electrical Safety Analyzer

Available for Quote

Safety Analyzer, AC/DC/IR/GC 200VA

  • Instek’s flagship safety analyzer series
  • AC (0.05 – 5kV)
  • DC (0.05 – 6kV)
  • IR (50 – 1200V DC / 0.1M – 50G Ω)
  • Complies with IEC 61010-2-034
  • 7”TFT LCD
  • Manual / Auto Mode
  • RMS Current Measurement
  • Zero Crossing Turn-on Operation
  • Controllable Ramp-up & Ramp-down Time
  • Capacitive Load Testing Capability up to 47μF

More Detail

Quick Comparison

SettingsGWInstek GPT-15003 AC 500VA AC/DC/IR Electrical Safety Analyzer removeAmprobe AT-6000-T Transmitter removeAmprobe R2000 Receiver For Wire Tracers removeAmprobe MLS55-3 Pipe Transmitter for AT-3500 removeAmprobe TACH-10 Tachometer with Contact and Non-Contact Measurement removeAmprobe AT-2005-A Advanced Wire Tracer remove
Image
SKUN_GW Instek GPT-15003N_Amprobe AT-6000-TN_Amprobe R2000N_Amprobe MLS55-3N_Amprobe TACH-10N_Amprobe AT-2005-A
Rating
PriceAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for Quote
Stock
Availability
Add to cart

Add to cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Description

Safety Analyzer, AC/DC/IR/GC 200VA

  • Instek’s flagship safety analyzer series
  • AC (0.05 - 5kV)
  • DC (0.05 - 6kV)
  • IR (50 - 1200V DC / 0.1M - 50G Ω)
  • Complies with IEC 61010-2-034
  • 7”TFT LCD
  • Manual / Auto Mode
  • RMS Current Measurement
  • Zero Crossing Turn-on Operation
  • Controllable Ramp-up & Ramp-down Time
  • Capacitive Load Testing Capability up to 47μF
More Detail
ContentThe AT-6000-T Transmitter works on Energized and De-energized circuits up to 600 V AC/DC in Category I through Category III electrical environments and features high signal, low signal, and loop modes. The Breaker Identification feature eliminates confusion of multiple false positives, common with older technology tracing tools, by identifying the one correct breaker or fuse with the highest recorded signal.Use for Wire Tracer series AT-2000The Amprobe MLS55-3 Pipe transmitter is an optional accessory for the AT-3500 underground cable locator that allows for pinpointing places in pipes, ducts, etc. It can be inserted to the pipe/duct using standard fish tape or a duct rodder and can accommodate pipes over 2? (5 cm) in diameter.Universal, economical tachometer measuring rotational or surface speed either in contact or non-contact way. Widely used to measure rotational speed of motors, conveyer belts and other moving or rotating systems.Like the AT-2004, the Amprobe AT-2005 Wire Tracer traces live wires buried or hidden behind walls up to 13 feet (4 m) thick without interrupting power. However, the AT-2005 electrical wire tracer also includes a battery booster that strengthens the signal for more accurately tracing opens and finding wires in walls. The AT-2005 is used for quickly locating breakers, broken wires, neutrals, grounds, shorts and pinpointing ground faults.
Weight4611118
Dimensions8 × 22 × 16 in9.5 × 6.5 × 1.75 in11.9 × 10 × 5.8 in7.1 × 5.3 × 3.7 in10.2 × 7 × 3.2 in19.9 × 17.2 × 12.5 in
Additional information
Weight 46 lbs
Dimensions 8 × 22 × 16 in
Weight 1 lbs
Dimensions 9.5 × 6.5 × 1.75 in
Weight 1 lbs
Dimensions 11.9 × 10 × 5.8 in
Weight 1 lbs
Dimensions 7.1 × 5.3 × 3.7 in
Weight 1 lbs
Dimensions 10.2 × 7 × 3.2 in
Weight 8 lbs
Dimensions 19.9 × 17.2 × 12.5 in