In Stock

GWInstek GPT-15003 AC 500VA AC/DC/IR Electrical Safety Analyzer

Available for Quote

Safety Analyzer, AC/DC/IR/GC 200VA

  • Instek’s flagship safety analyzer series
  • AC (0.05 – 5kV)
  • DC (0.05 – 6kV)
  • IR (50 – 1200V DC / 0.1M – 50G Ω)
  • Complies with IEC 61010-2-034
  • 7”TFT LCD
  • Manual / Auto Mode
  • RMS Current Measurement
  • Zero Crossing Turn-on Operation
  • Controllable Ramp-up & Ramp-down Time
  • Capacitive Load Testing Capability up to 47μF

More Detail

Quick Comparison

SettingsGWInstek GPT-15003 AC 500VA AC/DC/IR Electrical Safety Analyzer removeAmprobe SC-3500 4? Signal Clamp for AT-3500 removeAmprobe AT-6000-T Transmitter removeAmprobe AMB-25 Digital Insulation Resistance Tester removeAmprobe AMB-55 Industrial High-Voltage Insulation Tester removeAmprobe CT-53 3000A Flexible 3-Sensor Current Transducer for DM-5 remove
Image
SKUN_GW Instek GPT-15003N_Amprobe SC-3500N_Amprobe AT-6000-TN_Amprobe AMB-25N_Amprobe AMB-55N_Amprobe CT-53
Rating
PriceAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for Quote
Stock
Availability
Add to cart

Add to cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Description

Safety Analyzer, AC/DC/IR/GC 200VA

  • Instek’s flagship safety analyzer series
  • AC (0.05 - 5kV)
  • DC (0.05 - 6kV)
  • IR (50 - 1200V DC / 0.1M - 50G Ω)
  • Complies with IEC 61010-2-034
  • 7”TFT LCD
  • Manual / Auto Mode
  • RMS Current Measurement
  • Zero Crossing Turn-on Operation
  • Controllable Ramp-up & Ramp-down Time
  • Capacitive Load Testing Capability up to 47μF
More Detail
ContentThe Amprobe SC-3500 4? Signal Clamp for AT-3500 attaches around a buried metallic pipe, cable, or wire to induce a transmitted signal into the feature for active location and tracing. It does not require direct contact with metal to transmit the signal and can transmit signal through insulation on wires and into cable and wire bundles, providing more accurate tracing than locating with just a receiver and transmitter. Accommodates conductors up to 4? in diameter. Transmits a 33 kilohertz (kHz) frequency supplied by the T-3500 Transmitter (included in the AT-3500 kit).The AT-6000-T Transmitter works on Energized and De-energized circuits up to 600 V AC/DC in Category I through Category III electrical environments and features high signal, low signal, and loop modes. The Breaker Identification feature eliminates confusion of multiple false positives, common with older technology tracing tools, by identifying the one correct breaker or fuse with the highest recorded signal.This affordable and rugged megohmmeter is fast and easy to use, and offer the features you need for most insulation test applications including wires, cables, transformers and motors.Eliminate downtime, predict the lifetime of equipment and reduce safety hazards with the Amprobe AMB-55 Insulation Resistance Tester that tests voltage and step voltage to 5,500 V. You can accurately test cables, transformers, motors, surge arrestors and generators in noisy environments such as high voltage switchyards. It also boasts built-in noise rejection filters and shielded test leads to provide high EMI immunityAmprobe Flex Current Sensor Developed for the Amprobe DM-5, your all-in-one solution for excellent power quality.
Weight46213153
Dimensions8 × 22 × 16 in9.84 × 9.84 × 9.84 in9.5 × 6.5 × 1.75 in12.3 × 7.8 × 4.5 in17.3 × 5.8 × 13 in10 × 10 × 10 in
Additional information
Weight 46 lbs
Dimensions 8 × 22 × 16 in
Weight 2 lbs
Dimensions 9.84 × 9.84 × 9.84 in
Weight 1 lbs
Dimensions 9.5 × 6.5 × 1.75 in
Weight 3 lbs
Dimensions 12.3 × 7.8 × 4.5 in
Weight 15 lbs
Dimensions 17.3 × 5.8 × 13 in
Weight 3 lbs
Dimensions 10 × 10 × 10 in