In Stock

Amprobe TMULD-300 Ultrasonic Leak Detector with Transmitter

Available for Quote

View List

Description

When leaks occur they often generate an ultrasonic frequency that is beyond human hearing. Amprobe?s TMULD-300 converts these sounds into an audible range for easy detection. The TMULD-300 tests pressurized air lines, refrigeration systems, and steam lines for leaks. Quickly and easily locate a leak location with this unique device.

Quick Comparison

SettingsAmprobe TMULD-300 Ultrasonic Leak Detector with Transmitter removeAmprobe AMB-45 Insulation Resistance Tester removeAmprobe SC-3500 4? Signal Clamp for AT-3500 removeAmprobe TMA-21HW Hotwire Anemometer with Temperature removeAmprobe R2000 Receiver For Wire Tracers removeAmprobe AT-2004-A Advanced Wire Tracer remove
Image
SKUN_Amprobe TMULD-300N_Amprobe AMB-45N_Amprobe SC-3500N_Amprobe TMA-21HWN_Amprobe R2000N_Amprobe AT-2004-A
Rating
PriceAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for Quote
Stock
Availability
Add to cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Description
ContentWhen leaks occur they often generate an ultrasonic frequency that is beyond human hearing. Amprobe?s TMULD-300 converts these sounds into an audible range for easy detection. The TMULD-300 tests pressurized air lines, refrigeration systems, and steam lines for leaks. Quickly and easily locate a leak location with this unique device.Test insulation of wires, cables, transformers and electrical motors quickly and easily with this rugged tester.The Amprobe SC-3500 4? Signal Clamp for AT-3500 attaches around a buried metallic pipe, cable, or wire to induce a transmitted signal into the feature for active location and tracing. It does not require direct contact with metal to transmit the signal and can transmit signal through insulation on wires and into cable and wire bundles, providing more accurate tracing than locating with just a receiver and transmitter. Accommodates conductors up to 4? in diameter. Transmits a 33 kilohertz (kHz) frequency supplied by the T-3500 Transmitter (included in the AT-3500 kit).The Amprobe TMA-21HW Hotwire anemometer technology eliminates the use of bearings and rotating parts. When compared to standard bearing type probes, the compact Amprobe hotwire sensor is more reliable (no mechanical moving parts) and allows for easier access to duct and confined spaces. The Amprobe TMA-21HW Hotwire anemometer measures air flow volume and velocity, it features a telescopic probe for positioning the sensor, and is used by HVAC/R technicians to measure wind flow and temperature in air conditioning systems.Use for Wire Tracer series AT-2000With the Amprobe AT-2004-A Wire Tracer you can trace live, de-energized, or open (broken) wires buried behind walls up to 13 feet (4 m) thick, without interrupting power. It?s a great choice for finding wires in walls, locating breakers, neutrals, and ground lines, and zeroing in on shorts, ground faults, and broken wires. This electrical wire tracer doesn?t interfere with sensitive electronic equipment so it?s safe to use in data centers.
Weight332215
Dimensions12.3 × 10.4 × 5.7 in12.3 × 7.8 × 4.5 in9.84 × 9.84 × 9.84 in14 × 11.4 × 3.7 in11.9 × 10 × 5.8 in17 × 14.6 × 6.8 in
Additional information
Weight 3 lbs
Dimensions 12.3 × 10.4 × 5.7 in
Weight 3 lbs
Dimensions 12.3 × 7.8 × 4.5 in
Weight 2 lbs
Dimensions 9.84 × 9.84 × 9.84 in
Weight 2 lbs
Dimensions 14 × 11.4 × 3.7 in
Weight 1 lbs
Dimensions 11.9 × 10 × 5.8 in
Weight 5 lbs
Dimensions 17 × 14.6 × 6.8 in