In Stock

Amprobe TMA40-A Datalogging Anemometer

Available for Quote

View List

Description

The Amprobe TMA40-A provides three measurements in one: Air Velocity or volume, Relative Humidity and Temperature. With three ways to view your measurement results. Choose between single point measurement, multiple points up to 99, or the added feature of data logging up to 2400 data points. User sets the measurement interval time from 1 to 200 seconds. The TMA40-A has a flexible cord to position vane where you need to measure. For accurate CFM results, the user simply inputs the area of the air source. TMA40-A ships with USB interface cable, Software CD, hard carrying case and user manual.

Quick Comparison

SettingsAmprobe TMA40-A Datalogging Anemometer removeAmprobe AT-2005-A Advanced Wire Tracer removeAmprobe AT-2004-A Advanced Wire Tracer removeAmprobe TMA-21HW Hotwire Anemometer with Temperature removeAmprobe MLS55-3 Pipe Transmitter for AT-3500 removeAEMC 6527 4G Ohm, 250V/500V/1000V Digital Megohmmeter remove
Image
SKUN_Amprobe TMA40-AN_Amprobe AT-2005-AN_Amprobe AT-2004-AN_Amprobe TMA-21HWN_Amprobe MLS55-3N_AEMC 6527
Rating
PriceAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for Quote
Stock
Availability
Add to cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Description
ContentThe Amprobe TMA40-A provides three measurements in one: Air Velocity or volume, Relative Humidity and Temperature. With three ways to view your measurement results. Choose between single point measurement, multiple points up to 99, or the added feature of data logging up to 2400 data points. User sets the measurement interval time from 1 to 200 seconds. The TMA40-A has a flexible cord to position vane where you need to measure. For accurate CFM results, the user simply inputs the area of the air source. TMA40-A ships with USB interface cable, Software CD, hard carrying case and user manual.Like the AT-2004, the Amprobe AT-2005 Wire Tracer traces live wires buried or hidden behind walls up to 13 feet (4 m) thick without interrupting power. However, the AT-2005 electrical wire tracer also includes a battery booster that strengthens the signal for more accurately tracing opens and finding wires in walls. The AT-2005 is used for quickly locating breakers, broken wires, neutrals, grounds, shorts and pinpointing ground faults.With the Amprobe AT-2004-A Wire Tracer you can trace live, de-energized, or open (broken) wires buried behind walls up to 13 feet (4 m) thick, without interrupting power. It?s a great choice for finding wires in walls, locating breakers, neutrals, and ground lines, and zeroing in on shorts, ground faults, and broken wires. This electrical wire tracer doesn?t interfere with sensitive electronic equipment so it?s safe to use in data centers.The Amprobe TMA-21HW Hotwire anemometer technology eliminates the use of bearings and rotating parts. When compared to standard bearing type probes, the compact Amprobe hotwire sensor is more reliable (no mechanical moving parts) and allows for easier access to duct and confined spaces. The Amprobe TMA-21HW Hotwire anemometer measures air flow volume and velocity, it features a telescopic probe for positioning the sensor, and is used by HVAC/R technicians to measure wind flow and temperature in air conditioning systems.The Amprobe MLS55-3 Pipe transmitter is an optional accessory for the AT-3500 underground cable locator that allows for pinpointing places in pipes, ducts, etc. It can be inserted to the pipe/duct using standard fish tape or a duct rodder and can accommodate pipes over 2? (5 cm) in diameter.
Weight285212
Dimensions3.3 × 14.5 × 9 in19.9 × 17.2 × 12.5 in17 × 14.6 × 6.8 in14 × 11.4 × 3.7 in7.1 × 5.3 × 3.7 in10 × 5 × 5 in
Additional information
Weight 2 lbs
Dimensions 3.3 × 14.5 × 9 in
Weight 8 lbs
Dimensions 19.9 × 17.2 × 12.5 in
Weight 5 lbs
Dimensions 17 × 14.6 × 6.8 in
Weight 2 lbs
Dimensions 14 × 11.4 × 3.7 in
Weight 1 lbs
Dimensions 7.1 × 5.3 × 3.7 in
Weight 2 lbs
Dimensions 10 × 5 × 5 in