In Stock

Amprobe SC-3500 4? Signal Clamp for AT-3500

Available for Quote

View List

Description

The Amprobe SC-3500 4? Signal Clamp for AT-3500 attaches around a buried metallic pipe, cable, or wire to induce a transmitted signal into the feature for active location and tracing. It does not require direct contact with metal to transmit the signal and can transmit signal through insulation on wires and into cable and wire bundles, providing more accurate tracing than locating with just a receiver and transmitter. Accommodates conductors up to 4? in diameter. Transmits a 33 kilohertz (kHz) frequency supplied by the T-3500 Transmitter (included in the AT-3500 kit).

Quick Comparison

SettingsAmprobe SC-3500 4? Signal Clamp for AT-3500 removeAmprobe R2000 Receiver For Wire Tracers removeAEMC 6527 4G Ohm, 250V/500V/1000V Digital Megohmmeter removeAmprobe TMA40-A Datalogging Anemometer removeAmprobe AMB-45 Insulation Resistance Tester removeAmprobe AT-2005-A Advanced Wire Tracer remove
Image
SKUN_Amprobe SC-3500N_Amprobe R2000N_AEMC 6527N_Amprobe TMA40-AN_Amprobe AMB-45N_Amprobe AT-2005-A
Rating
PriceAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for Quote
Stock
Availability
Add to cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Description
ContentThe Amprobe SC-3500 4? Signal Clamp for AT-3500 attaches around a buried metallic pipe, cable, or wire to induce a transmitted signal into the feature for active location and tracing. It does not require direct contact with metal to transmit the signal and can transmit signal through insulation on wires and into cable and wire bundles, providing more accurate tracing than locating with just a receiver and transmitter. Accommodates conductors up to 4? in diameter. Transmits a 33 kilohertz (kHz) frequency supplied by the T-3500 Transmitter (included in the AT-3500 kit).Use for Wire Tracer series AT-2000The Amprobe TMA40-A provides three measurements in one: Air Velocity or volume, Relative Humidity and Temperature. With three ways to view your measurement results. Choose between single point measurement, multiple points up to 99, or the added feature of data logging up to 2400 data points. User sets the measurement interval time from 1 to 200 seconds. The TMA40-A has a flexible cord to position vane where you need to measure. For accurate CFM results, the user simply inputs the area of the air source. TMA40-A ships with USB interface cable, Software CD, hard carrying case and user manual.Test insulation of wires, cables, transformers and electrical motors quickly and easily with this rugged tester.Like the AT-2004, the Amprobe AT-2005 Wire Tracer traces live wires buried or hidden behind walls up to 13 feet (4 m) thick without interrupting power. However, the AT-2005 electrical wire tracer also includes a battery booster that strengthens the signal for more accurately tracing opens and finding wires in walls. The AT-2005 is used for quickly locating breakers, broken wires, neutrals, grounds, shorts and pinpointing ground faults.
Weight212238
Dimensions9.84 × 9.84 × 9.84 in11.9 × 10 × 5.8 in10 × 5 × 5 in3.3 × 14.5 × 9 in12.3 × 7.8 × 4.5 in19.9 × 17.2 × 12.5 in
Additional information
Weight 2 lbs
Dimensions 9.84 × 9.84 × 9.84 in
Weight 1 lbs
Dimensions 11.9 × 10 × 5.8 in
Weight 2 lbs
Dimensions 10 × 5 × 5 in
Weight 2 lbs
Dimensions 3.3 × 14.5 × 9 in
Weight 3 lbs
Dimensions 12.3 × 7.8 × 4.5 in
Weight 8 lbs
Dimensions 19.9 × 17.2 × 12.5 in