In Stock

Amprobe SC-3500 4? Signal Clamp for AT-3500

Available for Quote

View List

Description

The Amprobe SC-3500 4? Signal Clamp for AT-3500 attaches around a buried metallic pipe, cable, or wire to induce a transmitted signal into the feature for active location and tracing. It does not require direct contact with metal to transmit the signal and can transmit signal through insulation on wires and into cable and wire bundles, providing more accurate tracing than locating with just a receiver and transmitter. Accommodates conductors up to 4? in diameter. Transmits a 33 kilohertz (kHz) frequency supplied by the T-3500 Transmitter (included in the AT-3500 kit).

Quick Comparison

SettingsAmprobe SC-3500 4? Signal Clamp for AT-3500 removeAmprobe AMB-45 Insulation Resistance Tester removeAmprobe TACH-20 Tachometer with Contact and Non-Contact Measurement removeAmprobe R2000 Receiver For Wire Tracers removeAmprobe LM-120 Light Meter removeAmprobe MLS55-3 Pipe Transmitter for AT-3500 remove
Image
SKUN_Amprobe SC-3500N_Amprobe AMB-45N_Amprobe TACH-20N_Amprobe R2000N_Amprobe LM-120N_Amprobe MLS55-3
Rating
PriceAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for Quote
Stock
Availability
Add to cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Description
ContentThe Amprobe SC-3500 4? Signal Clamp for AT-3500 attaches around a buried metallic pipe, cable, or wire to induce a transmitted signal into the feature for active location and tracing. It does not require direct contact with metal to transmit the signal and can transmit signal through insulation on wires and into cable and wire bundles, providing more accurate tracing than locating with just a receiver and transmitter. Accommodates conductors up to 4? in diameter. Transmits a 33 kilohertz (kHz) frequency supplied by the T-3500 Transmitter (included in the AT-3500 kit).Test insulation of wires, cables, transformers and electrical motors quickly and easily with this rugged tester.The Amprobe TACH20 Hand-held Tachometer accurately measures rotational or surface speed as well as length. It comes with a large LCD display that allows the user to easily read the measurement. It also has a built in memory function that permits automatic storage of maximum, minimum, average values plus the last measurement displayed.Use for Wire Tracer series AT-2000The Amprobe LM-120 light meter measures the visible light from fluorescent, metal halide, high-pressure sodium or incandescent sources. It is a portable, easy-to-use digital light meter designed for simple one-hand operation reading in Lumen (lux) or foot candle (fc) units. The LM-120 measures a wide range of light up to 20,000 fc or 200,000 lux with an accurate, high resolution of 0.01 fc/lux. This unit is Auto-ranging plus manual ranging with ability to Zero out the reading before taking a measurement.The Amprobe MLS55-3 Pipe transmitter is an optional accessory for the AT-3500 underground cable locator that allows for pinpointing places in pipes, ducts, etc. It can be inserted to the pipe/duct using standard fish tape or a duct rodder and can accommodate pipes over 2? (5 cm) in diameter.
Weight231111
Dimensions9.84 × 9.84 × 9.84 in12.3 × 7.8 × 4.5 in2 × 8.8 × 7.6 in11.9 × 10 × 5.8 in4 × 10 × 2 in7.1 × 5.3 × 3.7 in
Additional information
Weight 2 lbs
Dimensions 9.84 × 9.84 × 9.84 in
Weight 3 lbs
Dimensions 12.3 × 7.8 × 4.5 in
Weight 1 lbs
Dimensions 2 × 8.8 × 7.6 in
Weight 1 lbs
Dimensions 11.9 × 10 × 5.8 in
Weight 1 lbs
Dimensions 4 × 10 × 2 in
Weight 1 lbs
Dimensions 7.1 × 5.3 × 3.7 in