In Stock

Amprobe SC-3500 4? Signal Clamp for AT-3500

Available for Quote

View List

Description

The Amprobe SC-3500 4? Signal Clamp for AT-3500 attaches around a buried metallic pipe, cable, or wire to induce a transmitted signal into the feature for active location and tracing. It does not require direct contact with metal to transmit the signal and can transmit signal through insulation on wires and into cable and wire bundles, providing more accurate tracing than locating with just a receiver and transmitter. Accommodates conductors up to 4? in diameter. Transmits a 33 kilohertz (kHz) frequency supplied by the T-3500 Transmitter (included in the AT-3500 kit).

Quick Comparison

SettingsAmprobe SC-3500 4? Signal Clamp for AT-3500 removeAmprobe AT-6000-T Transmitter removeAmprobe LM-120 Light Meter removeAmprobe PRM-6 Phase Sequence and Motor Rotation Tester removeAmprobe TACH-10 Tachometer with Contact and Non-Contact Measurement removeAmprobe R2000 Receiver For Wire Tracers remove
Image
SKUN_Amprobe SC-3500N_Amprobe AT-6000-TN_Amprobe LM-120N_Amprobe PRM-6N_Amprobe TACH-10N_Amprobe R2000
Rating
PriceAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for Quote
Stock
Availability
Add to cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Description
ContentThe Amprobe SC-3500 4? Signal Clamp for AT-3500 attaches around a buried metallic pipe, cable, or wire to induce a transmitted signal into the feature for active location and tracing. It does not require direct contact with metal to transmit the signal and can transmit signal through insulation on wires and into cable and wire bundles, providing more accurate tracing than locating with just a receiver and transmitter. Accommodates conductors up to 4? in diameter. Transmits a 33 kilohertz (kHz) frequency supplied by the T-3500 Transmitter (included in the AT-3500 kit).The AT-6000-T Transmitter works on Energized and De-energized circuits up to 600 V AC/DC in Category I through Category III electrical environments and features high signal, low signal, and loop modes. The Breaker Identification feature eliminates confusion of multiple false positives, common with older technology tracing tools, by identifying the one correct breaker or fuse with the highest recorded signal.The Amprobe LM-120 light meter measures the visible light from fluorescent, metal halide, high-pressure sodium or incandescent sources. It is a portable, easy-to-use digital light meter designed for simple one-hand operation reading in Lumen (lux) or foot candle (fc) units. The LM-120 measures a wide range of light up to 20,000 fc or 200,000 lux with an accurate, high resolution of 0.01 fc/lux. This unit is Auto-ranging plus manual ranging with ability to Zero out the reading before taking a measurement.If you install or connect 3-phase motors and systems, you recognize the importance of verifying the correct motor rotation and wiring phase sequence. Improper connections can cause motors to rotate in reverse direction, potentially damaging the motor and the equipment it is powering.Universal, economical tachometer measuring rotational or surface speed either in contact or non-contact way. Widely used to measure rotational speed of motors, conveyer belts and other moving or rotating systems.Use for Wire Tracer series AT-2000
Weight211111
Dimensions9.84 × 9.84 × 9.84 in9.5 × 6.5 × 1.75 in4 × 10 × 2 in4 × 10 × 2 in10.2 × 7 × 3.2 in11.9 × 10 × 5.8 in
Additional information
Weight 2 lbs
Dimensions 9.84 × 9.84 × 9.84 in
Weight 1 lbs
Dimensions 9.5 × 6.5 × 1.75 in
Weight 1 lbs
Dimensions 4 × 10 × 2 in
Weight 1 lbs
Dimensions 4 × 10 × 2 in
Weight 1 lbs
Dimensions 10.2 × 7 × 3.2 in
Weight 1 lbs
Dimensions 11.9 × 10 × 5.8 in