In Stock

Amprobe AT-6000-T Transmitter

Available for Quote

View List
Add to wishlist
SKU: N_Amprobe AT-6000-T Category: Tag:

Description

The AT-6000-T Transmitter works on Energized and De-energized circuits up to 600 V AC/DC in Category I through Category III electrical environments and features high signal, low signal, and loop modes. The Breaker Identification feature eliminates confusion of multiple false positives, common with older technology tracing tools, by identifying the one correct breaker or fuse with the highest recorded signal.

Quick Comparison

SettingsAmprobe AT-6000-T Transmitter removeAmprobe LM-120 Light Meter removeAmprobe R2000 Receiver For Wire Tracers removeAmprobe TMA-21HW Hotwire Anemometer with Temperature removeAmprobe TMA40-A Datalogging Anemometer removeAmprobe PRM-6 Phase Sequence and Motor Rotation Tester remove
Image
SKUN_Amprobe AT-6000-TN_Amprobe LM-120N_Amprobe R2000N_Amprobe TMA-21HWN_Amprobe TMA40-AN_Amprobe PRM-6
Rating
PriceAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for Quote
Stock
Availability
Add to cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Description
ContentThe AT-6000-T Transmitter works on Energized and De-energized circuits up to 600 V AC/DC in Category I through Category III electrical environments and features high signal, low signal, and loop modes. The Breaker Identification feature eliminates confusion of multiple false positives, common with older technology tracing tools, by identifying the one correct breaker or fuse with the highest recorded signal.The Amprobe LM-120 light meter measures the visible light from fluorescent, metal halide, high-pressure sodium or incandescent sources. It is a portable, easy-to-use digital light meter designed for simple one-hand operation reading in Lumen (lux) or foot candle (fc) units. The LM-120 measures a wide range of light up to 20,000 fc or 200,000 lux with an accurate, high resolution of 0.01 fc/lux. This unit is Auto-ranging plus manual ranging with ability to Zero out the reading before taking a measurement.Use for Wire Tracer series AT-2000The Amprobe TMA-21HW Hotwire anemometer technology eliminates the use of bearings and rotating parts. When compared to standard bearing type probes, the compact Amprobe hotwire sensor is more reliable (no mechanical moving parts) and allows for easier access to duct and confined spaces. The Amprobe TMA-21HW Hotwire anemometer measures air flow volume and velocity, it features a telescopic probe for positioning the sensor, and is used by HVAC/R technicians to measure wind flow and temperature in air conditioning systems.The Amprobe TMA40-A provides three measurements in one: Air Velocity or volume, Relative Humidity and Temperature. With three ways to view your measurement results. Choose between single point measurement, multiple points up to 99, or the added feature of data logging up to 2400 data points. User sets the measurement interval time from 1 to 200 seconds. The TMA40-A has a flexible cord to position vane where you need to measure. For accurate CFM results, the user simply inputs the area of the air source. TMA40-A ships with USB interface cable, Software CD, hard carrying case and user manual.If you install or connect 3-phase motors and systems, you recognize the importance of verifying the correct motor rotation and wiring phase sequence. Improper connections can cause motors to rotate in reverse direction, potentially damaging the motor and the equipment it is powering.
Weight111221
Dimensions9.5 × 6.5 × 1.75 in4 × 10 × 2 in11.9 × 10 × 5.8 in14 × 11.4 × 3.7 in3.3 × 14.5 × 9 in4 × 10 × 2 in
Additional information
Weight 1 lbs
Dimensions 9.5 × 6.5 × 1.75 in
Weight 1 lbs
Dimensions 4 × 10 × 2 in
Weight 1 lbs
Dimensions 11.9 × 10 × 5.8 in
Weight 2 lbs
Dimensions 14 × 11.4 × 3.7 in
Weight 2 lbs
Dimensions 3.3 × 14.5 × 9 in
Weight 1 lbs
Dimensions 4 × 10 × 2 in

Related products