In Stock

Amprobe AT-2005-A Advanced Wire Tracer

Available for Quote

View List
Add to wishlist
SKU: N_Amprobe AT-2005-A Category: Tag:

Description

Like the AT-2004, the Amprobe AT-2005 Wire Tracer traces live wires buried or hidden behind walls up to 13 feet (4 m) thick without interrupting power. However, the AT-2005 electrical wire tracer also includes a battery booster that strengthens the signal for more accurately tracing opens and finding wires in walls. The AT-2005 is used for quickly locating breakers, broken wires, neutrals, grounds, shorts and pinpointing ground faults.

Quick Comparison

SettingsAmprobe AT-2005-A Advanced Wire Tracer removeAmprobe SC-3500 4? Signal Clamp for AT-3500 removeAmprobe MLS55-3 Pipe Transmitter for AT-3500 removeAmprobe AT-2004-A Advanced Wire Tracer removeAmprobe CT-500 1000A Flexible Current Sensor for DM-5 removeAmprobe PRM-6 Phase Sequence and Motor Rotation Tester remove
Image
SKUN_Amprobe AT-2005-AN_Amprobe SC-3500N_Amprobe MLS55-3N_Amprobe AT-2004-AN_Amprobe CT-500N_Amprobe PRM-6
Rating
PriceAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for Quote
Stock
Availability
Add to cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Description
ContentLike the AT-2004, the Amprobe AT-2005 Wire Tracer traces live wires buried or hidden behind walls up to 13 feet (4 m) thick without interrupting power. However, the AT-2005 electrical wire tracer also includes a battery booster that strengthens the signal for more accurately tracing opens and finding wires in walls. The AT-2005 is used for quickly locating breakers, broken wires, neutrals, grounds, shorts and pinpointing ground faults.The Amprobe SC-3500 4? Signal Clamp for AT-3500 attaches around a buried metallic pipe, cable, or wire to induce a transmitted signal into the feature for active location and tracing. It does not require direct contact with metal to transmit the signal and can transmit signal through insulation on wires and into cable and wire bundles, providing more accurate tracing than locating with just a receiver and transmitter. Accommodates conductors up to 4? in diameter. Transmits a 33 kilohertz (kHz) frequency supplied by the T-3500 Transmitter (included in the AT-3500 kit).The Amprobe MLS55-3 Pipe transmitter is an optional accessory for the AT-3500 underground cable locator that allows for pinpointing places in pipes, ducts, etc. It can be inserted to the pipe/duct using standard fish tape or a duct rodder and can accommodate pipes over 2? (5 cm) in diameter.With the Amprobe AT-2004-A Wire Tracer you can trace live, de-energized, or open (broken) wires buried behind walls up to 13 feet (4 m) thick, without interrupting power. It?s a great choice for finding wires in walls, locating breakers, neutrals, and ground lines, and zeroing in on shorts, ground faults, and broken wires. This electrical wire tracer doesn?t interfere with sensitive electronic equipment so it?s safe to use in data centers.Amprobe Flex Current Sensor Developed for the Amprobe DM-5, your all-in-one solution for excellent power quality.If you install or connect 3-phase motors and systems, you recognize the importance of verifying the correct motor rotation and wiring phase sequence. Improper connections can cause motors to rotate in reverse direction, potentially damaging the motor and the equipment it is powering.
Weight821521
Dimensions19.9 × 17.2 × 12.5 in9.84 × 9.84 × 9.84 in7.1 × 5.3 × 3.7 in17 × 14.6 × 6.8 in10 × 10 × 10 in4 × 10 × 2 in
Additional information
Weight 8 lbs
Dimensions 19.9 × 17.2 × 12.5 in
Weight 2 lbs
Dimensions 9.84 × 9.84 × 9.84 in
Weight 1 lbs
Dimensions 7.1 × 5.3 × 3.7 in
Weight 5 lbs
Dimensions 17 × 14.6 × 6.8 in
Weight 2 lbs
Dimensions 10 × 10 × 10 in
Weight 1 lbs
Dimensions 4 × 10 × 2 in

Related products