In Stock

Amprobe AMB-50 Industrial High-Voltage Insulation Tester

Available for Quote

View List
Add to wishlist
SKU: N_Amprobe_AMB-50 Category: Tag:

Description

The Amprobe AMB-50 High-Voltage Insulation Tester has the necessary features for professional insulation diagnostics. It features calculation of PI and DAR parameters. The pass/fail comparison function helps to improve testing productivity. Readings are clearly displayed on a large backlit LCD display. Windows compatible PC Software and USB communications port serve for connecting the instrument to the PC and management of the recorded test data.

Quick Comparison

SettingsAmprobe AMB-50 Industrial High-Voltage Insulation Tester removeAmprobe TMA40-A Datalogging Anemometer removeAmprobe MLS55-3 Pipe Transmitter for AT-3500 removeAmprobe TACH-20 Tachometer with Contact and Non-Contact Measurement removeAmprobe AT-6000-R Wire Tracer Receiver with Back Light LCD Display removeAmprobe CT-53 3000A Flexible 3-Sensor Current Transducer for DM-5 remove
Image
SKUN_Amprobe_AMB-50N_Amprobe TMA40-AN_Amprobe MLS55-3N_Amprobe TACH-20N_Amprobe AT-6000-RN_Amprobe CT-53
Rating
PriceAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for Quote
Stock
Availability
Add to cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Description
ContentThe Amprobe AMB-50 High-Voltage Insulation Tester has the necessary features for professional insulation diagnostics. It features calculation of PI and DAR parameters. The pass/fail comparison function helps to improve testing productivity. Readings are clearly displayed on a large backlit LCD display. Windows compatible PC Software and USB communications port serve for connecting the instrument to the PC and management of the recorded test data.The Amprobe TMA40-A provides three measurements in one: Air Velocity or volume, Relative Humidity and Temperature. With three ways to view your measurement results. Choose between single point measurement, multiple points up to 99, or the added feature of data logging up to 2400 data points. User sets the measurement interval time from 1 to 200 seconds. The TMA40-A has a flexible cord to position vane where you need to measure. For accurate CFM results, the user simply inputs the area of the air source. TMA40-A ships with USB interface cable, Software CD, hard carrying case and user manual.The Amprobe MLS55-3 Pipe transmitter is an optional accessory for the AT-3500 underground cable locator that allows for pinpointing places in pipes, ducts, etc. It can be inserted to the pipe/duct using standard fish tape or a duct rodder and can accommodate pipes over 2? (5 cm) in diameter.The Amprobe TACH20 Hand-held Tachometer accurately measures rotational or surface speed as well as length. It comes with a large LCD display that allows the user to easily read the measurement. It also has a built in memory function that permits automatic storage of maximum, minimum, average values plus the last measurement displayed.Amprobe?s advanced wire tracer technology combines a Receiver and powerful Transmitter to locate energized and de-energized wires, breakers, and fuses without having to disconnect any equipment. The Receiver features four tracing modes optimized for a range of applications, and the Transmitter utilizes two optimized frequencies that allows for a clean and reliable signal. Whether you?re a novice user or an expert, the AT-6000 Advanced Wire Tracer Series kits will help you get the job done fast.Amprobe Flex Current Sensor Developed for the Amprobe DM-5, your all-in-one solution for excellent power quality.
Weight621113
Dimensions10 × 8 × 4.5 in3.3 × 14.5 × 9 in7.1 × 5.3 × 3.7 in2 × 8.8 × 7.6 in9.5 × 6.5 × 1.75 in10 × 10 × 10 in
Additional information
Weight 6 lbs
Dimensions 10 × 8 × 4.5 in
Weight 2 lbs
Dimensions 3.3 × 14.5 × 9 in
Weight 1 lbs
Dimensions 7.1 × 5.3 × 3.7 in
Weight 1 lbs
Dimensions 2 × 8.8 × 7.6 in
Weight 1 lbs
Dimensions 9.5 × 6.5 × 1.75 in
Weight 3 lbs
Dimensions 10 × 10 × 10 in

Related products