Wire Mapper Pro Model CA7028 (LAN Cable Tester)
Available for Quote
The Wire Mapper Pro Model CA7028 is a hand-held structured cable mapping and troubleshooting tester designed for use on UTP, STP, FTP, and SSTP cabling equipped with RJ-45 connectors and wired to either TIA568A/B ISO11801 and EN 50137, USOC or ISDN specifications. It detects open circuit pairs, shorts, crossed wires, crossed pairs, reversed pairs, split pairs and shield faults. The Model CA7028 also has the ability to identify telephone and data lines. If the main unit is plugged into an operational RJ-45 socket, it will give a continuous warning tone and display if a telephone voltage is present on any of the pins. If the Service Detect key is pressed, it will check and display telephone, 10BaseT, 100Mbit+ and token ring active service.
Quick Comparison
| Settings | Wire Mapper Pro Model CA7028 (LAN Cable Tester) remove | Clamp-on Meter Model 514 (AC/DC, TRMS, 1000AAC/DC, 750VAC/1000VDC, Hz, Ohms, Continuity) remove | Power Clamp-on Meter Model 405 (TRMS, 1000VAC/DC, 1000AAC/1500ADC, Ohms, Continuity, Phase Rotation, Power, THD) remove | Clamp-on Meter Model 603 (TRMS, 1000VAC/DC, 2000AAC/3000ADC, Ohms, Continuity, Temperature) remove | Clamp-on Meter Model CM605 (100AAC/DC, Low Current) remove | AEMC 6418 Ground Resistance Tester remove | ||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Image | |  |  |  |  |  | ||||||||||||||||||||||||
| SKU | N_AEMC CA7028 | N_AEMC 514 | N_AEMC 405 | N_AEMC 603 | N_AEMC CM605 | N_AEMC 6418 | ||||||||||||||||||||||||
| Rating | ||||||||||||||||||||||||||||||
| Price | Available for Quote | Available for Quote | Available for Quote | Available for Quote | Available for Quote | Available for Quote | ||||||||||||||||||||||||
| Stock | ||||||||||||||||||||||||||||||
| Availability | ||||||||||||||||||||||||||||||
| Add to cart | ||||||||||||||||||||||||||||||
| Description | The Wire Mapper Pro Model CA7028 is a hand-held structured cable mapping and troubleshooting tester designed for use on UTP, STP, FTP, and SSTP cabling equipped with RJ-45 connectors and wired to either TIA568A/B ISO11801 and EN 50137, USOC or ISDN specifications. It detects open circuit pairs, shorts, crossed wires, crossed pairs, reversed pairs, split pairs and shield faults. The Model CA7028 also has the ability to identify telephone and data lines. If the main unit is plugged into an operational RJ-45 socket, it will give a continuous warning tone and display if a telephone voltage is present on any of the pins. If the Service Detect key is pressed, it will check and display telephone, 10BaseT, 100Mbit+ and token ring active service. | The Clamp-on Meter Model 514 is a general purpose professional instrument that measures up to the toughest standards. It is built into a rugged mechanical case and is designed using quality polycarbonate materials. This meter offers a complete set of measurement ranges and is in compliance with international safety and quality standards to ensure a professional and reliable measuring tool. The Model 514 is auto-ranging and provides the best measurement range and resolution for troubleshooting. It has a high resolution 40A range. The Model 514 measures AC and DC current, AC and DC voltage, resistance, continuity with beeper, and frequency from V or A. It also features a diode test function. The Model 514 also uses Hall sensor technology that provides both DC and AC current measurements to 1000A. The Model 514 is sized for comfortable, one-handed operation. This model is True RMS sensing responding to distorted signal electrical systems. The jaw openingis 1.575" (40mm). | The Model CM605 is a versatile device that is capable of measuring both AC/DC voltage (up to 600V) and AC/DC current up to 100 Amps. It can also measure resistance up to 10k? and includes a continuity buzzer to assist in circuit verification. The Multifunction Clamp-on Meter Model CM605 is a good choice for both process and general industrial applications. It can detect milliamp process signals, as well as the higher currents up to 100A associated with general industrial monitoring and troubleshooting. For operator convenience, the Model CM605 can also hold the last reading in the display and capture the peak value at the time of the measurement. | |||||||||||||||||||||||||||
| Content | The Ground Resistance Tester Model 6418 measures ground rod, busbar, and grid resistance and impedance without the use of auxiliary rods. Clamp-on ground resistance testers can be used in multi-grounded systems without disconnecting or de-energizing the ground system under test. The Model 6418 simply clamps around the grounding electrode or conductor and measures the resistance to ground. By performing measurements on intact ground systems, the user also verifies the quality of the grounding connections and bonds. Resistance and continuity of grounding loops around pads and buildings may also be measured. | |||||||||||||||||||||||||||||
| Weight | 9 | 9 | 9 | 9 | 9 | 3.5 | ||||||||||||||||||||||||
| Dimensions | 5 × 5 × 5 in | 6 × 6 × 12 in | 6 × 6 × 12 in | 6 × 6 × 12 in | 6 × 6 × 12 in | 12 × 5 × 5 in | ||||||||||||||||||||||||
| Additional information |
|
|
|
|
|
|
