Wire Mapper Pro Model CA7028 (LAN Cable Tester)
Available for Quote
The Wire Mapper Pro Model CA7028 is a hand-held structured cable mapping and troubleshooting tester designed for use on UTP, STP, FTP, and SSTP cabling equipped with RJ-45 connectors and wired to either TIA568A/B ISO11801 and EN 50137, USOC or ISDN specifications. It detects open circuit pairs, shorts, crossed wires, crossed pairs, reversed pairs, split pairs and shield faults. The Model CA7028 also has the ability to identify telephone and data lines. If the main unit is plugged into an operational RJ-45 socket, it will give a continuous warning tone and display if a telephone voltage is present on any of the pins. If the Service Detect key is pressed, it will check and display telephone, 10BaseT, 100Mbit+ and token ring active service.
Quick Comparison
| Settings | Wire Mapper Pro Model CA7028 (LAN Cable Tester) remove | Power Clamp-on Meter Model 205 (TRMS, 1000VAC/DC, 600AAC/900ADC, Ohms, Continuity, Phase Rotation, Power, THD) remove | AEMC 6416 Ground Resistance Tester remove | AEMC 6527 4G Ohm, 250V/500V/1000V Digital Megohmmeter remove | Calibration of AEMC 6418 Ground Resistance Tester NIST Calibration with Certificate remove | AEMC 6420 Micro-Ohmmeter, 10-Amp, 1µ Ohms to 400 Ohms remove | ||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Image | |  |  |  |  |  | ||||||||||||||||||||||||
| SKU | N_AEMC CA7028 | N_AEMC 205 | N_AEMC 6416 | N_AEMC 6527 | C_AEMC 6418 | N_AEMC 6240 | ||||||||||||||||||||||||
| Rating | ||||||||||||||||||||||||||||||
| Price | Available for Quote | Available for Quote | Available for Quote | Available for Quote | Available for Quote | Available for Quote | ||||||||||||||||||||||||
| Stock | ||||||||||||||||||||||||||||||
| Availability | ||||||||||||||||||||||||||||||
| Add to cart | ||||||||||||||||||||||||||||||
| Description | The Wire Mapper Pro Model CA7028 is a hand-held structured cable mapping and troubleshooting tester designed for use on UTP, STP, FTP, and SSTP cabling equipped with RJ-45 connectors and wired to either TIA568A/B ISO11801 and EN 50137, USOC or ISDN specifications. It detects open circuit pairs, shorts, crossed wires, crossed pairs, reversed pairs, split pairs and shield faults. The Model CA7028 also has the ability to identify telephone and data lines. If the main unit is plugged into an operational RJ-45 socket, it will give a continuous warning tone and display if a telephone voltage is present on any of the pins. If the Service Detect key is pressed, it will check and display telephone, 10BaseT, 100Mbit+ and token ring active service. | All equipment calibrations do not include any equipment warranty. Equipment that has any visible sign of damage will be documented and the customer will be notified before any services are performed. Any needed repairs will be quoted separately. All of our items will ship with Warranty Void tamper resistant seals. If these seals have been removed or tampered with, the Calibration will be void. | ||||||||||||||||||||||||||||
| Content | The Ground Resistance Tester Model 6416 measures ground rod and grid resistance and impedance without the use of auxiliary rods. Clamp-on ground resistance testers can be used in multi-grounded systems without disconnecting or de-energizing the ground system under test. The Model 6416 simply clamps around the grounding electrode or conductor and measures the resistance to ground. By performing measurements on intact ground systems, the user also verifies the quality of the grounding connections and bonds. Resistance and continuity of grounding loops around pads and buildings may also be measured. | |||||||||||||||||||||||||||||
| Weight | 9 | 9 | 3.5 | 2 | 3 | 10 | ||||||||||||||||||||||||
| Dimensions | 5 × 5 × 5 in | 6 × 6 × 12 in | 12 × 5 × 5 in | 10 × 5 × 5 in | 6 × 10 × 4 in | 12 × 12 × 10 in | ||||||||||||||||||||||||
| Additional information |
|
|
|
|
|
|
