In Stock

Non-Contact High Voltage Detector Model 275HVD (240V to 275kV, Manual self-test)

Available for Quote

The Model 275HVD is designed to detect the presence of high voltage without physical contact. An 8 position rotary switch selects the detection range. As the sensor is moved closer to the voltage carrying conductor, its sensor head picks up the radiated electric field. Once the threshold is reached, the buzzer sounds and a bright red warning light alerts the operator of live conductors. The Model 275HVD is powered by three standard Alkaline C cell batteries and can be used both in- and out-of-doors. A universal spline on the back-end facilitates attachment to any standard hot stick. A self-test position ensures that all circuitry and annunciators are working properly before use.

View List
SKU: N_AEMC 275 HVD Category: Tag:

Quick Comparison

SettingsNon-Contact High Voltage Detector Model 275HVD (240V to 275kV, Manual self-test) removePower Clamp-on Meter Model 605 (TRMS, 1000VAC/DC, 2000AAC/3000ADC, Ohms, Continuity, Phase Rotation, Power, THD) removeCalibration of AEMC 6418 Ground Resistance Tester NIST Calibration with Certificate removeClamp-on Meter Model 403 (TRMS, 1000VAC/DC, 1000AAC/1500ADC, Ohms, Continuity, Temperature) removeClamp-on Meter Model 603 (TRMS, 1000VAC/DC, 2000AAC/3000ADC, Ohms, Continuity, Temperature) removeClamp-on Meter Model CM605 (100AAC/DC, Low Current) remove
Image
SKUN_AEMC 275 HVDN_AEMC 605C_AEMC 6418N_AEMC 403N_AEMC 603N_AEMC CM605
Rating
PriceAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for QuoteAvailable for Quote
Stock
Availability
Add to cart

Add to Cart

Add to Cart

Instant Quote

Add to Cart

Add to Cart

Add to Cart

DescriptionThe Model 275HVD is designed to detect the presence of high voltage without physical contact. An 8 position rotary switch selects the detection range. As the sensor is moved closer to the voltage carrying conductor, its sensor head picks up the radiated electric field. Once the threshold is reached, the buzzer sounds and a bright red warning light alerts the operator of live conductors. The Model 275HVD is powered by three standard Alkaline C cell batteries and can be used both in- and out-of-doors. A universal spline on the back-end facilitates attachment to any standard hot stick. A self-test position ensures that all circuitry and annunciators are working properly before use.All equipment calibrations do not include any equipment warranty. Equipment that has any visible sign of damage will be documented and the customer will be notified before any services are performed. Any needed repairs will be quoted separately. All of our items will ship with Warranty Void tamper resistant seals. If these seals have been removed or tampered with, the Calibration will be void.The Model CM605 is a versatile device that is capable of measuring both AC/DC voltage (up to 600V) and AC/DC current up to 100 Amps. It can also measure resistance up to 10k? and includes a continuity buzzer to assist in circuit verification. The Multifunction Clamp-on Meter Model CM605 is a good choice for both process and general industrial applications. It can detect milliamp process signals, as well as the higher currents up to 100A associated with general industrial monitoring and troubleshooting. For operator convenience, the Model CM605 can also hold the last reading in the display and capture the peak value at the time of the measurement.
Content
Weight993999
Dimensions5 × 5 × 5 in6 × 6 × 12 in6 × 10 × 4 in6 × 6 × 12 in6 × 6 × 12 in6 × 6 × 12 in
Additional information
Weight 9 lbs
Dimensions 5 × 5 × 5 in
Weight 9 lbs
Dimensions 6 × 6 × 12 in
Weight 3 lbs
Dimensions 6 × 10 × 4 in
Weight 9 lbs
Dimensions 6 × 6 × 12 in
Weight 9 lbs
Dimensions 6 × 6 × 12 in
Weight 9 lbs
Dimensions 6 × 6 × 12 in